Help! USB6008 card driver conflict?

I don't use usb6008 more than a year with DAQmx 9.1.7 no problem.

P0.0 output (Hi or Lo) served as the external switch.

Months ago, I bought the new usb6008 (it came with DAQmx 9.5.1).

I tried to use new usb6008 with the system (which has DAQmx 9.1.7) and

I found that the P0.0 port does not change its State. He Hi kept all the time.

Then I tested the new 6008 with measurement and Automation Explorer - digital output

selection section all the exits then P0.0 changed to hi lo, and this has worked, changed to Lo!

It's my mystery: why newly purchased USB does not work with the system.

who has DAQmx 9.1.7? I just swapped the USB6006, all the others are the same!

What is the conflict of Driver? It's confusing... Any idea or suggestion?

Thank you.

Does the program in your system hard-code the name of the device (by default, 'Dev1'), perhaps?

Devices are automatically named according to the order that the pilot sees assuming that the default values and have no other aircraft OR, your first USB-6008 would be 'Dev1' and your second USB-6008 "Dev2.

Try to use MAX to rename your new USB-6008 "Dev1", or whatever your old USB-6008 had been called. (You will need to delete or rename the old USB-6008 MAX.)

Tags: NI Hardware

Similar Questions

  • Recurrent BSODS even after the repair facility. Hardware failure? Driver conflict? Help, please!

    I was troubleshooting my BSOD for about a week and I need help.

    Here's where I am. I cleaned the chassis and reinstall all components. Then I ran memtest for 8 passes without error. Then I got Majorgeeks through my dieting rigorous anti-malware. And there is no malware on the computer.  I could not find any obvious driver conflict. So I ran SFC/scannow and it found some errors, he couldn't fix. So I finally did a repair installation to see if file system cleaning would eliminate blue screens.

    I always get a BSOD.

    Which leaves me with what? A bad GPU? Unknown driver conflict? Bad motherboard?

    Here comes bluescreenview log for you to look over. If someone could help me please clarify, I'd appreciate it really any help I can get.

    Thank you.

    ==================================================
    Dump file: 073014-27892 - 01.dmp
    Crash time: 30/07/2014-15:26:46
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000088
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'03656666
    Caused by the pilot: NDProxy.SYS
    Caused by the address: NDProxy.SYS + c8856a
    File description: NDIS Proxy
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
    CPU: x 64
    Plant address: ntoskrnl.exe + 75bc0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\073014-27892-01.dmp
    Number of processors: 6
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 286 280
    Dump of file time: 30/07/2014-15:27:42
    ==================================================

    ==================================================
    Dump file: 073014-27892 - 01.dmp
    Crash time: 30/07/2014-15:26:46
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000088
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'03656666
    Caused by the pilot: NDProxy.SYS
    Caused by the address: NDProxy.SYS + c8856a
    File description: NDIS Proxy
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)
    CPU: x 64
    Plant address: ntoskrnl.exe + 75bc0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\073014-27892-01.dmp
    Number of processors: 6
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 286 280
    Dump of file time: 30/07/2014-15:27:42
    ==================================================

    ==================================================
    Dump file: 080114 43243 - 01.dmp
    Crash time: 08/01/2014 12 h 22:50
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000088
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'036 has 3666
    Caused by the driver: vga.sys
    Caused by the address: vga.sys + 2a7f56a
    Description of the file: VGA/Super VGA video driver
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
    CPU: x 64
    Plant address: ntoskrnl.exe + 75bc0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\080114-43243-01.dmp
    Number of processors: 6
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 285 832
    Dump of file time: 01/08/2014-12:24:17 AM
    ==================================================

    ==================================================
    Dump file: 080114-29359 - 01.dmp
    Crash time: 01/08/2014-16:14:11
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000088
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'03663666
    Caused by the driver: USBPORT. SYS
    Caused by the address: USBPORT. SYS + 1156 has
    File description: driver Port USB 1.1 & 2.0
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
    CPU: x 64
    Plant address: ntoskrnl.exe + 75bc0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\080114-29359-01.dmp
    Number of processors: 6
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 286 344
    Dump of file time: 01/08/2014-16:15:09
    ==================================================

    ==================================================
    Dump file: 080414-142319 - 01.dmp
    Crash time: 08/04/2014-21:24:14
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000088
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'03662666
    Caused by the driver: ntoskrnl.exe
    Caused by the address: ntoskrnl.exe + 75bc0
    File description: NT kernel & system
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
    CPU: x 64
    Plant address: ntoskrnl.exe + 75bc0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\080414-142319-01.dmp
    Number of processors: 6
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 286 544
    Dump of file time: 04/08/2014-21:25:25
    ==================================================

    Thank you!

