Help with access remotely for my husband who doesn't know a thing about computers! Laughing out loud

Similar Questions

• I have an old mac, I need any kind of software to download as illustratorCS4, don't know a thing about computers and am desperately need help

  Hello?

  Jess,

  In addition to what said the Test screen name, this is the system configuration required:

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  According to this, CS6 can run on 10.6.8.

  It can be purchased from Adobe, see here (you need to use the phone number to the bottom):

  http://www.Adobe.com/UK/products/CS6.html

• Background switch detected for MyApp (24) who doesn't have the tunnels open - defocus is NOT called

  I get the error "background switch detected for MyApp (24) who doesn't have the tunnels open - defocus is NOT called. Then the Simulator freezes and I can't do anything. Tried to debug but no luck!

  My application has two other entry points implemented from article http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/How_To _...

  Please see code below

  public class UserInterface extends UiApplication{
  
      public static void main(String[] args){
  
          if ((args != null) && (args.length > 0) && (0==StringUtilities.compareToIgnoreCase(args[0].toString(), "GUI"))){
  
              UserInterface theApp = new UserInterface();
              theApp.enterEventDispatcher();
          }
          else {
              try
              {
                  Wait();
                              SetTimer();
                  ManageResources mg = new ManageResources();
                  System.exit(0);
  
              }
              catch (Exception ex)
              {
                  if (RuntimeConfig.DEBUG)
                  {
                      System.out.println("UserInterface, main:  " + ex);
                  }
              }
          }
      }
      public UserInterface() {
          //  DialogDisplay dd = new DialogDisplay();
          pushScreen(new UserInterfaceScreen(this));
      }
  

  I also had this problem, the cause is that my computer is behind a proxy firewall so that MDS services Simulator cannot connect to internet, I added the following lines in the file rimpublic.property in the directory "Eclipse\plugins\net.rim.eide.componentpack4.7.0_4.7.0.46\components\MDS\config".

  application.handler.http.proxyEnabled = true
  application.handler.http.proxyHost = proxyserver
  application.handler.http.proxyPort = 8080

  These lines must be placed in the [MANAGER HTTP] section.

  It will be useful.

• I've updated my pc from windows xp to windows 7 since then I can not get my headset & mic to work. I know very little about computers and I need someone to help me, please.

  I've updated my pc from windows xp to windows 7. Since that time my headset & mic do not work. I know very little about computers, so I need some help, please.

  Not all Windows XP PCs, or their hardware is compatible win7.

  Usually if the PC manufacturer, or the manufacturer of the motherboard so a generic desktop computer provides no specific drivers for win7, its does not work

• Need help with LabVIEW code for motor control.

  Hello

  My name is Sasi. I'm a grad student BME working on my thesis topic of assessment for back pain spine implants. To do this, I'm building a test machine that would apply pure moments of a specimen of the spinal column. I use LabVIEW 8.5 to implement the control of a brushless AC servo motor. My requirement is

  Step 1: Initialize the engine.
  Step 2: Start moving it to a uniform to the right PLAN (this value of RPM too user can enter).
  Step 3: while doing step 2; at the same time read the couple cell data (acquisition of data using Asst.). DAQ o/p is 0 v to 10 V; 0 v is 10 Nm n
  10 v is + 10 Nm
  Step 4: What torque reached + 10 Nm, i.e. 10 V, the engine stops.
  Step 5: from the position where the motor stopped (IE not need to return to the initial position) start moving in the opposite direction to the same
  Uniform rpm as in step 2 at the reading of data in the cells of the couple.
  Step 6: once more what torque reached-10 Nm, i.e. 0 V, the engine should stop.
  Step 7: Repeat "Step 2" to the "step 6' 3 times.
  Step 8: Reset engine position.

  So far, I managed to get the engine to move backward @ a desired vel, the accl, deceleration for 3 cycles before n n. I enclose my code. I have a problem inserting the code for reading DAQmx amidst all this. Can someone help me.

  Thnks,

  Sasi.

  Hi Sonia,.

  I took a quick glance to your problem and I think I have a solution for you.  I certainly agree with the suggestion of the use of parallel loops Lynn.  This will allow the portion DAQmx run uninhibited by the part of the motion, and vice versa.  In addition, you need only perform an iteration of the loop of the movement whenever the voltage level exceeds a threshold.  Thus, by performing an iteration on the code of movement in the same loop are you iterate over DAQmx code, you essentially waste processor.

