help with audio! As soon as possible!!!

Similar Questions

• Need help with audio playback by default/current VISTA device

  Hello
  
  I need to get the current audio playback device in VISTA. It is quite easy to XP because I just get this information from the registry. My understanding is that things are different in VISTA. I was told you cannot change the unit but you can get the device using the following...
  
  -CoCreateInstance (IMMDeviceEnumerator)
  -IMMDeviceEnumerator-> GetDefaultAudioEndpoint (eConsole)
  
  Problem is that I don't know what to do with it. I guess it must be compiled with a library (compiler, library, etc...) I do not have)
  
  So... question, is there already a xtra that can get this information OR I can pay someone to do a xtra using the information above?
  
  If you are able/willing to help, please let me know as soon as possible because the project is due next week. I can pay you through paypal.
  
  Thank you!!!
  [email protected]
  

  Gary with Buddy xtra has been kind enough to add to the collection of boyfriend.

  Thanks again Gary Smith!

• Hi I buy chips 4900 rupees today. For the game teen patti app money on my account but not received unlimited chips in play please help cut me as soon as POSSIBLE.  Thank you and best regards I am Ashu Khatri

  Hi I buy chips 4900 rupees today. For the game teen patti app unlimited

  The cut on my account but not received money chips game please help me as soon as POSSIBLE.

  Thanks and greetings
  Ashu Khatri

  Contact the manufacturer of the App or iTunes and ask them about it.

• Help with audio.

  There is no audio on the timeline in Premiere Pro CS6. The music video plays well before the first import. You hsve of suggestions as to what could be the problem?

  If you have waited for the sponsor to happen and still do not see a waveform (and you have removed the clip and tried to import again... and again... and again once), you have the same problem, I got last week.

  I tried to create a DVD compilation for a member of the faculty who retire and received a bunch of clips (most H.264).  About half of them came in just peachy with audio intact.  Others wouldn't matter with audio no matter what I tried (even if they have played very well in the QT interval).  Because my back was against the wall, I just exported the QTPro aiff and m. as well as video first and had on my life.

  The final draft was delivered, I spent some time trying to diagnose the problem.  As near as I can tell, there was some corruption wave in the header files that would not be imported.  Windows Movie Maker threw a fit irritate on each of them (although FPC 7 does not seem to mind).  GSpot gave a warning that I did not quite understand.

  (Just like experience), you can try resaving them in QT Pro (will not transcode, it will just rewrite the header information).  Also, see if you can import other H.264 files.  And, of course, look at this bar in line; It is very, very important!

• Need help with audio sound

  Hello, my sound has stopped working one day to the other & no idea why. When I go to my info to speaker icon it says "No Audio" and the volume control is greyed out so cannot set or click on anything that is.   Anyone would be interested to help me with this remote computer assisstance through please?  Thank you.

  Ilona

  Hello Ilona,

  Thanks for joining us out on Microsoft Community Forums.

  It seems that the sound has stopped working suddenly. We will analyze and identify the cause of the problem.

  He would be grateful if you could answer a few questions to refine the question.

  1. What is the brand and model of the computer?
  2. are you aware of changes to the computer before the show?
  3. do you receive any error messages?

  This problem normally occurs when the audio drivers are corrupt. We will perform some troubleshooting steps and try to resolve the issue.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically repair audio playback problems:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  If the problem persists, you mast perform the steps described in the article.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Get back to us if you have more queries about Windows.

• Aspire V5 - 471G just updated Windows 10 Aniversary Edition need help with Audio driver

  I have problem driver Got on my v5 - 471 g ive got everthing operational with the 8.1 except the audio driver windows driver

  Help me!! BTW my laptop has been upgraded to windows 7

  and if you can link me to a page of 10 full for the Acer Aspire V5 windows driver - 471G since the driver on the product page will that until Windows 8.1 btw my laptop has been upgraded to windows 7

  So I installed your driver http://www.realtek.com.tw/downloads/downloadsview.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...    version 7.2.8000.17

  but nothing happens now, I search on google and found this

  http://support.Lenovo.com/id/ID/downloads/ds028945 version 7.2.8000.17

  I installed it even if the dolby in the taskbar icon is not but the open control panels > hardware and sound > sound

  Click with the right button on speakers > properties > dolby goto tab > there you go the toggle

  

  now, it sounded better thanks bro for the solution. So basically, what gives you is a driver of all it need is a user interface

• Need help with Audio Spectrum Max Height!

  So I have an audio spectrum I want to stop when it gets to a certain height in the computer and not just go on the top and out of sight.

  I thought maybe I could do layer that covers the audio spectrum, but not the other objects in the model.

  Any help?