    IRQL_NOT_LESS_OR_EQUAL (a)

    This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    Bugcheck A, {88, 2, 1, fffff80003662666}

    0: kd > k
    Call child-SP RetAddr site
    fffff800'00b9c038 fffff800'03681169 nt! KeBugCheckEx
    fffff800 '00b9c040 fffff800' 0367fde0 nt! KiBugCheckDispatch + 0 x 69
    fffff800'00b9c180 fffff800'03662666 nt! KiPageFault + 0 x 260
    fffff800 '00b9c310 fffff800' 03685df3 nt! KeInsertQueueApc + 0x42
    fffff800 '00b9c370 fffff880' 04a96f16 nt! IopfCompleteRequest + 0xb63
    fffff800 '00b9c460 fffff880' 04a64fb7 usbhub! UsbhPdoInternalDeviceControl + 0x4fe
    fffff800 '00b9c4b0 fffff880' 014da2b0 usbhub! UsbhGenDispatch + 0 x 57
    fffff800 '00b9c4e0 00000000' 001eed06 ffusb2audio + 0x52b0
    fffff800 '00b9c4e8 fffff880' 016884ba 0x1eed06
    fffff800 '00b9c4f0 fffff800' 0368c85c tcpip! TcpPeriodicTimeoutHandler + 0 x 714
    fffff800 '00b9c570 fffff800' 0368c6f6 nt! KiProcessTimerDpcTable + 0x6c
    fffff800 '00b9c5e0 fffff800' 0368c5de nt! KiProcessExpiredTimerList + 0xc6
    fffff800 '00b9cc30 fffff800' 0368c3c7 nt! KiTimerExpiration + 0x1be
    fffff800 '00b9ccd0 fffff800' 036798ca nt! KiRetireDpcList + 0 x 277
    fffff800'00b9cd80 00000000 00000000' nt! KiIdleLoop + 0x5a

    ffusb2audio.sys (driver of USB 2.0 audio Focusrite) refers to an invalid memory (0000000000000088).

    0: kd > lmvm ffusb2audio
    start end module name
    "fffff880 ' 014 d 5000 fffff880 ' 014e7000 ffusb2audio T (no symbol)
    Loaded symbol image file: ffusb2audio.sys
    Image path: ffusb2audio.sys
    Image name: ffusb2audio.sys
    Timestamp: Wed Oct 13 11:40:18 2011

    Very old driver, I recommend just completely uninstall the software and remove the device (if any).

    Kind regards

    Patrick

  • SD on Tecra 9000 card driver installation

    Hi I have the latest drivers for the sd card reader but can't install them.
    I, follow the instructions "read me" but get caught in the basic system of double click folder, that there is no basis in Device Manager system folder, just the system one folder when I double just click it opens a large list of articles that don't present any resemble the sd card reader can someone please help me with a guide of the fool proof on how to install the drivers for the sd.
    Kind regards

    Mike

    Hi Mike

    And now what is the problem? Have you done as he describes?

    As you can see at first, you must install driver of SD host control. After that, you must place the SD card into the SD card slot. Only in this case, the SD card driver can be installed.

  • Satellite P200 accidents + message: graphic card driver does not work properly

    Hello

    hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

    When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

    It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

    I ran a system restore but the problem remains.

    I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

    Matt

    Hello

    Sounds like the GPU problem.
    But try the graphics card driver update.
    Use the most recent driver for your graphics card.

    In addition, clean the fans of portable computers.
    Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
    Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

    If this is not enough, then a problem of graphics chip would be possible.

  • I don't know what wireless network card driver to install for Satellite A200

    Hello

    Im trying to install the adapter wireless by Satellite A200 (PSAE0E) and can not make it work.
    The website offers different drivers and says that I have to click on "How to identify my wireless network card driver", but that the document does not exist.

    Can anyone help?

    Thank you

    According to the specifications of the laptop your Satellite has Atheros AR5006EX wireless network adapter.
    Download from http://aps2.toshiba-tro.de/wlan/

    Just choose the right operating system.

  • Cannot install VISTA on Satellite A100 graphics card driver

    Hi all

    I need help.
    I just installed Windows Vista Ultimate on my Satellite A100-326, (series PSAA9). This system has a graphics card from NVIDIA® GeForce Go 7300 with 256 MB dedicated memory that has worked very well on Windows XP MCE!
    The default graphics card driver does not work, so I downloaded the new driver for VISTA from Toshiba.
    Don't just install! I always get the following message: "the NVIDIA installer didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »
    We know what the problem might be?
    Did someone encountered the same situation?

