Help with a text entry field

Similar Questions

• Help with the text entry box?

  I recorded a presentation in practice mode, and a guest that I recorded for the learner "Please enter the number 20 domain xxx.  When I publish, the learner must enter 20, BUT the 20 that I typed in the field to capture the action required is visible, as well - the learner is required to type on the 20 who appears in the background.  Is it possible to have the 20 I typed in response to not appear?

  Thank you!

  No, it's a straight entry text box. Check the properties panel, accordion of Transition: set this no. transition, perhaps it fades.

  Lilybiri

• Average click boxes, and text entry fields are noted

  I create several CBT intended to show users how to navigate a new software. When I record, I choose the demonstration and training modes. For the part in training mode, I have several click boxes, and text entry fields. At the present time, when the user clicks on or between text, it has to click in the right place or enter the correct answer to move forward, otherwise a failure caption appears that says something to the effect of 'should have clicked here, please try again.' They try again and go to the next slide. When the training section is marked, everybody gets 100%.

  I was wondering if it is possible to create a user click in the wrong place or enter the wrong answer and still be able to advance to the next slide. So, not everyone would have a 100% automatic.

  Thank you!

  Mary

  P.S. I should also mention that I am using Captivate 4.

  Hello Mary,.

  As I wrote in my first response, simulation training is not intended to be marked. You should really start with a simulation of assessment to avoid having too many change thereafter.

  Have created a lot of assessments used in examinations (do not use an LMS, but this is not necessary) and my students would have been very happy if they could all have scored 100%.

  Enough joking. How you have configured the settings for the click boxes, text entry boxes, buttons? I give them only 1 attempt, never show failure, success, or legends of suspicion. As both actions for success or failure, I put in 'go to the next slide. The evaluation progresses so what was the action of the user, correct or incorrect. And the score will be awarded only if the user has performed the correct action. It works fine, really. If some actions need to be repeated several times, sometimes I will put the note of some of them to 0.

  Really think you can change the training simulation to work as an assessment, in the future it would be best to start with the last mode, possibly in combination with a demonstration or a training simulation.

  Does that help? My assessments are in Dutch, otherwise I could send you an example.

  Lilybiri

  PS: Be careful with the email reports, it does not always all right.

• Extraction of numbers, no strings of text entry fields?

  Hello

  I have two input boxes that I can type numbers in.  I would like a third entry check box to show the total of the first two.

  I set up a listener to button on the stage to perform a function that adds together when a key is pressed.

  It comes, he puts just the strings together - it ddoesn can't add them

  So, how can I tell Flash that box1.text and box2.text are numbers?

  Box3.text = box1.text + box2.text is not doing.

  Thanks for your time.

  Shaun

  Hi celebrities music

  You will need to get the string to a number.  Something like:

  var firstNumber:Number = Number (box3.text);

  var secondNumber:Number = Number (box2.text);

  answer: var number = firstNumber + secondNumber;

  Of course, you want to make sure that the text in the text field is actually a number and someone was not able to type in a Word.  The best way to do it is NOT to do the textfield a text entry field.  Instead make a dynamic text field and give it a MouseEvent.CLICK event listener.  When someone clicks on the dynamic text input field, bring up a keyboard that requires them to enter the number in this way.

  I have an application exactly like this one where students had to enter a number in a text field to understand the econ issues.  The workflow has something like:

  1. Click the dynamic text field
  2. Bring up the Enter key digital
  3. When the user clicks on a number on the keypad, text matching using a switch statement
  4. Add numbers to text in a string field, that way someone who, between '1', '3' '8' will get 138 and not 12.
  5. With each press of button, update the dynamic text field to show what the user enters
  6. With the user presses the Enter key, then mount this text field in number and store it in a variable of type number

  Hope that helps.  Let me know if you need help with the code for one of these steps.

• Text entry fields

  Hello.
  I have a clip that contains an e-mail form with text entry fields. This MC is then added to another clip which is then added to an another MC. When I test, text entry fields are displayed. The cursor changes to allow the input text, but you can not see the text and can't even see the white text boxes. Something that happens when the MC e-mail form is added to another clip, when you test the form e-mail MC on the main timeline, I have no problem.
  
