Help with blank screen character health and rating system

Similar Questions

• need help with my screen has been using mouse and the screen is smaller and smaller

  need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

  Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

• help with blue screen of the 0x1000007e

  Hi, can I get help with freezes my computer?

  View blue screen information:

  ==================================================
  Dump file: 121015-27421 - 01.dmp
  Crash time: 10/12/2015-20:41:47
  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  Bug check code: 0x1000007e
  Parameter 1: ffffffff "c0000005
  Parameter 2: fffff880'0463f0d2
  Parameter 3: fffff880'03b378d8
  Parameter 4: fffff880'03 b 37110
  Caused by the driver: rtbth.sys
  Caused by the address: rtbth.sys + 2185c
  Description of the file: Ralink Bluetooth adapter
  Product name: Ralink Bluetooth adapter
  Company: Ralink Technology, Corp..
  File version: 2.9.22.0 built by: WinDDK
  CPU: x 64
  Plant address: rtbth.sys + 130d2
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\121015-27421-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 9200
  Empty the file size: 284.744
  Dump of file time: 10/12/2015-20:42:49
  ==================================================

  ==================================================
  Dump file: 120815-32078 - 01.dmp
  Crash time: 08/12/2015-11:38:26
  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  Bug check code: 0x1000007e
  Parameter 1: ffffffff "c0000005
  Parameter 2: fffff880'058d40d2
  Parameter 3: fffff880'033dd8d8
  Parameter 4: fffff880'033dd110
  Caused by the driver: rtbth.sys
  Caused by the address: rtbth.sys + 2185c
  Description of the file: Ralink Bluetooth adapter
  Product name: Ralink Bluetooth adapter
  Company: Ralink Technology, Corp..
  File version: 2.9.22.0 built by: WinDDK
  CPU: x 64
  Plant address: rtbth.sys + 130d2
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\120815-32078-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 9200
  Size of the dump file: 284.800
  Dump of file time: 12/08/2015-11:39:44
  ==================================================

  ==================================================
  Dump file: 120515-23000 - 01.dmp
  Crash time: 12/05/2015 14:11:48
  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  Bug check code: 0x1000007e
  Parameter 1: ffffffff "c0000005
  Parameter 2: fffff880'058c00d2
  Parameter 3: fffff880'0609a8d8
  Parameter 4: fffff880'0609 has 110
  Caused by the driver: rtbth.sys
  Caused by the address: rtbth.sys + 2185c
  Description of the file: Ralink Bluetooth adapter
  Product name: Ralink Bluetooth adapter
  Company: Ralink Technology, Corp..
  File version: 2.9.22.0 built by: WinDDK
  CPU: x 64
  Plant address: rtbth.sys + 130d2
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\120515-23000-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 9200
  Size of the dump file: 284.800
  Dump of file time: 12/05/2015 14:13:26
  ==================================================

  ==================================================
  Dump file: 120315-46625 - 01.dmp
  Crash time: 12/03/2015-21:46:50
  Bug Check String: PAGE_FAULT_IN_NONPAGED_AREA
  Bug check Code: 0 x 00000050
  Parameter 1: fffffa80'0f7e35b8
  Parameter 2: 00000000'00000000
  Parameter 3: fffff880'010985da
  Parameter 4: 00000000'00000000
  Caused by the driver: mpsdrv.sys
  Caused by the address: mpsdrv.sys + 88215 b 8
  Description of the file: Protection of Microsoft Service pilot
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.2.9200.16753 (win8_gdr.131030 - 1505)
  CPU: x 64
  Plant address: ntoskrnl.exe + 5 has 540
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\120315-46625-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 9200
  Size of the dump file: 284.800
  Dump of file time: 12/03/2015-21:48:50
  ==================================================

  Ntoskrnl.exe and rtbth.sys have been mentioned in the 3 last crashesmpsdrv.sys only in the first

  News of the event viewer:

  I saved a lot of event that happened in 08.12 accidents and 10.12, marked with red circles with white cross

  and some other events around them

  pastebin.com/xwU9pVf4

  (its in Spanish)

