Help wanted with the footer coding.

Similar Questions

• HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?

  The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path.  These pixels are rasterized and based and cannot be resized without loss of quality.  You have options.  If you want to enlarge the raster layer, transform the work path and stroking again.  Or work at a resolution higher, in the first place.

  Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.

  

• Hello! Can someone help me with the address of repair service for Palm TX?

  Hello! Can someone help me with the address of repair service for Palm TX?

  Good luck and please, let us know here how it works for you.  We like to know current resources, which can help to solve the problems of people with these older devices.

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• can someone help me with the link to download hp2050 print drivers that are compatible with windows 8.

  can someone help me with the link to download hp2050 print drivers that are compatible with windows 8, my software CD is not compatible with windows 8, and I can't use the printer now.

  Hello

  The installation program "Full Feature" can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109407-2&cc=us&DLC=en&LC=en&OS=4132&product=4027469&sw_lang=

  Kind regards

  DP - K

• Clouds (can someone help me with the error code 214?)

  can someone help me with the error code 214?

  Hello

  Reference:--

  Error code 214

  Error in downloading, installing or updating Adobe Creative Cloud applications

• help reqd with the cmdlet "get-customattribute.

  Hey all

  Can someone help me with the cmdlet above pls?

  What I'm trying to do, it is all simply do a search in our VC against some "custom attributes" and confirm the virtual machines associated with them.

  (i.e. custom attribute 'RED' has a servers VM called "SERVER1, SERVER2, etc.")

  I tried to find objects associated with this and all I get is the following objects:

  ServerId
  Server
  That is to say;
  Name
  TargetType
  UID
  Customer

  So, how can I use these to get something that again relates a servernames VM?

  As usual - thank you very much in advance for your help

  Munster99

  Of course, try it like that

  Get - VM | Get-Annotation - CustomAttribute "red" | Where {$_.} Value}

• As a gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version for the same product against the new upgra

  I have RECIVED YEAR EMAIL FROM ADOBE AS: as gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version of the product, even against the new order of upgrade"IS this UPGRADE FREE AND CE WHO SHOULD DO, HOW can I HAVE THIS UPGRADE?

  HOW I CAN PLACE THE ORDER AND IS IT FREE?

• Help please with header/footer includes

  Can someone please help with an easy to follow the answer?

  I'm building a site and want to use the header and footer as include files for easier maintenance of the links. In the header, navigation is graphics reversal. (I mention this because there is a problem with the paths of the image). I was able to get understands it appears and works, but my problem is that I want to use subfolders and here, I'm going along in circles. Graphical navigation is visible at the level of the root only.

  The structure of my site goes like this:

  Root has index.php and a few other pages, plus directories following, css, images, includes (containing my header.php and footer.php), subfolder1 (containing the index.php) and subfolder2 (containing index.php).

  The navigation works at the root level but not at the high school level. I tried to use the document and the location of links... / and / and / paths, but I cannot understand this.

  My navigation is WELCOME. SUBFOLDER1 | SUBFOLDER2. CONTACT | LINKS. Hope this is clear.

  If you want to PM me with your email and that you think it might help, I can send you one of my files and the file I use for inclusion so that you can see what works for me?

  Martin

• Someone help please with the eyre audit report?

  EtreCheck version: 2.9.10 (261)

  Report generated 2016-04-08 21:36:12

  Download EtreCheck from https://etrecheck.com

  Time 02:45

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro9, 2

  1 2.5 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 785

  Video information: ⓘ

  Graphics Intel HD 4000

  Color LCD 1280 x 800

  Software: ⓘ

  OS X Mavericks 10.9.5 (13F34) - since startup time: less than an hour

  Disc information: ⓘ

  HTS547550A9E384 disk HARD APPLE disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 499,25 (Go 460,16 free) - 36 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ - 8À8)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  ~/Library/Caches/com. Apple.Safari/extensions/Omnibar.safariextension

  ~/Library/Caches/com. Apple.Safari/extensions/Searchme-2.safariextension

  ~/Library/LaunchAgents/cinema-plus-1-1.ver

  ~/Library/LaunchAgents/cinema-plus-1-1_enabler.plist

  ~/Library/LaunchAgents/cinema-plus-1-1_updater.plist

  found 5 adware files. [Remove]

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] com.symantec.nfm.kext (6.4.1f36 - SDK 10.9-2016-03-30) [Support]

  / System/Library/Extensions

  [loading] com.symantec.internetSecurity.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]

  [loading] com.symantec.ips.kext (6.4f36 - SDK 10.8 - 2016-03-30) [Support]

  com.wibu.codemeter.CmUSBMassStorage [no charge] (1.0.7 - 2016-03-30) [Support]

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 142 tasks Apple

  [operation] 37 tasks Apple

  Launch system demons: ⓘ

  [failure] com.wibu.CodeMeter.Server.plist (2013-11-15) [Support]

