Why the codes would not change after I saved and my site shows different display than dreamweaver?

Similar Questions

• Why the gradient does not change when I copy and paste from one document to another?

  Here is a screenshot of the objects I want to copy to a new document.

  

  As you can see in the following picture, the gradient changes considerably between the two documents.

  

  All parameters in the gradient panel are the same, so I have to assume there is a document setting that differs between the two.

  Also, I tried to change the mode in the CMYK to RGB color Panel, and it was locked to CMYK.

  Any help would be appreciated!

  Thank you

  Robbie

  Sounds like the two documents is defined on (a RGB and a CMYK) color modes. The title bar should indicate the color mode you are using.

• Why the police does not change in itself?

  I use a Mac, and continue to change my fonts. Today, they are italicized in the browser and my gmail.

  It does not change everytime I open, and sometimes it changes while it has already been opened for awhile... I know weird.

  The fonts changed to arial, I hope it will work.

  THX

• I am updating of content in an old site and uses an old extension to close a page of the child.  It worked fine until I started using CS6.  The code for this is in a model that I use and the code has not changed.

  So the site is www.fulcrumcwi.com and the URL of the page is: FulcrumCWI Rebecca Morgan operations strategy Consulting newsletters.

  If you choose the first HTML link for the news bulletin when you try to use the close buttons, none of them work.  Yet if you go down in the January issue and switch to the HTML version, it works very well.  This is the code that the extension highlights:

  < form >

  < input name = "Close" onclick = "self.close (); return false"type ="button"value ="Close"/ >

  < / make >

  I have not changed somehow.  The only change is I use Dreamweaver CS6 to make these changes.  Does anyone have a solution for me?

  As always, thanks in advance.  (and Yes, I know that this site needs a major update)

  GraphicEdge

  Looks like you're missing target = "_blank" in the link "HTML" to open in a new window that works properly...

• Capacity of the disc does not change after resizing

  Hi all

  I had developed the disc hard a virtual computer and, unfortunately, the capacity of the disk in the infrastructure client does not change for my VM.

  Is there a way to fix this? I want real numbers.

  Thank you very much for your help!

  Johnny

  Yes, SSH into the host and the order number.

• currency of the row has been changed after cancel create and return to the call of workflow

  JDev 11... 2
  I have two workflow set up very similar to the task of Steve Muench and you will receive. I have master / detail in two tables on a navigation page and a different workflow that create/change for the master and detail (separately). When I create a new master, everything works well except that when I cancel and return to the appellant task, I get the "currency line has changed since the user interface has been made." The cancel task-flow-return has end transcation = rollback and restore savepoint = true and Cancel button immediately a = true. Looks like the controller looking for the newly created folder that has been rolledback. Given that this seems to be a model common vey, what is the best way to not show the warning?
  
  Thanks a lot for the pointers.

  Hello

  the usecase of yours is the standard demo I show for the workflow and I never had this problem. One reason might be that you keep the scope of the task flow DC to share instead of isolated, in which case restoring impact on the flow of both. If you want to keep shared DC then check that you return to method activity that is re - running the battery for the parent workflow

  Frank

• HP ENVY 5640: claim for a previously owned HP ENVY 564 new code does not change after the disconnection from the WiFi?

  my printer used, I cannot set up an instant with HP ink account as the claim code is already associated with another account. After unplugging my hub and reboot / reconnect, a charge code showed on my touch screen but it says already with another account? Someone at - it suggestions?

  @itsatoucher

  See the following topics:

  Connected HP - Instant ink

  If necessary, call people cloud Support at the number indicated on the web page.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Why the product will not start after MacBook hard drive replaced? Avail Updater system wants to reinstall but impossible to access.

  Back up the hard drive to SeaGate.  Mac replaced due to lack of hard drive store.  Everything again restored hard drive.  Launch of Adobe products.  Error 1, product needs to be reinstalled.  Uninstalled Photoshop and Dreamweaver.  Tried to reinstall the update at the top of the screen icon.  Try to run, then disappears almost immediately at the dock bar.  Cannot access the programs.  Any ideas?

  Tell everyone you know who owns a Mac, including Apple employees... Migration of Mac and Time Machine NOT FUNCTION correctly with the Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

  - and 5 steps in response to #1 https://forums.adobe.com/thread/2144928

• Help! Why the value is not changed?

  ViewStack index = 0 (homepage), I pass the object of investments (index = 1) when I click on an item in the datagrid control.  The temporary name is set to that past from the home page.

  When I go back to the home page and click on another article on datagrid, I want the new value go to the courses page, but the first item data are still on the locations. How do I update it?

  
  

  I need the value (text)

  TextInput id = "txtName"on page placement page of changes which I attribute to the House.

  See below
  

  [Bindable] public var objPlacementMain:Object = new object;

  private function gotoPlacements(event:ListEvent): Sub {

  ce . objPlacementMain.name this=. dg.selectedItem.col1;
  ce . homePlacement.selectedIndex = 1;
  }

  
  

  < mx:ViewStack id=" homePlacement ">
  < mx:V
  

  < mx:DataGrid id=" dg "itemClick ="gotoPlacements (event)" >
  < mx:columns >
  

  < mx:DataGridColumn " headerText =" Column 1 "dataField =" " col1 " />

  < mx:DataGridColumn " headerText =" Column 2 "dataField =" " col2 " />

  < mx:DataGridColumn " headerText =" Column 3 "dataField =" " COL3 " />

  < / mx:columns >

  < / mx:DataGrid >
  

  < h:placements

  ' objPlacement = ' {}objPlacementMain} " " / > "

  
  

  < /> mx:ViewStack

  investments

  
  

  .......