    It's really frustrating...

    Thank you
    Jota

    Hi Jota

    Please check the different view on the same driver problem.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20479

    Try to download the driver again and see your results. Thanks ;)

  • Satellite P30-145: video card driver

    Hi, I have problems to run a particular game on my laptop and support for the game staff have watched my information system and said that I need to update my video card driver, but I have no idea where to start.

    Can someone help me get this sort?

    Thanks in advance.
    xxxxxxxxxxxxxxxxxx

    Toshiba graphics drivers are not similar with the original graphic drivers from manufacturers.
    Original graphics drivers are designed for the use of desktop not laptop. Laptop graphics driver supports protection against overheating and control the performance of the graphics chip. If the temperature rises the driver decreases the performance of the graphics card.
    It is very important because mobile phones have no own graphics card cooling module.

    If you will not find a more recent version of the graphics driver Toshiba or the game will not be able to execute on the graphics driver installed, then you can try the other drivers such as Omega drivers. But note; You can use it at your own risk.

  • Satellite A500-1GL: 2 questions: the fan speed & graphic card driver failures

    Hello

    I have 2 questions, hopefully someone can help me with that.

    * The first question - quick fan *.

    I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.

    I'm looking for some advise here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

    Can anyone help, should I be worried?

    * Second question - graphics driver *.

    Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

    I really hope that someone can offer more help that Toshiba has done, as I am a bit unhappy to be problems on a 2 month old laptop.

    Thank you for reading and I look forward to any Advisor.

    (> I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
    > I'm looking for some advice here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

    The cooling fan is controlled by the fan table in the BIOS. Fan table contains information about the temperature and the fan speed that means the depands on some level temperature fan speed.
    Over all the possible game features as the CPU, GPU, produce heat and the heat dissipation is high
    Cooling modules would begin to turn faster if the temperature level would be exceeded
    This is nothing exceptional everything at stake

    > Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

    I read on a similar question, and apparently, the graphics card DRIVER crashed during games
    Maybe it's a compatibility problem between game and pilot
    In most cases the graphics card driver update should fix this and I read on some forums that it has helped in many cases

  • Re: Qosmio F10 - impossible to reinstall the sound card driver

    Hello

    Recently, I uninstalled a program and my sound card driver has been uninstalled with it

    I'm running the Qosmio F10 with Windows XP.

    I have the file to reinstall the diver in the Toshiba page but when I try to install I get the error "driver is not found.

    Can someone help me?

    Thanks in advance

    The European Toshiba driver page provides audio driver for XP and at this time, it s a 5.12.0.1.5160 version of Analog Devices Inc.

    You must download, unpack and then run the installation exe.

    If it doesn't work then remove the sound card in Device Manager, reboot the laptop and check again.

  • Hardware acceleration is not enabled on my video card driver when playing Freecell

    Original title: "Hardware Acceleration"

    Ladies and gentlemen,

    I just clean installed Win 7 to replace Vista on my laptop Dell Inspiron 1720 (bought in 2008), and it went smoothly.

    However, when I tried the game "Freecell", I got the message that hardware acceleration is not enabled on my video card driver.

    How to achieve this please?

    (Device Manager displays the graphics card to be a standard VGA graphics card and the driver is supposed to be later)

    With thanks a lot

    Singletsigma

    Hello

    As the indicated error hardware acceleration must be supported by the video card
    and the drivers used. Check with Dell for the updated drivers, as well as the manufacturer of the device for
    the video device for the even more recent drivers. Do not assume because the Device Manager displays the
    present drivers as later that they are really - see how to upgrade the drivers below.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    ========================

    IF your graphics (video device) and driver both allow hardware acceleration.

    1. choose Start > Control Panel.
    2. double-click on customization, and then select display settings.
    3. click on advanced settings.
    4. click on change settings on the Troubleshooting tab.
    5. move the cursor to Enable hardware acceleration
    6. click on apply and then click OK to accept the new setting and close the dialog box.
    7. click OK to close the display properties dialog box.
    8 restart Windows.

    ========================

    References to Vista also apply to Windows 7.

    It's my generic how updates of appropriate driver: (updated video driver manually.)

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to for many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error: "Hardware accelerator is disabled or not supported by your video make sure card driver you that you have the latest video card driver installed and the accelerator is running.

    Original title: Solitaire stop working right after the update to download

    This slowed the game.  I checked the video card is correct, and hardware accelerator says it's working properly.  This started after I downloaded two optional updates, one of them KB968930.  I uninstalled both of them and tried to restore the system with no result. the rest of the message is "Hardware accelerator is disabled rooms or not supported by your video make sure card driver that you install the latest video card driver and the accelerator is turned on."  I checked these things.

