Help, videos play more after the publication

Similar Questions

• After the publication of video in Movie Maker, it has a large green block down and extends the video

  I used a video camera to make a video and down it loaded on my computer.  Director of Windows wouldn't let me not download it from there, I guess that he could not read, so I converted it on AVS video converter 7.1 for mp4, which was unreadable on windows movie maker.  I then converted it to an avi and easily, he was transferred.  My problem is now, after the publication of the final draft of the film, he shows a huge green block at the bottom of the video and stretches horizontally on video.  This is not displayed when you edit the movie in windows movie maker, please help.

  Hello

  Since you used the 3 part video conversion software, we have no way of knowing what has occurred with the video. The only thing we can suggest is to follow the instructions in the following articles using the original video recorded and imported into Movie Maker:

  http://Windows.Microsoft.com/en-us/Windows7/make-a-movie-in-four-simple-steps

  http://support.Microsoft.com/kb/930435

• Play videos local one after the other

  Hi - I'm going to put in place 10 videos locally in Dreamweaver to play one after the other.  By local authorities, I say everything is on one computer and you just open the page HTML in Chrome and it works.  When the HTML opens in Chrome, I got the first video auto play and loops too.  But after the end of the #1 video, I have need for 2nd video to start, then third, and so on until the 10th is complete, then it goes back to #1 again.

  Is the code that I have on the local HTML page and it works for a video is:

  < video width = "720" height = "406" AutoPlay controls loop >

  < src = "source 1E.mp4" type = "video/mp4" > "

  < object data = "1E.mp4" width = "720" height = "406" > "

  < / object >

  < / video >

  .. .but I just can't figure out how to get the other 9 videos in there, so they play behind #1 loop and then back to #1 again.

  Does anyone have an idea how to do this?  Thank you.

  Video HTML5 can only play a single video.  It does not fit your goals.  That's why I suggested using your laptop Media Player by default since this will be the software that plays files.  If you do not have Windows Media Player to work, try something else like Media Player Classic (it's free, I use it all the time).

  Media Player Classic - Home Cinema Tutorial #3 - How to manage your playlists

  Nancy O.

• Fonts Typekit works is not after the publication of leading edge project

  Hi, I added the myriad of Typekit project edge lead and after the application of the police, that it looks great and even when I 'see in the browser' it works fine.

  My problem is after the publication, the default font its additional substitution (Serif-Sans) fonts in all browsers.

  Am I missing a step in the publishing process?

  Hi Nathan,

  Sorry for the delay to return to you; I see your response Friday. Done cover license fonts Typekit using web fonts in banners that will be placed on the websites of third parties, but the domain name should be listed on your kit you found. When the Typekit JavaScript runs in the browser, it checks the referer browser against the field on the kit. If the domain name in the referer matches your kit, the font files are not loaded.

  If you know the domain name of the place or places by using the banner, you can include them in the package and fonts on Typekit will work as usual.

  If the banner can be used on a variety of unfamiliar names, however, the best option is to serve in an iframe with an attribute known CBC and include the URL of the source on your fonts kit. Iframe referer matches the URL of the CBC, not the parent page, and the fonts will load in the iframe.

  I hope this helps; Let me know if you have any other questions. Best,

  -liz

• It shows the white border around the document after the publication

  

  I am facing some problems with the edition of the flash file. After the publication in HTMl; It shows the white border to all parts of the document.

  The size of my document is width:-1280 height: 650. He adds border border all the sides up and down are greater than left and right.

  I tried several ways, changed my setting of the flash as well but no use. I'm really confused because of this.

  To my surprise to the SWF file show perfect match and fit exactly window (showing no boundaries like HTML)

  I don't know exactly where it's getting white borders.

  
  Here's my setting to publish

  
  Flash: -.

  -------------------------------------------------------------

  Version: Flash Player 9

  Load order: bottom to top

  The ActionScript Version: ActionScript 2.0

  
  HTML: -.

  ------------------------------------------------------------

  Model: Flash only

  Size: Game Movie

  Quality:-top

  Window mode: window

  Alignment of HTML: default

  Scale: Exact adjustment

  Alignment: horizontal:-left, vertical: Top

  
  Any help would be greatly appreciated

  I told you to add this code, is not that you have it already.

• Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  Bridge does not recognize my camera more after the installation of El Capitan.  PLEASE FIX THIS!  I can't do my job!

  If your Adobe program worked before installed El Capitan and does not work after you have installed El Capitan... How is problem from Adobe?

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

• Files referenced is not showing is not on another PC after the publication

  Hi all, I have questions get referenced files and folders in my project after the publication of the draft in an .exe file. I inserted the buttons that success, are to open the files within my slides but after compilation and move the exe files and code files in the same folder on a different pc buttons do not open files outside of the computer on which it was initially published. Pls what can I do?

  Hello

  The way simplest to specify a relative path must avoid any navigation you can to find any file that you are linking and simply type the file name in the dialog box. Once you have done this, you just check that the file is present alongside the Captivate movie so that during playback, it can find the file.

  I think that most people do a corresponding error when they use the dialog box to find and select the file they establish between. When you do this, Captivate conscientiously inserts the path to the file on your own hard drive. This means that the file will be stored the the exact location using the same drive letter on PC the end-user for things to work in the end.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Maintain the links after the publication

  Hi all
  
  In my current project, users are offered the opportunity to open some PDF versions of some samples on the screen by using the button 'open the file or url '. I moved the samples into a folder on a CD and adjusted the link button accordingly. However, after the publication of the project on the SAME CD, the links no longer work.
  
  Can anyone offer some advice?
  
  Thank you
  
  AM

  Hi AM

  What happens exactly? Did you hear only a click, then nothing? Do you see a web browser? What?

  See you soon... Rick

• aftermath video does not start after the publication of flash catalyst project

  I created a Web site in flash catalyst. I used a video I made after affects only the intro of the site. When I run the project in flash catalyst everything works fine, but when I publish it for deployment on the web and run the .swf file, nothing happens. Anyone know what can be the problem?

  Hi Kirill.

  You do not see the video because Your ' e running the .swf generated to deploy to the web folder. You must deploy to the web to download the content of the files to your web server and it will work fine. (same thing happened to me once)

  You can see the video of intro of your machine by clicking in the .swf in the Local run folder.

  Its happens because the video you created is not embedded into the main.swf.

  See you soon.

• Streaming video of problem after the update of the lollipop

  While playing a video in YouTube and Facebook, I get an error. All the world experienced? This is all after update 5.0.2. I also did a factory reset after the update but I still have the error. Peut some o

  don't help me?

  

  

  This also occurs if try you it in safe mode?

• Engravers Blu - ray Samsung SE - 506 Monte is more after the upgrade of the El Capitan

  Hi all

  MBP, in early 2008, El Capitan 10.11.2...

  My Samsung Portable Blu - ray writer, SE-506CB/RSBD Monte is more after I upgraded to El Capitan, last week.  The drive itself is only a few months old.

  The problem is not the USB ports, like other devices work fine with all the USB ports on my MBP.

  Note that I'm NOT trying to read or write a Blu - ray disc.  I try only to play audio CDs, I've done successfully before the upgrade to El Capitan.

  Someone had this problem?

  Thank you...

  For what it's worth, I have this problem as well.  The drive tray would not eject even with a single cable, so I switched to another.  I could then open the drawer (seems odd for me) but the disc would not rise.  Here's the info from the console log that indicates that the operating system is getting bad feedback from the pilot saying that the disk is defective.  This same drive/cable/disc work very well on my MacBook Air 10.10.5 and had worked perfectly well with this MBP even before the service (and "free" upgrade to EC by Apple).

  Console

  09/01/16 12:34:49.000 kernel [0]: AppleUSB20HubPort@fa130000 011849.735343: AppleUSBHostPort::resetGated: a new attempt to list 100 MS

  09/01/16 12:34:50.000 kernel [0]: AppleUSB20HubPort@fa130000 011850.924723: AppleUSBHostPort::resetGated: a new attempt to enumeration in 200ms

  09/01/16 12:34:51.000 kernel [0]: AppleUSB20HubPort@fa130000 011852.236095: AppleUSBHostPort::resetGated: a new attempt to enumeration in 400 ms

  09/01/16 12:34:52.000 kernel [0]: USBMSC (non-unique) identifier: (Korean characters removed) 0xe8d 1956 0 x 0 x 0, 2

  09/01/16 12:35:10.000 kernel [0]: disk3: alignment error.

