Custom host summary report

Similar Questions

• How a host Summary Reports on the entire inventory?

  We have a lot and lost guests and would like to make a report of synthesis host in all areas. VIC, I can only do this one host at a time. It would be nice to choose a data center or the entire inventory and run this report. Any ideas on how to do something like that?

  Kind regards

  Garrett

  What characteristics do you look for in the host State? It's simple enough to write powershell scripts using the box tools VI and all data you like to export to a csv file.

  Here is a simple script that will give you the inforamtion on a virtual machine. It will give you the name, host, powerstate, memory, numcpu, IP, & hostname.

  $IPprop = @{name = 'IP address'; Expression = {$_.} Guest.IpAddress}}

  $HostNameProp = @{name = "Hostname"; Expression = {$_.} Guest.Hostname}}

  Get - VM | SELECT name, host, powerstate, MemoryMB numCPU, $IPprop, $HostNameProp | Export-csv c:\vm_info.csv

  -Sid Smith

  http://www.dailyhypervisor.com

• SCSI/RAID Host Controller, reports "tv_ConfigMgrErr39".

  I ran the reliability and performance monitor on my laptop and the SCSI/RAID Host Controller has been highlighted that does not properly.

  The information contained in the diagnostic reliability monitor results and performance are:

  * Symptom: * _Device drivers marked as corrupt. _
  * Cause: * a device has a configuration issue preventing it from working correctly.
  * Details: * the device, the SCSI/RAID host controller, reports
  'tv_ConfigMgrErr39 '. This device won't be available before the question
  is resolved. The Plug and Play ID for this device is
  ACPI\PNPA000\4-4D18F2DF-1.

  When I check the SCIS/RAID Host Controller Properties, it says under device status:
  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  To search for solutions, nothing is found. There is also no driver software to be updated.

  Would it be the result of some kind of change due to an update or
  something, I ran the monitor first getting the computer (a little
  For more than a year) and has not been advised of any errors. I posted this information in the Microsoft forum and was advised that submit a post here can find me an answer and also to check the appropriate driver downloads. My computer is telling me to contact the manufacturer of your device to download the software, but in its properties, there is no listed manufacturer. I can't get the Toshiba site for a download of driver that I have no idea what this component is and have no idea where to start!

  I would be grateful for any advice (relatively uncomplicated!) and a gentle nudge in the right direction of a appropriate driver.

  Thank you very much
  Sarah

  Hello

  To be honest I don t know what you re talking. It would help if you could post some information like your laptop model.

  39 error code usually means that there is a driver problem so I updated the driver. You can find the latest version on the Toshiba site.

  Sorry mate, but that s all I can say at the moment.

• Service-level summary report

  Hi team

  We try to run the iterator level summary report Service. We need to be run daily, but only the specific services we have created...

  But this report runs by default for all services created.

  is it possible to restrict the services for which I need this reprt to.

  Please find attached the report view used and the definition of the view that is used...

  Please help us get similar information for specific servers...

  Additional accessories:

  • 
    Definition.jpg

  Sriram,

  Your needs are feasible. I configured a solution to meet your needs.

  I created the following:

  A new request

  A new view of iterated by copying existing services see iterates

  Then after dragging the view of the report to a report, you use input can be set to set a list of FSMCategories

  I'll send some screenshots

  David Mendoza

  Foglight Consultant

• Navigate from a (summary) report to other (detail)

  Hello friends.
  I am trying to build a summary report with two columns.
  Column A column B
  ABC PQR
  ABC XYZ
  DEF LMN
  DEF RST
  That is to say it is a unique value in column B.
  Now, what I want to achieve is, if we click on any value in column B, a detailed report opens showing this value and some additional data.
  Column A column B column C column D E
  ABC               PQR              ...               ...               ....
  
  ABC               PQR               ...               ...               ....
  
  ABC               PQR               ...                 ...               ....
  
  Assuming you click PQR, synthesis report, detail report will look like above.
  
  Basically the detailed report will be initially built for each value in column B of the report. When you click on PQR it filters the second report and display only the values for it.
  The report must be run from the table edge and that the link from summary report that we will be provided.
  Please guide me on how to do this. Any idea will be useful. Thank you...

  Hi Max,.

  The best way to achieve this is through a navigation. Make two reports, one with the summary and the other with the details. Make sure that they both use the same domain that the filtering will be more difficult, and sometimes impossible. The target report (the wave with the details) to define a filter "is invited" on column B. In the synthesis report, define the interaction on the navigation (to the detail report) on column B.

  It should work.

  Best regards, Tim

• Generate custom for the host storage reports

  Hello

  I have a use case where a I need to generate storage reports customized for i.e host host-> screen-> storage reports (reports on :) is an extension on reports taken hosts storage supported? I've seen examples of views views of performance or monitor. Please see the attachment for details

  If the case is taken over the extension on storage reports, we add another report for the reports on as an action?

  Thank you!