  [loaded] 50 jobs Apple

  [loading] 140 tasks Apple

  [operation] 59 tasks Apple

  Launch officers: ⓘ

  [loading] com.symantec.errorreporter - periodicagent.NFM.plist (2015-09-28) [Support]

  [operation] com.symantec.uiagent.application.NFM.plist (2015-09-11) [Support]

  [loading] org.gpgtools.Libmacgpg.xpc.plist (2015-09-23) [Support]

  [loading] org.gpgtools.gpgmail.enable - bundles.plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid - user .plist (2015-03-08) [Support]

  [loading] org.gpgtools.gpgmail.updater.plist (2015-09-23) [Support]

  [loading] org.gpgtools.macgpg2.fix.plist (2015-03-08) [Support]

  [market] org.gpgtools.macgpg2.shutdown - gpg - agent.plist (2015-03-08) [Support]

  [loading] org.gpgtools.macgpg2.updater.plist (2015-03-08) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-03-07) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2016-04-08) [Support]

  [failure] com.symantec.SymLUHelper.NFM.plist (2015-09-11) [Support]

  [loading] com.symantec.UninstallerToolHelper.plist (2015-04-21) [Support]

  [operation] com.symantec.deepsight - extractor.NFM.plist (2014-09-10) [Support]

  [loading] com.symantec.errorreporter - periodic.NFM.plist (2015-09-28) [Support]

  [failure] com.symantec.liveupdate.daemon.NFM.plist (2015-09-11) [Support]

  [operation] com.symantec.sharedsettings.NFM.plist (2015-09-11) [Support]

  [operation] com.symantec.symdaemon.NFM.plist (2015-09-11) [Support]

  org.eyebeam.SelfControl.plist [no charge] (2014-12-26) [Support]

  [loading] org.gpgtools.gpgmail.patch - uuid.plist (2015-03-08) [Support]

  User launch officers: ⓘ

  [no charge] cinema-more-1 - 1.ver (2014-10-28) Adware! [Remove] 

  [failure] cinema-more-1 - 1_enabler.plist (2014-11-06) Adware! [Remove] 

  [loading] cinema-more-1 - 1_updater.plist (2014-11-06) Adware! [Remove] 

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist (2014-10-17) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  iTunesHelper UNKNOWN (missing value)

  uTorrent UNKNOWN (missing value)

  Genieo UNKNOWN (missing value)

  TuneupMyMac UNKNOWN (missing value)

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.70432

  [loading] 442 tasks Apple

  [operation] 284 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-10) [Support]

  QuickTime Plugin: 7.7.3 (2015-01-30)

  Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-10) obsolete! Update

  Default browser: 537 - SDK 10.9 (2015-01-30)

  Silverlight: 5.1.40728.0 - SDK 10.6 (2015-08-24), [Support]

  NortonInternetSecurityBF: 6.4 - SDK 10.9 (2015-09-28) [Support]

  JavaAppletPlugin: 14.9.0 - 10.7 (2014-09-07) check the version of the SDK

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

  Safari extensions: ⓘ

  Norton Security (2016-02-11)

  Searchme (cache only) (2015-11-08) Adware! [Remove] 

  Omnibar (cache only) (2015-02-23) Adware! [Remove] 

  AdBlock (2016-03-18)

  3rd party preference panes: ⓘ

  CodeMeter (2013-11-15) [Support]

  Flash Player (2016-03-07) [Support]

  GPGPreferences (2016-01-04) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% fontd

  3% kernel_task

  3% WindowServer

  0% com.apple.WebKit.WebContent

  0% aosnotifyd

  Top of page process of memory: ⓘ

  Kernel_task 483 MB

  315 MB SymDaemon

  PluginProcess 217 MB

  180 MB Safari

  Mds_stores 94 MB

  Virtual memory information: ⓘ

  1.04 Go free RAM

  2.96 used GB RAM (1.34 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  April 8, 2016, Self test - 21:17:24

  Hello Chocbar648,

  Your hard drive may be faulty.

  You do not have a backup.

  You have adware.

  You must:

  (1) buy an external hard drive and make a Time Machine backup

  (2) use EtreCheck to remove your adware and perform another backup.

  (3) get rid of the antivirus software which obviously does you no good.

  (4) operate your machine for a week or two. Then run another EtreCheck. If you have disk errors, then you should get your hard drive replaced. It is possible that your antivirus is causing these errors.

  (5) If you continue to encounter disk errors, download your hard drive replaced in an Apple Store or Service Center authorized Apple. I suggest a Service authorised Apple Centre and see if they update your RAM and give you an SSD too. You don't need really to do with the Mavericks, but if you want to go to Yosemite or El Capitan, you'll thank me. Given that you need to open the machine

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• Please help me with the video card and power supply issues!

  Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost

  Oh and in case you want some specs on my system here are a few

  Windows Vista Home premium service pack1
  HP Pavilion a6620f
  Processor: pentium dual core cpu e5200 @ 2.50 GHZ
  memory: 4.00 GB
  system type: 64-bit operating system
  Version of DirectX 10
  graphics card: intel GMA 3100 Total memory 256 MB

  Message edited by chefinomaha on 06/03/2009 16:38

  Hi chefinomaha,

  Sorry to hear about your frustration. Here's some good news.

  I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.

  The important thing is to get the right kind of diet that fits your connectors.

  Here's your motherboard page.

  Here is a document with step-by-step instructions and video for adding a video card.

  Here is a document with the video to replace the power supply.

• can someone help me with the importation of the pictures that are on my computer?

  I'm new to Lightroom.  I try to organize all my photos in one place on my computer.  For now, they are in several different areas on my computer (drive C, which I assume is my hard drive), I've used the memory manager (creative Memories) that I have lovers but they are now almost so I need to get all these pictures I had stored there in Lightroom.   I exported all these photos on a file on my computer. How can I manage the import of all these photos in Lightroom?  I'm confused by the copy as DNG, copy, move, and add options?  Can someone explain?  As I said, I don't want all the photos in one place, Lightroom and not in different places. Also, I want to make sure that the photos are safe when they are in Lightroom, so I guess I do a return upwards on an external hard drive as well? Thanks for the explanations and tips.

  Any advice on the management of other files that don't import not duplicates?  Thank you!

  Hi Reneehaf,

  Please follow the links for instruction step by step below.

  Adobe Photoshop Lightroom Help | Import photos from a folder on a hard disk

  Adobe Photoshop Lightroom Help | Import photos from a camera or card reader

  Video link: Lightroom 5 - import your Images | To get started with Adobe Photoshop Lightroom 5 | Adobe TV

  It will be useful.

  Kind regards

  ~ Mohit

• !!! Help! with the addition of auto webfonts hosted

  I used hosted web fonts self with Muse and they work great. But recently I have big problems with this one I bought new (very expensive) police for a new site, that I am trying. I went through all the appropriate measures to add police, Muse/Typekit approve the police so much that it is ready to use, I type using the new font in Muse and he appears beautifully, publish my site and police back to some horrific research which is NOT EVEN close to the self hosted police, I Muse. Please someone tell me what I'm doing wrong because I did everything what I know how to do and this new police was CRAZY expensive fricken and I don't want to give up on it! Please see attached link and images.

  Home

  

  

  

  

  

  Hey rogert97512532!

  I discovered that my WOFF file was corrupt society I bought my policy through. Corruption comes from the data in the WOFF file then muse he will see in valid WOFF format but the internet and browsers are not. So we will be able to see what works well in the pages of real muse generator, but once it goes live, browsers can figure out what to do with the corrupted file, then they we default back to Georgia instead. If you send the company that you have obtained your policy of they will usually give you another copy of the WOFF who is not corrupt. For future assistance with this, you can use this link ( WOFF Validator ) to check your WOFF files. I hope this helps! Feel free to me message if you have any other questions!

  -Adam Pavis

• [HELP] Problem with the restoration and recovery in the new host

  Hi, guys!
  
  I have tried for two days, but still can't make it work.
  I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.
  
  The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.
  
  Could someone help me out here? Any advice would be appreciated!
  
  -----
  RMAN > restore the database up to the wire of the sequence 10 1;
  
  From restoration to November 8, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
  restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
  restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
  restoring datafile 00005 to D:\ORA_DATADATA01. DBF
  restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
  restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
  restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
  P
  
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  -----
  
  Here is some additional information you might want to know about:
  
  -----
  RMAN > list incarnation;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
  2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
  3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
  4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
  5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
  6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11
  
  RMAN > backup recoverable list;
  
  
  List of backup sets
  ===================
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  37 full 822,34 M DISK 00:29:47 7 November 11
  BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
  List of files to backup data value 37
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
  2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
  3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
  4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
  5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
  full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
  7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
  8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  38 full 6.95 M DISK 00:00:03 7 November 11
  BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
  Control file included: cash SNA: 2151141 cash time: 7 November 11
  SPFILE included: Modification Date: 7 November 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  18,46 39 M DISK 00:00:05 8 NOVEMBER 11
  BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP
  
  List of newspapers archived on backup value 39
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
  1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
  1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
  1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
  1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
  1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
  1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
  1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
  1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
  1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40 full 6.95 M DISK 00:00:00 November 8, 11
  BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
  Control file included: cash SNA: 2223097 cash time: November 8, 11
  SPFILE included: Modification Date: 8 November 11
  -----
  
  Thanks in advance!
  
  Jay

  In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

  Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

  Hemant K Collette