  I have not installed manually a new hardware or driver, the last accident occurred when I took the computer to sleep in airplane mode

  This phenomenon was related to adapter Bluetooth Ralink from Ralink Technology, Corp. rtbth.sys.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Help with black screen on inspiron 9400 with geforce 7800 go

  Thanks in advance to anyone who can help me

  I have an inspiron 9400 with geforce 7800 go, and for these last days, when I start the computer, I get a black screen or a very pixelated windows which then goes to the blue screen of death and said that 'nv4_disp' is blocked in an infinite loop and that there is a problem with the device or the driver, I tried out the video card and re-allocation of places She who does not worked, so my question is, how would I go to get a new card, and what other cards I could possibly updated too, any help on that would be great

  
  

• Need help with Sprite´s. (Rectangles and circle)

  Hello!

  I kinda need help with a project. I m supposed to do a script that responds to a click and moves the circle of one rectangle to another.

  (Here's a picture)

  

  So, what I want is: when I click on the blue rectangle to the right, the circle must move instantly in the rectangle on the right. And same thing on the opposite path.

  Thanks in advance!

  -Best regards,.

  Aleksandar "Dyxir" B.

  import flash.events.MouseEvent;

  leftRec.addEventListener (MouseEvent.CLICK, fCircle);
  rightRec.addEventListener (MouseEvent.CLICK, fCircle);

  function fCircle(evt:MouseEvent)
  {
  Circle.x = evt.currentTarget.x;
  Circle.y = evt.currentTarget.y;
  }

  Note: Point for all alignment: Center

• Help with installation of Windows Mail and gmail! error message with Port: 143 and Code: 800ccc0e

  I need adjustment help my email on gmail to my windows live account.  Currently I have a local account of cable for my email and need to change to an e-mail account that will be permanent.   I can't seem to get Windows Mail (Vista) to accept my gmail or hotmail account.  I've finally set up the gmail and it gives me an error when searching for files.

  The error is:
  Account: imap.gmail.com
  Server: IMAP.gmail.com
  Username: (username)
  Protocol: IMAP
  Port: 143
  Secure (SSL): 0
  Code: 800ccc0e

  Hello

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Change the setting above

  Server: imap.gamil.com

  User name: user name

  TO

  Server: imap.gmail.com

  Username: * address email is removed from the privacy *

  Step 2:

  a. check that IMAP is enabled

  b. http://mail.google.com/support/bin/answer.py?hl=en&answer=77695

  c. check that your settings are correct:

  i. IMAP server is imap.gmail.com. If no joy, try Photoscape

  II. connection is your full email address, no username only.

  d. check if antivirus interferes. Disable check incoming mail antivirus.

  e. check if your ISP is blocking Gmail

  f. troubleshooting of IMAP

  http://mail.Google.com/support/bin/answer.py?hl=en&answer=78774

  Method 2: You can temporarily disable security software and check if the problem still persists.

  Disable the anti-virus software

   http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Make sure that you activate the software antivirus and other security programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if that helps.

• 6 s iPhone restarts with black screen randomly. However, the system always restores the same question.

  I have an Iphone 6 s 128GB. The iphone automatically restarts with black screen and there is no particular application I use when it crashes.

  I did a system restore twice but still the same issue. Could someone please help?

  If the restore does not solve the problem, it is high time to take your device at the Apple Store for more diagnoostics. This may be material / display problem. Good luck.

• PLEEEEZE... Help with specing on a new PC, NTSC system CS5.5 (links included)

  Help with specing on a new PC NTSC with CS5.5 Master Suite. Windows 7, 64 bit. Will be used mainly for PP & still, some AFX & PS. editing a lot of avchd! Calendar usually between 1 1/2 to 2 hours in length, 2 or 3 LAYERS.

  I've seen the benchmark page but found very confusing. I also read the forum reading many posts similar but found submerged :-)

  KEY CONCERNS: Not sure, the choice of the video card or whether to go 6 core. I don't want to spend much more, unless I need to.  Ideally I would like to put all THE project files on the DRIVE 2 Raid 0 without divide them upward on separate drives. I'll be able with such a system?

