Reinstall the operating system

Similar Questions

• How can I reinstall the operating system with the recurring kernel panics?

  MacBook 1.1, white, plastic, 2.0/2x1GB/80GB/SD/USB.

  It used a lot, but want to keep going for special purposes.  Get kernel panic/black screen when I try to reinstall the operating system on a blank disc;  deleted before trying to reinstall Lion 10.7.3.  Tried other earlier versions of operating system.  Reinstall the memory chips and ordered new ones as a bet.  Made a "Lion" partition the Middle clone backup FW for my MacBook Pro, but there now El Capitan; window said I have bad installer in MB Pro; Cannot install on this new FW partition, but I don't know if this will help anyway.  Must be HW problem; nothing on the MacBook drive.   Diagnosis I could not complete either.  Impossible to wipe FW with the MB Pro, Lion and other stuff loading to attack the problem of HW?   Don't know how to do in this regard.  A new Disk Warrior 5 and old Tech Tool Pro.  Apple HW Test on the original disc from MacBook will not appear either?   Difficult OB!    Challenge yourself, please!   New mem circuits can do. ??

  So I'll try to attack it from the external hard drive, of course, I have to.   But how to find and eliminate the block HW?   Finally, go ask Apple support.

  It doesn't let me finish any operation!

  According to Mactracker, a Macbook 1.1 is limited to Snow Leopard 10.6, as the new OSX compatible.  Do you mean you had lion (10.7) installed?

  Ciao.

• Satellite L850D - 12 p: need to copy of Windows 8 to reinstall the operating system

  Hello

  I have a Satellite L850D - 12 p and need a copy of windows 8 to reinstall the operating system

  I deleted all the data on the HD including the recovery partition, I don't envy spening £30 order disks and want to download the

  The supreme macine provided with Windows 8...

  Thank you

  Jaz

  It of not possible to download a recovery image Windows 8!

  If you have not created the disc clean recovery or recovery USB flash stick memory such as mentioned in the user manual, you must order such environment.

• I have reinstalled the operating system on my Mac 10.6.8 & can't print duplex

  DeskJet 6988dt. I had to reinstall the operating system on my Mac 10.6.8. Now, I can not the boxes to select duplex printing. I tried to delete the printer in system preferences, turn off the printer, removing the duplexer, put it back in place, turn on the printer, reinstall the printer in system preferences. Does not help. I still can't get the selections for double-sided printing.

  Any suggestions?

  Marj

  Also, please make sure the accessory of the duplexer enabled in the settings of the print queue:

  1. Open the system preferences
  2. Go to print & fax.
  3. Open the print queue of your printer by double clicking its name.
  4. Click printer setup
  5. Ring the driver tab.
  6. Make sure that the box next to HP printing accessory two-sided (duplex unit) .

• Cannot see network on XP Server after reinstalling the operating system

  After reinstalling the operating system on our server, I can't see our server on the network. In the Service list after going to TCP/IP--> INSTALL network, I do not see "Sharing files and printing for Microsoft networks" in the category of SERVICES.
  I see all the other nodes in the network (which consist of several Win7 and Win XP machines).

  Hi BigGtheDood,
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional?

  I have a Dell Dimension 3000, service Pack3 & I would like to know how to reinstall the operating system xp professional.

  Thank you

  Dee

  Check maual of the user of the ignition key (e.g. F11) you need to press on when you first ask the computer to access the XP restore partition. If you have a "restore CD" the game that the BIOS so that the CD-ROM drive is the 1st device to start, followed by the hard drive. then power on the computer and "press any key" when prompted to start the installation.

  J W Stuart: http://www.pagestart.com

• Reinstall the operating system on the new HD

  Hard drive Presario CG56-109WM & out of warranty. How can I get the recovery disk or download to reinstall the operating system on new hard drive? Thanks in advance for any help.

  Order your Support here page recovery disks:

  https://h10025.www1.HP.com/ewfrf/WC/mediaOrder?softwareitem=630336-001&CC=US&DLC=en&LC=en&os=4063&Product=4308185&sw_lang=

  If usually using IE 10 the link does not work without turning off Compatibility Mode.Usually works fine with the browser Firefox or Chrome.

• How can I reinstall the operating system on the 4200 travel companion

  I received just an old Travel Mate 4200 and you want to clean.  How can I reinstall the operating system?

  There are a number of documents in our GTK this a reload of your Acer computer

• tried to reinstall the operating system and it crashed

  Acer One Netbook D257.

  Installed to 2 g of RAM (you have to take all this goes to do!) and since then the wireless is uneven right next to the router unless.

  So, I thought it would be a pilot. Tried to install the driver from Intel. That didn't fix it.

  So I thought I would start fresh by reinstalling the operating system using the Acer tool that backs up the user's data.

  Wonder of wonders, it doesn't at all now! System 7 House is caput! He starts up a message saying that Acer could not install the OS!

  Suggestions? How can I get a copy of "acer" of win7 to replace on this netbook?

  TIA

  Ron

  Alrighty then, here is the resolution!

  Apparently, there is a removable rear on this computer! You must know the 'secret' to open the door!

  The 'trick' is to remove the keyboard, and then there are 5 magic screws that release the rear panel.