  Sorry, the points supported only buckets are those described in the SDK Programming Guide (and in document ExtensionPoints.html)

• CSQ Call Distribution summary report customized with 5s and 20 s model for UCCX 10.6 required

  Dear all,

  We have UCCX with recently upgraded to 10.6 HA. After upgrade, we are not able to generate the CSQ Call Distribution report for every 5/20 sec.

  We contacted TAC and found we need to have autonomous cuic but we donot have in our environment. There is demand for improvement already triggered with Cisco for this defect, Cisco still to develop fixed a bug for this version.

  Ask you to provide me with this model of the said report to import into our UCCX of 10.6 to generate reports required by our care.

  Had the same problem after upgrade of 8.5 to 10.5 UCCX. I was able to modify an existing report to get 5 seconds interval.

  I exported the existing report. Imported in CUIC stand-alone server, query list value with interval of 5 seconds:

  select 5 as ID,'5' as value from table(set {1})

  Also changed the column names in the report. With 5 seconds interval, we have 4 great call distribution intervals: 0-5 sec, 0 to 10 sec, 0-15, 0-20 sec. Unfortunately, when I downloaded my report to the initial report UCCX CUIC was broken (I think because of the internal report id duplication), but the new report works very well. Check out the screenshots and my below custom report template.

• calculation of the values in a script powershell to host - summary.hardware and summary.quickstats information

  Hello

  I run the below script but you want to change it so that I can add the Maximum available CPU and % CPU used statistics in the table by a calculation, I just get the syntax right as you will see highlighted below.

  I would really appreciate the help.

  Thank you

  Dan

  $Report = @)

  $ESXHosts = get-VMHost | Sort name | Get-View

  ForEach ($ESXHost to $ESXHosts)

  {

  $ReportObj = "" | Select the name, 'Active VMotion', 'Connection status', "Global CPU", "Max CPU", "% CPU used.

  $ReportObj.Name = $ESXHost.Name

  $ReportObj. "" VMotion enabled "= $ESXHost.summary.config.vmotionenabled

  $ReportObj. "" Connection status "= $ESXHost.summary.runtime.connectionstate

  $ReportObj. "" Overall CPU "= $ESXHost.summary.quickStats.overallCpuUsage

  $ReportObj. "" Max CPU "= (($ESXHost.summary.NumCpuCores$ESXHost.summary.NumCpuPkgs$ESXHost.summary.CpuMhz))

  $ReportObj. "" CPU % used "= (($ESXHost.summary.quickStats.overallCpuUsage)/ (($ESXHost.summary.NumCpuCores$ESXHost.summary.NumCpuPkgs$ESXHost.summary.CpuMhz))) )

  $Report += $ReportObj

  }

  $Report | ConvertTo-Html-of title 'Advanced Host' - body "& lt; H4 & gt; Advanced Host Information & lt; / H4 & gt; » | Out-file - add $filelocation

  Sorry, take out the quotes.

  $ReportObj. (' ' Max CPU "= ($ESXHost.summary.hardware.NumCpuCores) *($ESXHost.summary.hardware.CpuMhz))

• How to add ID/batch number in the naming of the batch summary report and STD files generated by the sequence editor of

  Hello

  How to add an Id(which is inputted in the Configure Lot Setting) a lot in the naming of the batch summary and report STDF files generated by the Test Module of the semiconductor.

  Currently the default name is shown in the excerpt below

  

  Thank you

  Rovi

  Hi Rovi,

  Have you tried the recall of ConfigureLotSettings or some of the steps listed in Cusomizing behavior for batch parametersof edition?

  Kind regards

  John Gentile

  Engineering applications

  National Instruments

• How creat a summary report with txt.

  Hi all

  I want to create a summary of the report with .txt, and I disabled the feature of report generation in teststand.

  I created a complex sequence, includes some sub-sequences, example: the UUT is tested on three different temperatures and four different voltages conditon. So I creat three subsequences (different temperatures) there are four steps (different voltages), then mainsequence invoke three subsequences to excute test.

  I only want to get the fail-no summary, include: name of the step-fail, status

  How do I? Thank you very much

  You can use Parameters.Step.Name to get the name of the step failed. You can also use something like Parameters.Step.StepType.Name is 'NI_MultipleNumericLimitTest' to the different types of filter steps.

  To the extent where the string any failure...

  You can check RunState.CallStackDepth to see callers how you deep. Based on this information, you can use RunState.Caller.Caller. (in sequence but of many appellants deep, you are). RunState.Step.Name or. Sequence.Name

  So if the CallStackDepth is 1, you can only use a caller. If it was 2, need to recursively would you use 1 caller and then 2 appellants and so on.

• A summary report of comment with possibility to select script page ranges

  Hi all

  I use Adobe Acrobat X Pro on Windows 7.

  I am a newbie to JavaScript, but were using the following script (in fact found this great forum!) to create a report of summary PDF comment.