  PROCESSOR: Intel Core i7-960 3.2 GHz LGA 1366 converted (boxed) SKU:275222 $199.99 boxed processor (I could go octacore, don't know yet)

  http://www.microcenter.com/single_product_results.phtml?product_id=0330706

  Or should I go 6 octo core? : $594^.99

  http://www.Newegg.com/product/product.aspx?item=N82E16819115066

  VIDEO card: Zotac ZT-40201-10 P GTX 470 1280 MB GDDR5 PCIe 2.0 x SKU: 838375 ((IS THIS THE BEST CHOICE?)) $200.00
  

  http://www.microcenter.com/single_product_results.phtml?product_id=0342176

  24 GIG RAM: Kingston HyperX memory 4GB 240-pin DDR3 SDRAM DDR3 1600 desktop

  http://www.Newegg.com/product/product.aspx?item=N82E16820104244 $186,00

  SYSTEM DRIVE: Western Digital VelociRaptor WD3000HLFS 300 GB 10 000 rpm 16 MB http://www.newegg.com/Product/Product.aspx?Item=N82E16822136322 $149.99

  VIDEO PLAYERS: 2 DISCS VIDEO software RAID 0: Seagate sata 6.0 3TO http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215 x 2

  Dump of disk: Seagate sata 6.0 3TO 1 http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215.00

  Motherboard: ASUS Sabertooth X 58 Intel LGA 1366 X 58 SATA 6 GB/s USB 3.0 ATX Intel MB http://www.newegg.com/Product/Product.aspx?item=N82E16813131665

  BLURAY BURNER: Pioneer black Blu - ray burner SATA BDR-206DBKS http://www.newegg.com/Product/Product.aspx?Item=N82E16827129066 & Tpk = BDR-206DBKS $109

  : COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP black steel ATX full Tower Compucase case with USB 3.0 and inner black http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160 & cm_re = 2-_-11-119-160-_-Product COOLER_MASTER_HAF_93

  $154,48

  Power SUPPLY: Thermaltake Black Widow W0319RU 850W ATX http://www.newegg.com/Product/Product.aspx?Item=N82E16817153106

  $129.99

  1 Yes

  2. 4 GB. DDR3-1600 + in a bag to hex or 2 packs of sorting of the brand and the desired model.

  3. why not get the new GTX 570 or 580? They are more silent and cooler.

• voice on envy 17 and the system often hangs with blank screen and blue circle

  ENVY 17 P/N 17 t-1000 CTO Win7 IE8

  1 ICES Vo as movie dialogue comes out of the speakers.  Every minutes for about 10 seconds.

  2 MS word or Excel often will not come to the top of the bar of tasks or office.   After reboot, they will usually come from the taskbar.

  3 Itunes come from office.

  4 screen turns often white with small blue circle after clicking on an element.  It will stay this way for indefinitely sometimes requiring a forced shutdown.

  5. the problem with "solve computer problems" in the Panel.   Screen turns white with blue circle.  After several error minutes message "C:\windows\system msdt.exe the dependency service or group was able to start.

  6 Internet exp come always clicking on the taskbar.  After reboot, IE will ususally developed.

  7. the documents or files desktop happened as after a long delay.

  System is unpredictable.  Any help would be appreciated.  Support Norton has done an analysis of the system and diagnosis and system clean.  Thank you

  First remove the hard drive as the culprit in the hang ups and delays. When starting the laptop type press F2 to enter the HP Diagnostics and start a test of expanses of hard drive. It can take more than 2 hours. If the test succeeds, to focus on the software. go to msconfig, Startup tab, check turn off all startup programs, click on apply. It also seems that you need to update your graphics driver. do this at hp.com http://www8.hp.com/us/en/support-drivers.html or go to the site of graphics card manufacturer. I hope that your Windows updates are also underway. You have a lot of problems, if it is not related to a hard disk problem, full recovery would solve most of them.

• Install and help with black screen / timeout

  I'm pretty new to the scene of the VM and try to configure the ability for my bosses to connect to a virtual desktop, while they travel.  I have setup a Viewserver, a vCenter and a main domain controller.  I send you all the traffic through our firewall through the DMZ in the Viewserver.