  I created a VI that should do what you are wanting.  I tested it on me and it works very well.  You have a tweak a few things to apply to your system (such as motion Council DAQmx and physical channel ID, etc.).  I used two parallel loops and event programming.  Basically, the loop of movement starts the engine turns at the specified speed.  Once the engine is running, he expects the DAQmx loop to tell him that the voltage value has crossed the threshold.  When the voltage value exceeds the maximum threshold (I put a value slightly less than 10 to jitter and saturation), the DAQmx loop indicates the loop of the motion that it may end its iteration.  The motion loop stops the motion, causes a reversal and repeats the motion.  Once the movement has begun, he expects the DAQmx loop once again to tell him that a threshold was held, but this time, it's looking for a minimum threshold.  I used "Occurrences" to implement the event programming in LabVIEW.

  I've commented the code pretty thoroughly, so I hope that comments will answer all remaining questions.  The advantage of using programs that focus on the event for this is that you save time processor, and your movement is more closely synchronized with the DAQmx.  Instead of one iteration of the loop of movement as fast as you can, updates every hour, you just put in pause and wait for the other loop to tell you when to start up again.  Meanwhile, the processor doesn't have to worry about an iteration of this loop over and over again.  In addition, when the accident occurs, you catch him immediately, instead of having to wait until the next iteration.  Thus, you are more closely synchronized with the DAQmx code portion.

  I hope this will help you.  Please report if you have any questions about the code or its implementation.  Good luck!

  
  

• And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

  And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

  Hi Alison,.

  You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

  Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

  Let us know if that helps you solve/Rolling back Photoshop.

  ~ Assani

• 2 VPN SITE to SITE with ACCESS REMOTE VPN

  Hello

  I have a 870 router c and I would like to put 2 different VPN SITE to SITE and access remote VPN (VPN CLIENTS) so is it possible to put 3 VPN in the router even if yes can u give me the steps or the sample configuration

  Concerning

  Thus, on the routers will be:

  

  Cisco 2611:

  LAN: 10.10.10.0/24

  access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
  

  access-list 100 permit ip 14.1.1.0 0.0.0.255 10.10.20.0 0.0.0.255--> VPNPOOL

  !

  10 ipsec-isakmp crypto map clientmap

  defined by peer 172.18.124.199

  match address 100

  !

  IP local pool ippool 14.1.1.1 14.1.1.254

  !

  access-list 120 allow ip 10.10.10.0 0.0.0.255 14.1.1.0 0.0.0.255
  

  access-list 120 allow ip 10.10.20.0 0.0.0.255 14.1.1.0 0.0.0.255 --> NETWORK REMOTE
  

  !

  crypto ISAKMP client configuration group ra-customer
  

      pool ippool

  ACL 120

  !

  Please note that the configuration is incomplete, I added that relevant changes, you should bring to the allow clients of RA through the LAN-to-LAN tunnel, of course, the LAN-to-LAN settings should match to the other side of the tunnel that is mirror of ACL, NAT and so on.

  HTH,

  Portu.

• Hi, I need help with installing updates for CS5

  Hi, I need help with the installation of the updates of CS5. I get the following message: some updates to installation failure. My product is already registered. Can someone help me, please?

  Erkan please download and apply updates directly from updates.

• Cannot use the account used for the trial period with adobe cc for ¿Someone teams who can help me?

  I created an account and downloaded the trial version of Adobe CC now I want to use this account to accept the invitation of license Adobe CC for teams , but I can't. I don't want to create a new account, I want to use the same one I used during the trial period.

  Please contact Creative Cloud for the support teams directly,

  Contact customer service - creative cloud to teams

• I need help with some Applescript for Postbox

  I was wondering if any of you can help me?

  I am writing a very simple script for my Postbox email application. It takes the selected message and turns it into a reminder. Everything works fine, but I want to take the subject assigned to the message and use it as the name of the callback list, and that's where it breaks down (topics are tags, as in Thunderbird and Mail).

  According to the dictionary, a message object counts among its subjects msg properties which is a list of subjects. According to the dictionary, a subject has three properties so, id, name , and color.

  I need only the first topic, so I do something like

  set theTopics to msg topics of theMessage.
  set theTopic to item 1 of theTopics

  no error reported, it returns a list, but when I then try to access the properties of the first article (= first subject), it is clear that something is wrong, and I think it's a bug/bad programming in the mailbox, but I'm not sure.

  When I do something like

  set ReminderList to name of theTopic

  He begins to complain. It is said that name (or id or color) is not available, as I can't get this to other classes, and it does not even return the class type for the element.

  It will return something that looks like this:

  class {show id "some topic"}

  no name for the class.