  Help please as it is doing my head days.
  
  Thank you
  

  Yes they are, and after removing their everything works.
  You are the only person who was able to give a reason for my problem. We at flashkit or flashadvisor did not!
  I'll come here if I have another question.

  Bravo and thank you.

  M

• View 2 records text entry fields

  Hello

  New on ADF and want to know how to do a particular task:

  I have 2 lines with 2 different IDs and want to display two records one after the other, I can achieve this by using a table but I want to put the data in the text entry fields?

  FOR EXAMPLE:

  ID name City ZIP code

  1 Fred Bloggs Leeds LS1 2 minutes

  2 Gary Smith Liverpool L2 in 4NP

  is this possible?

  Thank you

  Hello

  You can make use of af:iterator. First, create a tree binding based on the data control and use something like this.

  It would show two lines of data. You can adjust the rows property to display the number of lines. If you want all the lines, remove the rows property.

  Arun-

• Pass a variable to a text entry field in a URL (was: I feel like it should be simple but)

  I think it should be simple, but I'm having a hard time finding how to pass a variable to a text entry field in a URL. I have a text input field ("enter your postal code') and a button that says 'Go '. When the user enters their zip and hit 'Go', I need the postcode, they came to pass in a URL to a new Web site so that they can see the offers in their region. This is a Flash 300 x 250 banner. Can someone help me?

  I can download my FLA somewhere and link to it if needed!

  Click on the frame that contains your go button and your textfield and paste Panel actions:

  go.addEventListener (MouseEvent.CLICK, f);

  function f(e:MouseEvent):void {}

  navigateToURL (new URLRequest ("http://namebrandinsurance.com/auto/newResults.php?zip=" + zip.text + "& submit = submit"));

  }

• Changing the position of the cursor in a text entry field and remove digital zeros

  Flash8 - AS2

  It's good to be back after all these years and thank you for the people of faithfull as kglad, Ned Murphy, Rothrock and all others who give much of themselves to succeed this forum!

  My problem:

  I have a text entry field that is named in the box of properties like 'numberOfKids '.

  When the program is run, and a DELETE or BACKSPACE is pressed input textfield turns off

  and all the calculations that use the "numberOfKids" shows NaN.

  I got trapped in NaN and indefinite so that a digital 0 appears instead of a white one.

  There are two problems:

  First problem:

  The cursor to the left of zero, so the first number entered by the user is 10 x larger than what they want.  0 becomes 10.

  Question: How can I get the cursor to the right of 0?

  Second problem:

  When I manually move the cursor to the right of 0 and a number of entry, let's say 4, it appears like 04.

  Question 2: How to remove the zero digital in input textfield?

  Thanks for the help.

  Here is the code I use:

  calculateChildWeight = function () {}
  If (isNaN (numberOfKids)) {}
  numberOfKids = 0;
  }
  If ((numberOfKids) == undefined) {}
  numberOfKids = 0;
  }
  If (numberOfKids > = 0 & & numberOfKids < = 137) {}
  numberOfKids = numberOfKids;
  } else {}
  numberOfKids = 0;
  }
  If (isNaN (adjustedChildWeight)) {}
  adjustedChildWeight = 0;
  }
  If ((adjustedChildWeight) = undefined) {}
  adjustedChildWeight = 0;
  }
  adjustedChildWeight = Number (numberOfKids *(-100));
  numberOfKids.setSelection (numberOfKids.length, numberOfKids.length);
  If (numberOfKids.length = 2 & & numberOfKids < 10) {}
  remove the first character or no leading zeros
  numberOfKids = numberOfKids;
  // }
  };

  More important answer first: you get two helpfuls and one correct answer per thread. I think that once you give a specific answer a useful, you can't give the same answer. But I don't know.

  First of all, make sure that none of these text fields have a property of vars set.

  Also, you don't need to do it in two steps: revisedValue =-100 * parseInt (numberOfKids.text)

  As you read the value of your textfields of entry by using the text property, you also assign the value of the more dynamic by using the text property. That's what you do, right?

• How to show that a text entry field is selected.

  Hello
  How can I show that a text entry field is selected when _focusrect = false; and I use flash lite.
  When the text input field is selected, I want to change is the border color or show a shape... something like that or even the color of the text.