  Here's and example of what I mean

  https://youtu.be/yiqznDG-uE0?t=25s

  At roughly 0:27 you will see the stops of the spectrum at a certain height and go any higher.

  Snap out with a mask or a linear wipe.

  Mylenium

• Need help with Audio conditional

  Hello again! So from the outset in a course, after a few slides of intro, I have a slide tri to direct users to other parts of a course (autonomous learning directed manner). However, I have an audio narration that plays at the entrance to this slide (slide no audio, it plays by advanced actions). I'm trying to find a way so that once they have seen this slide once on hearing and audio first, any time that they get referred to this yard slide, they hear no audio again. How this could be done?

  What I've tried: I tried two things, first of all I created a variable called Sort_Audio. Sort_Audio would be assigned to the output of the previous slide, a value of 10. At the entrance to the slide of sort, a tip action would check if Sort_Audio is equal to 10. If this is the case, it plays audio (and clears that another variable that is not related, I just need to do two things, I combined the). I have on the output of the triage blade a tip action that resets Sort_Audio to 0 so that when a user gets referred to this yard slide, it would theoretically not featured audio. Problem is in the first place for a reason any, it will play not even audio first.

  The other thing I tried was quite similar, but instead to assign values to the slides, I tried cpInfoLastSlideViewed and he equalled in the name of the previous slide, but also do the same for cpInfoPreviousSlide. None seemed to work.

  Any help would be appreciated! Thank you!

  I have demonstrated this workflow many times (DevLearn 2012, recently on an eLearning Guild online forum).

  You use any of the Exit event.  Have a user with a value variable initial (I used 0). Create a conditional action:

  IF v_visit equals 0

  Play the audio clip

  Assign the v_visit with 1

  ON THE OTHER

  Continue

  Lilybiri

• Help with audio slideshow

  Photoshop Elements 8.0 to create a slide show.   After the addition of audio, magazine show several times with no problem.  Then began to question to see play and audio and then audio will cancel and slide show continues.  Is gone before and exported for Premiere Elements 8.0 and audio played throughout in the review.  Exported to DVD.  Plays very well on DVD player, but when I try to play on computer, drive Windows Media audio (music) time for a while and then fires.  If I stop and close the player and open again see picks it up had stopped and appropriate music playing, but only for a while and then turns off.  Make several copies of this DVD for others to play.  Some will use a DVD player, some will use the computer.  Which ' understand.  Need help.

  Have you tried to play the DVD on another computer to see if it's your computer or DVD?

  The fact that he plays very well on your DVD player makes me think it might be something wrong with your computer.

• Help with Audio using the DD Realtek Audio Manager

  Hi all
  
  I recently bought a new computer and tried today for the first time to record audio to one of my movies.
  
  On my old computer, there is no problem, but now that I bought a gateway that has this installed Realtek HD Audio Manager, I can't save.
  
  When I click on the audio button, the guest comes telling me that he will have to establish levels of microphone.
  
  Usually when I talk, it turns green and everything is correct.
  
  Now, nothing.
  
  Is there something with this software Realtek or the passage system which does not allow me to register?
  
  Thank you
  PAM

  Hi, Pam

  I'm not sure how to put it in terms you understand fully, but I'll try.

  When the computers are made, there are certain pieces of equipment which perform the tasks we ask them. This material is provided by different manufacturers. For example, you use a computer brand Gateway, but the internal circuit and the equipment are supplied by different manufacturers. Then gateway buys components from all over the place. And in this case, the manufacturer of the audio component is called RealTek. Audio material can be hard connected directly to the motherboard or it could be a separate and external expansion card that connects to the motherboard via a slot.

  Any hardware component normally requires a component of special software called a 'pilot' to help the operating system (Windows) understand how to work with the material. The driver can also reside in a few different places. It can be supplied on a chip on the motherboard or the expansion card, or it can also exist as a file that is installed in the operating system. Or it could be a combination of the two.

  so, in this case, RealTek is the manufacturer of a specific type of audio material. Unfortunately, no version of Captivate include how to work with the material provided by the manufacturer. The really unfortunate part of all this is while Captivate has problems with it, other software happily works just dandy and won't complain a bit.

  So the answer to the part of your question, is that if you remove any aspect of your software from RealTek, kill you also probably the audio capabilities of your computer. In other words, that no sound would work under Windows or any other software. Regarding the installation of other software that would work, you would seek to eventually buy an extra sound card. Disable the RealTek hardware and install the new card and its associated drivers. And even then, there is no guarantee that it would work with Captivate or even Windows. (My son continued his tail for a literally weeks trying to make a sound card to work in an old PC)

  As you can see, taking that approach is much heavier and more involved that it would be just maybe start Windows Sound Recorder or Audacity, record your audio clip and save it. Then in Captivate, import it into the project.