  And it seems that the text, but it behaves differently.

  How can I know what I'm actually deal with this object "topic"?

  What is - this actually to return?

  I don't know the app, but try to go back to theTopic properties.  That could make things a little clearer.

• I need 32-bit to run access remotely for the work but have Windows 7 (64)

  I have a new Dell with Windows 7 laptop. To work from home, I use a program of remote access that will not work with 64 bit but needs 32. I have been informed that I need to buy Windows Vista. Is this really necessary?

  Thank you.

  Hello Lyndaware,

  Thank you for your message.  64-bit operating systems will be run 32-bit applications, however, you might have been told that your application is compatible with Windows 7.  I would advise that you check with your IT support to get better clarification of why you need Windows Vista.  For now, Microsoft sold more Vista, but you may be able to find a copy online or through your local dealer.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Help with software updates for HP Officejet Pro L7500 Series

  Five updates have been identified as available when I used 'check the software updates' Solution Center.

  All updates failed to download. The updates are:

  Update critical HP product Assistant

  Critical update for HP memories disc creator

  HP update - security update

  Updated HP 4.0.12

  Update recommended to correct a problem with the sign up now product registration page

  TDA, since these updates are not required for your system and your printer that updates could not be installed on your system, however if you want to see what updates are available, then this is the web page to select your printer model, and then select your operating system and you can see the updates you need to update for your printer :

  link to select your printer model

  Once you click on the link above, you must click your series of model and then in the next page, click on drivers and software download link to see available software for your printer.

  Hope this helps you.

• Help with EasyLink Advisor for WRT54GS

  OK, when I try to make it appear the EasyLink Advisor to my router it says need administrator privileges, and then under that it says that you must be logged on as a user with administrator privileges to change the configuration of the computer for home networks. The thing is, though, that I'm logged on as administrator. I've never had this message before. I learned about the EasyLink Advisor repeatedly to find the IP address and other things so I can connect my Xbox, iPod Touch wifi and stuff like that. But now it doesn't let me do anything. I used to have Windows Vista on my computer, but then I upgraded to Windows 7 and I think this is the problem because it started to happen after I upgraded. Help!

  Yes easy Link Advisor is not supported on Windows 7.  You don't need it anyway.  Just connect to 192.168.1.1 with empty user name, admin password and check the router itself.

• Need help with the update for my 11 elements

  I have 11 items and just switch to the Canon 7 d Markii and shooting in RAW for the first time last night and the editor and organizer elements does not files because it does not acknowledge the BRUTE of the 'new '... device information I tried the update and he offered only a 7.4 update, where the 7 5 d Markii must at least a 8.7 update... How can I get the latest update if my program does not by itself? I DON'T like the way Canon program from the disk provided with the camera is set for RAW images, and I don't want to have to change all the RAW files to only align my items... I enjoyed how the older my camera RAW files were brought in Editor with the pop-up window which allow me to make changes to quick for photos before opening them in the editor... Yet once I don't like how the Canon window works for RAW images... Thanks for any help on this... Nicole

  Camera Raw 8.7 was introduced in PSE13. If your software is too old to be compatible. Yu have two choices:

  1. Upgrade to the latest version PSE14
  2. Converting your CR2 for Adobe (DNG) Raw and DNG files will work with PSE11

  The Adobe's DNG Converter is free, and you can batch process all of a file CR2 by selecting a source folder and destination folder.

  Download the latest DNG Converter 9.6.1 Mac | Win

• Help with dynamic scripting for drift property

  Hello

  I try to get the list nodes children, then loopthorugh the nodes to do some calculations in a property derived by using dynamic scripts. I tried with the below script.

  var childEnumerator is node. GetChildEnumerator();

  While (childEnumerator.MoveNext ())

  {

  var varValeurProp = childEnumerator.GetCurrent (). PropValue ("Custom.Salary");

  Print (propvalue);

  }

  While evaluating this script, I get an error below. No idea what I'm missing here?

  DRM-16008: there was a calculation Script Custom.TotalSalaryExp for EMP_Zone/Emp/PPD1 property error: TypeError: 'GetChildEnumerator' is not a function

  Please help me. Thank you fr your cooperation

  Kind regards

  Nathalie

  Try this instead...

  var childEnumerator is node. GetChildEnumerator();

  childEnumerator.MoveNext ();

  While (childEnumerator.GetCurrent ()! = null)

  {

  var varValeurProp = childEnumerator.GetCurrent (). PropValue ("Custom.Salary");

  Print (propvalue);

  childEnumerator.MoveNext ();

  }