  If anyone is interested, the answer is:

  When the field is developing the text will be empty
  kword.onSetFocus = function(oPrevFocus:Object):Void
  {
  KWord.Text = "";
  }
  When the update go away text will be keyword
  kword.onKillFocus = function(oNewFocus:Object):Void
  {
  KWord.Text = '- key word -';
  }
  :-)

• Help with body text field...

  OK so far, up to...

  I just finished the construction of a complex for my business. In this form, I created a wide page instead of text box field. So, my problem is simple, but I've not being not able to solve.

  When you type in the active form, the txt continues to insist on the first line and not able to scroll or to continue to the second line, he just continue on beyond the frame of the Txt box field...

  Any idea?

  Caleb

  Now I need to see the form... often you send by e-mail to [email protected] and indicate which field is causing you grief.

  Paul

• Text entry field

  How can I create a text input field?

  Here is an example with the e-mail. I hope this helps.

  https://www.box.com/s/sowbmfkh08y5amsrfy1e

• Automatic scrolling of text possible in combination with the text form field

  Hello

  We would like to know if it is possible to align the text automatically with a form field that can contain different amounts of characters.

  For example:

  We have a form with a text field for currency at the end of a paragraph of text. The period to mark the end of the sentence should always be printed just behind the currency field. For now, the comma character has a fixed place, just outside the scope of the currency field. It doesn't look good when the currency field contains only 2 characters (due to the white space).

  Is there a solution to this problem?

  Thank you.

  It is only possible if the time text is also part of a text field, preferably the same one. You can use a format or script validation to automatically add this custom text to text from the user, assuming that it is a fixed value or you can know in advance. If it is a value entered by the user, then it becomes almost impossible to do it gently.

• Help to the text entry area

  Hi all.

  I'm working on a project involving financial statements. I want that there is a default quantity in the text entry box. There are boxes of maybe 20 who would need a put option of default number in them. I just can't understand how do. The user will then put in the new numbering as appropriate, and then he'll see if it's the correct number or not. Don't know if I will check each one after you enter the number or ask them to fill it in there and click on submit. It's still a work in progress. Ideas on the default number would be useful.

  Lisa

  You must complete this variable, which can be made when you set these variables by placing it in the 'Value' field in the Variables dialog box.

  As I have explained, I have used which instead of use the literal value to make it easier to change this value for comparison.

  Lilybiri

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• JavaScript function to exchange the values of two text entry fields

  Hello
  
  I am a beginner APEX with the first application of the APEX. This app has a 22 page to enter data for a graph edge. There are two P22_LINK_NODE_A, P22_LINK_NODE_B text input fields.
  Sometimes it is necessary to toggle (swap) the values of these two areas.
  To do this, I added a button 'toggle_A_B' HTML and a Javascript function.
  
  But... it does what it is supposed to make :(
  By clicking on the button seems to send the page to the server, although this should not be the case... and the values of the fields P22_LINK_NODE_A, P22_LINK_NODE_B do not change.
  
  I didn't expect that everything goes right on the client side.
  Is it normal that the browser is trying to send the page?
  Do I need to implement something on the side Server? (process, branches,...)
  
  
  The "toggle_A_B" a button attribute HTML button: onclick = "toggleNodes (); »
  Redirect Optioanl of the button is set to "no target". (behavior is the same with "redirecting to page 22")
  
  In the "HTML Header" page, there is the following Javascript function (which works find in a non-Oracle-APEX HTML page).
  
  < script type = "text/javascript" language = "JavaScript" >
  function toggleNodes() {}
  var x = document.getElementById("P22_LINK_NODE_A").value;
  var y = document.getElementById("P22_LINK_NODE_B").value;
  document.getElementById("P22_LINK_NODE_B").value = x;
  document.getElementById("P22_LINK_NODE_A").value = y;
  }
  < /script >
  
  
  
  There is a post on the forum with a similar topic, maybe I should also use this approach to ($s)?
  
  Changing a value of the element in Javascript
  
  Kind regards
  Roman

  Roman:

  Set the target URL of the Html button

  JavaScript:toggleNodes();

  CITY