  When I test this connection locally from a PC on the same network through the Client view, it seems to work fine.  I have a beautiful office in Windows 7 can be used.  When I leave the office and go to any other Internet connection, I have a login name, provide connection information, and then a black screen and that's where he stays.  In the end (after 15-20 years or more) he told me that the remote connection has been completed.  Short version is it works on the inside, but not outside.

  I have reviewed this error a few messages found and have made several steps such as insurance there is no active internal firewall (will re-enable them and fix them after I understand this), checked the Viewserver can properly search the PDC, the vCenter and so on.

  I'm really stuck here and have tried different things for several days.  That's a lot of your time to test, because it works fine locally, so I have to leave the building and get an external Internet connection to test it out-> in.  I have the public IP address of the Ste of connection on its own domain.

  For the purposes of this question, it is publicip.mydomain.com

  Internally, the machines are set up as:

  PDC 192.168.11.202

  vCenter 192.168.11.203

  Viewsrv 192.168.11.204

  The firewall is DMZ had to 192.168.11.204.

  Any help would be appreciated in the sovereign.

  Thanks for the update.

  If you have double checked these three steps, then it is probably time to use Wireshark to see what is blocking PCoIP in your environment.

  Take a look at this post for more information on this. http://communities.VMware.com/message/1860992#1860992

  You can initially run wireshark on the Client from the view, and then if that does not indicate where the Eastern bloc, then run it on the Security server. Look at just the traffic PCoIP. (4172 TCP and UDP 4172).

  This is how some other people have fixed what you see.

  Select this option.

• Greetings! Need urgent help with BLUE screen, I HAVE MY FINAL COMING towards the TOP AND NEED to WORK!

  Hi, this is the 8th time, I have the blue screem of death and I am unable to find specific solutions for my case is the following:

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini041511 - 05.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 24
  BCP1: 00000000001904AA
  BCP2: FFFFFA600AE74D58
  BCP3: FFFFFA600AE74730
  BCP4: FFFFF800028F0EDD
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  I would be really grateful to those that could help because my final exams are around the corner and I do most of my studies online...

  Hi axmankay,

  Method 1: you can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/BCCode-24/adfa4cc3-CF61-4797-a7de-1f15323b3f01

  Method 2: See the steps mentioned in the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)

  I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate.  The iPhone does not accept my Apple ID.  He is looking for an address icloud.com.  I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck.  Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office).  Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen

  To be honest, I was going to pick up a new phone this week anyway.  My concern is now that I don't want to not suddenly faced with the same problem.  This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.

  It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.

  Thank you all for any help

  If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.

  If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Windows Live Movie Maker and DVD Maker

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

  Thank you.

  /PR

  ===============================================
  First of all a question... did you you save the project in a video such as format
  . WMV or. MP4? Or have you just of WLMP project folder?

  I suspect that DVD Maker is to see your movie in one file
  and he has no idea where are your scenes. More than likely it is
  creation of scenes on his own in arbitrary places.

  In order for DVD Maker correctly, identify individual scenes
  each stage must be registered as an individual video clip, then
  the collection of video clips can be imported and each of them must
  become an individual scene.  DVD Maker is supposed to accept
  up to 18 scenes.

  Just an experience you can import your new original
  video clips in DVD Maker and see if it works properly. If
  It does what you want... change and re-record your clips one video
  both will be the fix.

  Good luck...

• need help with laptop screen

  I hope someone can help me. I have a HP Altec running windows 7 and I have the following problem...

  My computer screen goes white bright, and there are also lines that sometimes appear.  I have to close the cover and try to connect to my office.  And there, he just can't be all the time. My computer is about 1.5 years old?  I'm doing something wrong? Any help would be great. Thank you

  Looks like you may have a defective display unit. You can read other messages about similar problems with display.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/horizontal-flickering-lines-on-DV6-screen/TD-p/829137

  If the display driver update does not solve the problem, I would recommend that you bring your laptop to an HP repair center authorized nearest you for further assessment.