Help! Why the value is not changed?

Similar Questions

• Why the police does not change in itself?

  I use a Mac, and continue to change my fonts. Today, they are italicized in the browser and my gmail.

  It does not change everytime I open, and sometimes it changes while it has already been opened for awhile... I know weird.

  The fonts changed to arial, I hope it will work.

  THX

• Why the gradient does not change when I copy and paste from one document to another?

  Here is a screenshot of the objects I want to copy to a new document.

  

  As you can see in the following picture, the gradient changes considerably between the two documents.

  

  All parameters in the gradient panel are the same, so I have to assume there is a document setting that differs between the two.

  Also, I tried to change the mode in the CMYK to RGB color Panel, and it was locked to CMYK.

  Any help would be appreciated!

  Thank you

  Robbie

  Sounds like the two documents is defined on (a RGB and a CMYK) color modes. The title bar should indicate the color mode you are using.

• Why the codes would not change after I saved and my site shows different display than dreamweaver?

  I changed the banner images. It was modified in dreamweaver, but browsers of the source of the page shows the old image. I save after I edited the new codes. Thank you

  You have downloaded the new images on the server?

• Flag value does not change after the SCD TYPE1 column update

  Hello

  I had scd type3, type2 successfully.

  I'm trying to implement the type 1 scd.

  For this, I change slow dimension & ckm oracle the oracle select ikm.

  the source and target tables are the following. for the type 1 scd, I chose scd behavior as existing lines updated on behalf of the emp, sal columns.

  Start timestamp to join date and the current flag to flag column.

  first ename is smith when empno is 7369.

  I've updated ename

  Update scdtype1_source set ENAME = 'AA' where EMPNO = 7369

  After running, I don't have to change the flag o to 1 in the target table.

  SCD type1 mainly used for replaces old values., but I add flag column in the target table for easy identification. () column in which I updated)

  I have not any change in the flag.

  Please help me,

  Thnaks in advance,

  A.Kavya

  

  Hello

  I'm not sure what you're trying to do will work. In the case of Type 1 SCD are you still using the dimension of change slow ikm oracle? The flag is updated to 0 in the case of CDs because of the code in step 2 "' Historize old rows where CPCs flag is set to '0'.» In your case, that no new record is added in the case of an update so the IKM does not change the flag.

  I'm not sure of your requirement either. You say you want to identify the column in which you have updated. How is an indicator will tell you what the column value has been changed? Maybe you want to know which line you have updated? If this is the case and lets say you set the flag to 1 in case of update what happens when another updated same record?

  I would suggest you add an updated time stamp column to your table and set of sysdate but in properties check only the update and will not insert. What that would do is update your record, it will fill the current date and time so that you can identify that this record has been updated.

  If you want to always go for the flag, then follow the same approach but in your mapping, change the value of the flag to 1 instead of 0 and new check only the update box (uncheck the box insert). In your create table statement the default value of this option to 0. So when the new line is inserted database is automatically assigned the flag to 0 and where there is an update, ODI it will change to 1.

  Thank you

  Ajay

• I can't tp perform actions on email or some Web sites because the pointer does not change from a helping hand on all orders at the top of a page - any more down works fine

  In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect.

  If I try to open the top message from the page by clicking on the command "Open" is gray.

  If I open the type of web page that has a number of menu items at the top of the page, I can't open anything either for the same reason - something more to the bottom of a page is fine. The type of Web site with menus on the sides can be used for all items except the top menu!

  Help!

  Concerning

  Brian

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• Why the thumbnails do not reflect the changes that I make to pages?

  I'm working on a pdf file in Acrobat DC.

  I'm working on a page with all the hidden layers.

  If the thumbnail is blank

  When I show a layer it appears on the page.

  However, the thumbnail does not change.

  Why the thumbnails do not reflect the changes that I make to pages?

  Hi Jules,.

  The behavior is the same in Acrobat 11 as well. The thumbnails do not get updated until you close the document and reopen it.

  Kind regards

  Rave

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Why the app is not available?

  Good day! A plan of creative cloud for photographers (one year prepaid) took place in 09.05.2016. The number of the last transaction: 12144240659.Delivery address: ALEKSANDR KOSACH. Why the app is not available? Please give answer to mail: [email protected]

  Forum questions are answered in the forum, not by email

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  Wow!

  So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
  • In the affirmative. launch creative cloud application and load the list of Apps and check.

• Why the titles are not saved with the project? Where are they?

  CS5 PC.

  Why the titles are not saved with the project? Where are they? I can save them with the project?

  You can also configure a project basis including all titles.  When it's time to start a new project, open the template and change the name before starting to work.  In this way all the foundations are in place without having to implement the project with these basics every time.

• Change the size of the resolution and the image does not change the result on the screen?

  
  I use Photoshop CS3. I'm changing the resolution of several images that will be printed in a newspaper. So the current images are 72 dpi and really huge - for example 36 x 27 inches (size of the document), and when I change it to 300 dpi, the size of the image to reduce to about 8 x 6 inches, as I hope. But the image I see on the screen does not change. Thus, for example, when I open the image originally, it's 33% and the entire image is visible. After I change the resolution and the size of the image has changed accordingly, the image appears to be always the same and it remains at 33%. The image should not shrink on the screen because its size has been reduced? Or if she stays the same on the screen, the percentage should not change? I mean if the size of the document is now 8 x 6, it should be able to display at 100% and not to fill my whole screen... I'm so confused. Thank you...

  Gradded,

  The "Size of the Document" of the dialog box size of the Image is just to specify the size (in inches) that your document will be printed. The ppi adjustment has nothing to do with what is displayed on your monitor. Your monitor does not care something about PPI. The monitor contains a number of pixels and after you change this setting, ppp, the monitor will always be the same number of pixels.

  As long as you leave the box "Resampling" disabled, will not change the size of your image (pixel Dimensions). You won't see any change on your monitor. If you check "Resample", then the size (in pixels) of your image will change.

  I hope this helps.

• Why the database do not recognize the statement_id that already defined?

  Why the database do not recognize the statement_id that already defined?
  

  SQL> explain plan SET STATEMENT_ID='HR' for select*from employees where salary>10000;
  
  Explained.
  
  SQL> select*from table(dbms_xplan.display) where statement_id='HR';
  select*from table(dbms_xplan.display) where statement_id='HR'
                                              *
  ERROR at line 1:
  ORA-00904: "STATEMENT_ID": invalid identifier

  Set it as parameter to the function.

  conn hr
  password:
  
  SQL> explain plan SET STATEMENT_ID='HR' for select*from employees where salary>10000;
  
  Explained.
  
  SQL> select*from table(dbms_xplan.display(statement_id => 'HR'));
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------
  Plan hash value: 1445457117
  
  -----------------------------------------------------------------------
  | Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Ti
  -----------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |           |    68 |  4624 |     3   (0)| 00
  |*  1 |  TABLE ACCESS FULL| EMPLOYEES |    68 |  4624 |     3   (0)| 00
  -----------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------
  
     1 - filter("SALARY">10000)
  
  13 rows selected.
  

  Published by: jetq on May 1st, 2010 13:30

• Why the iPad is not compatible with Amazon Pro premium?

  DDoes anyone know why the Pro is not compatible with Amazon prime? I can get the first one on my iPad two old as well as my partners air2.

  Strange, isn't it?