  
  

  [Bindable] public var objPlacement:Object = new Object;

  ..........
  

  < mx:HBox

  " width = ' 100% "height =" " 30 " >

  < mx:Spacer " width = ' 48 "height = » 25 " />

  < mx:Label " text = ' Name "fontWeight =" " "BOLD" "width =" " 51 "" / > < mx:TextInput id = "txtName" text ="{this.objPlacement. }" " nom }"largeur = »193" editable = »faux"/ >

  < / mx:HBox >
  .......
  
  

  In your post, I am not in front of "public class"

  bindablePLacement ".  You should always get warnings of liaison.

• Why the network does not work after update to ios10?

  I can't make and receive calls. In addition, I can't send and receive messages.

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If this does not help, try here > If you can not connect to a cellular or cell - data Apple Support Network

• The website would not accept the sold code to the Coastal Carolina University Bookstore. Why not?

  The website would not accept the sold code to the Coastal Carolina University Bookstore. Why not? I paid 220.00. Adobe offers now 14 months to 200.00 on the web. I already paid and cannot validate my code. Why is this?

  Hi Dan,.

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• Flag value does not change after the SCD TYPE1 column update

  Hello

  I had scd type3, type2 successfully.

  I'm trying to implement the type 1 scd.

  For this, I change slow dimension & ckm oracle the oracle select ikm.

  the source and target tables are the following. for the type 1 scd, I chose scd behavior as existing lines updated on behalf of the emp, sal columns.

  Start timestamp to join date and the current flag to flag column.

  first ename is smith when empno is 7369.

  I've updated ename

  Update scdtype1_source set ENAME = 'AA' where EMPNO = 7369

  After running, I don't have to change the flag o to 1 in the target table.

  SCD type1 mainly used for replaces old values., but I add flag column in the target table for easy identification. () column in which I updated)

  I have not any change in the flag.

  Please help me,

  Thnaks in advance,

  A.Kavya

  

  Hello

  I'm not sure what you're trying to do will work. In the case of Type 1 SCD are you still using the dimension of change slow ikm oracle? The flag is updated to 0 in the case of CDs because of the code in step 2 "' Historize old rows where CPCs flag is set to '0'.» In your case, that no new record is added in the case of an update so the IKM does not change the flag.

  I'm not sure of your requirement either. You say you want to identify the column in which you have updated. How is an indicator will tell you what the column value has been changed? Maybe you want to know which line you have updated? If this is the case and lets say you set the flag to 1 in case of update what happens when another updated same record?

  I would suggest you add an updated time stamp column to your table and set of sysdate but in properties check only the update and will not insert. What that would do is update your record, it will fill the current date and time so that you can identify that this record has been updated.

  If you want to always go for the flag, then follow the same approach but in your mapping, change the value of the flag to 1 instead of 0 and new check only the update box (uncheck the box insert). In your create table statement the default value of this option to 0. So when the new line is inserted database is automatically assigned the flag to 0 and where there is an update, ODI it will change to 1.

  Thank you

  Ajay

• Why my GPS stopped suddenly when the location and the surroundings have not changed work?

  Why my GPS stopped suddenly when the location, a framework and the weather conditions have not changed work?

  Ros

  iPhone 4S OS 9.2.1

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If this does not work and to rule out a software problem, set it back to factory settings, without using any data backup later. Test the phone and if the GPS works again, restore the backup.

  If the GPS does not work after the factory reset, it is a hardware problem, and Apple has to repair the phone if GPS can be fixed.

  In the case where it cannot be resolved, it could offer to replace the iPhone 4s, if you are willing to pay the price for the refurbished phone.

  Out of warranty repair service

  If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
  Read the terms of Apple repair

  Model	Out-of-warranty service fee	Battery service *
  iPhone 6 s more, iPhone 6 Plus	$329	$79 * available only if battery Apple diagnostic test failure
  iPhone iPhone 6s 6	$299
  iPhone 5, iPhone 5, iPhone 5	$269
  iPhone 4S	$199
  iPhone 4, iPhone 3GS, iPhone 3G	$149

  In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.

  copied from: answer Service Center - iPhone

  
  

• In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist

  In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist, he said only "Connect burner and restart". I have already burned a music CD "RW", why he said burner "connect"? The burner is already installed? I tried the "Device Manager" thing wasn't working, thank you for your help. "

  Hello

  1. have you installed any third-party DVD burning software on the computer?
  2. could you give us the exact error message?

  Method 1.
  If you have installed a third-party software CD burning remove it and then try to burn the disc and check. Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Method 2.
  a. Click Start and type cmd into the search bar and press ENTER.
  b. in the type guest following command press ENTER.
     WMP.dll regsvr32.exe.
  c. close the command prompt and start Windows Media Player and check.

  Method 3.

  You can re-create the database of Windows Media Player and see if that fixes the problem.

  Stage i: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  Stage II: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.
  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
  c. Select the Media Player folder, and then click on Delete on the file menu.
  d. restart Windows Media Player.
  Note Windows Media Player automatically rebuilds the database.

  I hope this helps.