  There are two right under the disk hard corners L & R and then there are three online in the upper part of the hard drive. One of those is to the left of the upper-left corner (probably as he field key 'E'?) Once you do this, dislodging then the back is yet another task. Fortunately for me, I pushed inside to understand. There's "brand" in the plastic that indicate you the five. Just look at the two bottom and you'll see what I mean.

  The other thing to know is that the back side of the Panel has hooks that need to go first when back, which means that it is NOT the starting point of prying eyes. The other 3 sides are 'snap' as push so I think that starting with a front corner notches to stop might be the best solution, otherwise you will destroy the hooks.

  The problem with dropping the network was the antenna wires that connect to the transmitter. They were loose. They do not have much of a loop service for them so when I raised the mobo to install memory, the first time, they jumped off. The antenna is located around the monitor bezel.

  Now, it works fine.

  Why they have not make obvious to repair this unit is a mystery. I guess for $250, it's a deal, but then you get watered to have someone for you install memory.

  If all goes well, I saved someone some $ and headaches this announcement.

  Enjoy

  Ron

• I lost the product key for Windows XP. I want to reinstall the operating system on my computer. Is there a way by which I can regenerate the key?

  How to regenerate XP product key

  I lost the product key for Windows XP. I want to reinstall the operating system on my computer. I have the CD and the product has been registered with Microsoft. Is there a way by which I can regenerate the key.

  http://www.magicaljellybean.com/KeyFinder/

  Tricky

• How to: format and reinstall the operating system

  Original title: is there a virus that downloads all the images that appear on windows xp family within 24 hours, I have acquired 17 000 images and used to my PC I want to enter windows in any mode

  I can't navigate what whether in safe mode with or without networking. How to flatten the system, which dates back to the original state that I'm not bothered about registering files images etc want just my PC to work

  Hi wendyspeariett,

  1. you receive an error message when you start in safe mode or normal mode?

  2. did you of recent changes on the computer?

  If you have access to the internet in safe mode with network, then you will need to scan the computer to remove all infections from the computer and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx 

  You can also use Microsoft Security databases to scan your computer

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  If you want to format new Windows XP installation, you can move forward.

  A new installation is to remove all data from your hard drive repartition and reformat the hard drive and reinstall the operating system and programs empty (clean) hard disk.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• Can I get an installation Win XP Pro Update CD includes SP3? The one I have now is pre - SP2 and reinstalling the operating system takes 4-EVER!

  My existing Windows XP Pro installation CD is almost a decade, and it precedes SP2. It's a nightmare, whenever I have to reinstall the operating system as ut takes a day or two to download Microsoft updates. Is it possible to replace my installation CD with a newer version, including a number of post-SP3 updates and SP3?

  You do this using a technique called "slipstreaming".  You start with a genuine XP installation CD and add in the necessary service packs and updates.

  If your CD-ROM is sp1 or 1A, you can just slipstream sp3.  If you have XP 'or' (pre - sp1), it is more complicated.

  There are many websites that explain how to do this.  Google for "slipstream sp3 of xp" or something similar.

  This site claims to have a script that will create a slipstreamed XP sp3 and all post-sp3 CD critical updates (description wrongly "sp2").  I the have not used and do not have any information on how easy it is or if she actually does what it says.

  See also http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/eff07503-cf09-4ada-b327-410d341450b9/

• Reinstall the operating system on Tablet PC TC1000

  Tablet PC TC1000-can not connect, domain has changed and now won't recognize password, HP recommended I have reinstall the operating system.  I have the CD system recovery but I don't have a disk drive on the Tablet, nor do I have a docking station.  How can I reinstall the operating system?

  Hi ERASMOTERAN,

  I suggest you contact HP support for re-installation of Windows XP:

  Contact HP
  

• "Don't use this CD to reinstall the operating system on Dell count" that I had in 2004 and have more... what I want to know I can install it on a different computer now and it would be legal?

  Original title: Original Windows XP cd.

  I have an original cd of Windows XP Home Edition with the product key for it and want to use it... but when I look at the disk, according to me, he said: "Don't use this CD to reinstall the operating system on Dell count" that I had in 2004 and have more... what I want to know I can install it on a different computer now and it would be legal?

  Because Dell SLP, the restriction of similar model is not important. All that matters is the EULA and the fact that the two computers are Dells.

• I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled.

  I have problems activating windows x 64 bits.

  I reinstalled the operating system on the same computer multiple times, however, this time it is said, I'm 'cannot be enabled. Recently, I updated my motherboard and changed to a quad core. I would appreciate help from the administrator. Legitimately, I bought my version of Vista x 64 tiger direct for years and relied on it as my OS for a while now. Any live medium or other assistance, advice, etc., would be appreciated. This operating system has been reinstalled several times, and the last time I had to reinstall it is because I closed windows because he wasn't updated correctly, and then restarting the operating system has not yet worked so I HAD to reinstall. Now windows says that my code is already used. I'm ready to take pictures, show my keycode and do anything to get my system online. Vista is saying I need to activate within 3 days. Also, I have problems installing Service Pack 1. Which maybe has something to do with my questions? Please, someone help me!

  Mark,

  In this case, you will need to contact Microsoft by phone for your landline number. Usually, most product keys have some time, they can be turned on before you reach this State.

  Best,