  What a pain that you would have to work this way? You're talking about. But until developers can so why some material works and some does not, it is what we are facing. For what it's worth, we see a similar problem with Captivate not reliable detection and work with a Headset Microphone that connects via the USB port.

  I hope this was helpful... Rick

• My library files are damaged, or cannot be opened. PLEASE HELP URGENTLY! AS SOON AS POSSIBLE

  So first I received on my laptop, to notice that when I was on the tab start, my documents, music, photos, library folders were not working. When I went to the library, My Documents appeared as Documents.library - ms and the same with others. When I try to hit the properties on them, he said that the properties of this file cannot be opened. I need this problem as urgent. I already know the way of the real My Documents on the C drive, but I just need this problem. I'm not to have damaged files when I go to work. I made various methods, such as the libraries of the restoration, which did not work at all, it comes to replace the same files to library-ms. It has an icon of the White Page. Please, please help!

  Thank you!!!

  Open and run this registry file to repair the library file type association:

  http://www.SevenForums.com/attachments/tutorials/168982d1312706659-default-file-type-associations-restore-default_library-Ms.reg

• Need help editing photo as soon as possible please!

  Then I ran into a snag. I am relatively new to photography and very new to Photoshop. I did some head shots for a female without a light kit because I can just afford to get a still so I improvised with flashlights and my flash don't bounce from the ceiling. Well, that said, I'm happy with the photos except she has a shadow of "moustache" terrible lower lip. Is any way to remove it? I tried several different things and I did not like the results so if anyone is willing to help, I'd be very happy. Thank you!

  One of the best ways to retouch faces uses a method called frequency spacing, but if you're new to Photoshop, this could be difficult. There are a lot of video tutorial on that. Basically, split you your image in two layers: one for retail and the other for color and tones. Then, it is easy to correct dark areas as one you mentioned on the lip by adjusting layer low frequency. Here is a link to one of the many videos:

  The amazing power of the frequency separation retouching in Photoshop - YouTube

• Help with Audio Player

  I try to import a Player audio swf in my project.  It imports ok I don't know how to add music to it while she plays or where I can change the code.

  My project is in place to: http://http://jeffstonebraker.com/beta/Main.html the fxp file is here: http://jeffstonebraker.com/beta/PovertyFlats.fxp

  the audio player is available here: http://www.premiumbeat.com/flash_music_players/original/mini/

  Thanks for your help.

  Jeff

  Jeff-

  That player would not work in Flash Catalyst. The way the third component works is in the HTML containing for the audio player file, you add the path to the mp3 file in the FlashVars parameter. This information cannot be used in Flash Catalyst. You might want to look at this article on creating custom controls Media Player in Flash Catalyst CS5 to build a nice audio player in Flash Catalyst.

  Good luck!

  Chris

• Help with audio crossfade

  Hi all, please accept my apologies if this is in the wrong forum, or if already responded ithas elsewhare - ive searched but no luck!

  I'm new to the first elements 8, a previous user 3. I try to use the audio crossfade transition but without success. I drag the icon on the audio track between two items, but I can't place it in the center of the two clips, only on a clip or another. I've been to the Properties section and selected "Center cut", which places the transition on two audio clips, but the audio does not merge and melted at all.

  I don't know this is a mistake on my part of the user, but I can't understand what I'm doing wrong!

  p.s., despite downloading all updates, I see again "display performance will be poor due to bad graphics card or driver functioning". Will be this never get sorted?

  Thanks in advance,

  Andy

  I had the same problem and solved.

  You have "handles" at the end of the beginning of the incoming and outgoing clips? that is a small amount of the item that is not used. If you used the clips right to the last image and as soon as the first image then PrE has nothing to fade and to. The fade on begins at the point of cut, also the appearance. If there is no "overlap" to "not used" clip then PrE can't crossfade.

  The answer is not to use the clamp to the last frame, or the first image, if you intend to do a video or audio Crossfade.

  I'm not sure I've explained clearly, but I know what I meant!

  I use PrE8.01. Not sure than previous versions

  Alan S.

• INCOMPATIBILITY OF THE DEVICE AND NEED HELP AND RESTORE AS SOON AS POSSIBLE - COSTUME

  Hello, I got this dashboard of my father, and it was already registered by someone else then I decided to reset and that came - incompatibility of the device and costume

  I need someone to clear my dashboard it please

  Thank you

  MAC 20:7: 8F:2 C: 5B: AD

  Series: 8120945

  firmware 1.7.1415

  Hello. I'm having the same problem. I bought mine to someone else who has registered to it, but I still get this error. Apparently it must be eliminated by SONY in their database, but no idea how to do this. Come on SONY reps, help us.