    Thanks for the help.  I had fixed to date through the tool and the info of the performance.  Find where it says new hardware installed, click on repair, I did and it worked.  I don't know what caused the problem, but my game index had fallen to 1 and came back up to 3.3.  Thanks for the help. P. W. O'Malley

  • my windows xp computer has a bad video card driver. How to upgrade the video card driver?

    I recently bought the game Minecraft for my pc. After paying for it, download and install, I wasn't able to play because he said I have a bad (accelerated openGL mode) video card driver and update the video card driver usually solves the problem.  I have a HP compq presario sr1000

    computer desk top of the page.  do you need to buy updates driver or are they free?   Thank you * address email is removed from the privacy *.

    Hi jettadaze,

    Welcome to the Microsoft Community and thanks for posting the question!

    It appears from the description of the problem, you want to update the driver for video card for HP Compaq Presario sr1000 desktop computer.

    You can download and install the latest drivers for the computer in the computer manufacturer site for free.

    You can download the drivers from the following link.

    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=402657&TaskID=135

    I hope that helps! In case you have questions about the Windows operating system, please post on the Forum of the Microsoft community.

  • To support video card driver spot him required Open GL. I can dom to fix? I have windows xp. Thanks in advance

    To support video card driver spot him required Open GL. I can dom to fix? I have windows xp. Thanks in advance.

    Hello


    Thanks for asking! If I understand, you need a video card for support driver reacquire it required Open GL. I suggest you follow the troubleshooting steps to check if this may help.

    What is the brand and model of graphics card?

    All graphics cards support OpenGL. However, not all cards are supported the same version of OpenGL. Some older cards have drivers only to provide support for some features of OpenGL.
    OpenGL is already provided with the common drivers for graphics cards. The standard will not be managed, however, on some older graphics cards.


    You can check the manufacturer's Web site.

    Just reply with the results. I'd be happy to help you more

  • Video card driver update

    Where can I get an update for my video card driver?

    My Roxio software gives me problems when burning to a DVD. I get a message that says that I need to improve my video card driver, and once I had a sent error blue screen auto reboot my machine.

    I went to my device manager and tried to upgrade from there, but he says that the computer cannot find any update for my driver.

    My computer is a gateway. I called gateway but because I don't have a warranty, they buy talk to me unless I have buy a service contract for one or two years

    I looked up ATI technology, but I can't find my driver there, and I don't know which driver I need to upgrade to.

    The ATI RADEON Xpress 200 Series driver is

    My computer was purchased in May 2006. It is an Intel Celeron d, DX 110 s, Wallpapers

    I use Windows XP/SP3, IE 7, AVG 2011, My Roxio Creator 2010.

    Any suggestions will be appreciated.

    Hi all
    Given the age of the thread and avoid any confusion, if the steps of troubleshooting in this thread has not solved your problem, I recommend you to create a new thread so that the community can focus on this thread. Consult the following link before asking your question so that you can provide all the relevant information for us to help you:

    http://support.Microsoft.com/kb/555375

  • Aspire the E1 graphics card driver update - 470p.

    I have an intel graphics hd 400 card and I tried to update its driver via the website of intel.

    But I got an error message that says that they could not help me with the update, because I had a custom graphics driver and I need to contact my manufacturer.

    So here I am, in the hope someone could help me in this whole process.

    Your computer has a custom driver because it comes with the OEM version of windows.

    If your computer is windows 8 recommended for your display card driver intel is

    VGAIntelDriver VGA9.17.10.3223136,4 MB19/08/2013Download

    Updates are released only when he reported for this driver.

Maybe you are looking for

  • Re: Need drivers for Satellite 1900 101

    Need drivers for Satellite s1900-101.

  • System Restore stopped restoring

    System Restore stopped restore date, trying even to an earlier date of restoration... Require a recovery procedure or repair

  • support for Windows Server 2012

    Is it supported?  Can someone tell me the documents concerning management of Windows Server 2012?  Thank you

  • Adobe flash player 10.3 conflict?

    Hello, I had a problem with adobe flash player since I update since version 10.1 to 10.3. She comes into conflict with my OS a lot and it freezes when I watch videos, I can't click anything, because the screen is frozen. So maybe if I upgrade to the

  • Windows 8 pw reset

    I have a computer of windows 8, I'm blocked.  My direct pw windows is reset and I hope that I can get the computer connected to a network to update the pw reset.  Is there a way to do this? This is a new laptop, I set up and immediately took on the t