  09/01/16 mds 12:35:12.432 [74]: (Volume.Normal:2464) volume: 0x7ffc330a4c00 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/ENTOURAGE

  09/01/16 mds 12:35:12.456 [74]: vsd:0x7ffc33173400 (Volume.Error:577) open failed.  failureCount:0 (null)

  09/01/16 12:35:23.000 kernel [0]: smb_smb_ssnsetup: GROUND does not support extended security, this server will be deprecated in the future!

  09/01/16 mds 12:35:27.471 [74]: context of recycling: 0 (Volume.Normal:166) vsd:0x7ffc33173400 DisabledStore: {}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:27.502 [74]: vsd:0x7ffc338c6000 (Volume.Error:577) open failed.  {failureCount:1}

  DisabledRecycleCount = 1;

  }

  09/01/16 mds 12:35:57.502 [74]: (Volume.Normal:166) vsd:0x7ffc338c6000 DisabledStore recycling: 2 context: {}

  DisabledRecycleCount = 2;

  }

  09/01/16 mds 12:35:57.540 [74]: vsd:0x7ffc308c8400 (Volume.Error:577) open failed.  {failureCount:2}

  DisabledRecycleCount = 2;

  }

  The drive works perfectly well with this disc in 10.10.

• HP Photosmart B110: B110 does print wireless more after the passage of internet service provider

  Hello

  I have a photosmart b110 and always used printer wireless with no problems.

  I use a laptop HP G62, windows 7 Home premium and as I said, never had any problems with my printer before (and goes through all the printing test pages, is anything wrong with that).

  A week ago I changed my (internet) providers, and since there are problems:

  But on the HP Networkconfigurationpage prints, the printer gives all the correct information (networkname etc.), it does not react to print from the laptop orders more.

  Well, it does work once after the problem started and well after that I have installed on the pc (using "add new printer")

  However, the next day, after having restarted the laptop, the connection was working no more.

  So far, I called the service provider 3 times (in order to get different people) and heard 'Sorry, no idea' twice and "If you don't have internet, it must be the fault of the printer.

  Can someone please give me an idea about where to look?

  The last provider had a cable connection, this one is by telephone line, could that be a reason? And if so, why? And how can I solve this problem?

  So, I hope that someone can offer some suggestion help! :-)

  Reset the printer to the network settings.   Then...

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  However, if you have a gateway device, all devices in gateway (modem + router) are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• The videos are missing after the importation of the iphone

  Help!

  The videos that are on my iphone are missing from my iphone AND in window photo gallery. I want to cry, there was more than two years of special moments!

  Hi AnnMor,

  You did changes to the computer before this problem?

  You can search for video files by typing the name of the file, or from its tags, file type.

  For more information, refer to this link: find a file or folder

  For the issue of the iPhone, I suggest you to contact Apple support to see if they can recover the data from the iPhone.

  Hope the helps of information.
  Please post back and we do know.

• CalendarAgent close unexpectedly and more after the upgrade to 10.11.5

  After the upgrade to 10.11.5, I get popup after popup stating "CalendarAgent quit unexpectedly" (forgive the change of fonts copy paste)

  He's going to stay here until I have click and then within 10 seconds, it will return. After reboot, after forcing reboots, nothing I've tried so far solves the problem.

  Anyone else having this problem?

  joelb

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• A Web site cannot be displayed more after the upgrade to version 14.01

  I use www.kpnvandaag.nl as a homepage. After the upgrade to version 14.01 this site and only this site will show no more. When go to this page, an error is displayed that says, translated freely: there is an error.
  This page cannot be displayed.

  What is a Web site or Firefox (or other causes) error?

  You may also need to check the settings I n your security software (Norton) to ensure that nothing is blocked.