  It works fine, but I would like to be able to include a line of code to select only specific page ranges (1-40) as I work with a PDF file with 700 pages and you want to create a report summary of the specific chapters. I tried to insert a code for printing specific pages, but when I used Ctrl + Enter to run the script it would bring just to the top of the print window.

  
  

  Any help would be appreciated.

  Thank you!

  this.syncAnnotScan ();

  var a = this. getAnnots ({nSortBy:ANSB_Page});

  If (a) {}

  var = new Rep Report();

  Rep.size = 1.8;

  Rep.Color = color.blue;

  rep.writeText ("summary of comments to" + this.documentFileName);

  Rep.Color = color.black;

  rep.writeText("");

  Rep.size = 1.2;

  rep.writeText ("Total of" + a.length + "comments in this file");

  rep.writeText("");

  rep.writeText("");

  Rep.Indent (20);

  var msg = '\200 page %s of %s of % s ';

  for (var i = 0; i <.) Length; i ++) {}

  rep.writeText("");

  rep.indent (20);

  rep.writeText (a [i] .silence);

  Rep.Outdent (20);

  }

  var docReport = rep.open ("commentSummary.pdf");

  docReport.info.Title = "summary of comments for" + this.documentFileName;

  }

  You will need to add more terms or to adjust this one, for example, to reach the beach you specified above (note the page numbers in the code are zero-based):

  If (a [i] .page<80 ||="" a.page="">117) continue;

• the custom of VCO report

  Hi all

  I have tried vCops customer relationship.

  Follow the "Custom_Reports_Tech_Note.pdf", I define a sample report on the VM MEM for testing. But it does not work.

  After run "vcops - viewsreports.sh we - describe - report.xml create" error message is:

  [Fatal error] : 3:6: the statement of treatment target matching "[xX] [mM] [he's]" is not allowing... See more [Fatal error]: 3:6: treatment target education matching "[xX] [mM] [he's]" is not allowed.

  org.springframework.beans.factory.BeanCreationException: error creating bean with name 'metricManager' defined in the class path resource [Manager-bean - populateDB.xml]: calling the init method failed; nested exception is java.lang.RuntimeException: org.xml.sax.SAXParseException; lineNumber: 3; columnNumber: 6;                                                       The processing instruction target matching "[xX] [mM] [he's]" is not allowed.

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean (AbstractAutowireCapableBeanFactory.java:1412)

  ....

  And I already add the ' mem key metric | usage_average ".

  Please advise, thank you

  Christophe

  Hi, Alex

  I enclose the XML file

  Thank you!

  Christophe

• Retrieve message to ESXi host Summary tab "Configuration issues."

  Using VMware Perl SDK API, how to get the message of 'Problems of Configuration' tab summary ESXi host?

  For example, I have an ESXi host disconnected from the cluster, and in the summary for this host tab, there 'Problems of Configuration' message "disconnected from esxi_hostname in esx_clustername." "Reason: expired license."

  Is it possible to recover the message above through Perl SDK API? The host is already disconnected from the cluster, not sure if this is possible.

  Yes, you can take a look at the configIssue (http://vijava.sourceforge.net/vSphereAPIDoc/ver5/ReferenceGuide/vim.ManagedEntity.html#configIssue) for the object HostSystem connecting to vCenter, i.e. When this information appears. It contains a table of configuration problems and it is exposed in the API, which means that it can be accessed by using one of our SDKs including the vSphere SDK Perl

• Free space on the PS5000 and host different reports

  Hi guys,.

  I got my hands on a PS5000 a few days ago and am still getting used to it.

  My question is perhaps more approprriate for a Dell forum, but I'll take my chances.

  I just emptied on a volume, making use of svmotion. vCenter reports my LUN vacuum

  but when I check the PS5000, he pointed out that there are still some 160 GB in use.

  It seems that other volumes reported sizes are inconsistent with what ESX reports.

  Any ideas? I tried clear as a disconnect, and refreshing

  See you soon

  Where my question on verification of i/o to the LUN. Pulling up to the LUN, while the host is using is not a good idea.

  Property to true.

  In any case, I'm not sure that there is a command (except esxtop) line to monitor the disk i/o.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Summary report - percentage of successful tests

  Hi all

  I develop a sequence with many steps of pass/fail tests, and I would like to change/simplify the report so that the user could see the percentage

  tests succeed on tests executed together, after the end of the sequence.

  In addition, I would like the report to be displayed in the Excel file.

  I don't have a lot of experience in TS and I don't know where to start.

  Any ideas?

  Thank you very much

  Levi S

  I enclose a simple sequence that displays pass fail statistics in the report.

  I use additional results for report pass and fail. You can change as a result of performance if necessary.

  Please note that the steps to calculate the col and not having results tombstone.

  All results are loaded in the list of locals.result and analysis of the sequence of this variable to determine the pass-fail.

  Some useful links for the customization of the report (excel)

  http://forums.NI.com/T5/NI-TestStand/how-do-i-create-an-Excel-report-from-testand-3-5-using-LabVIEW/...

  http://forums.NI.com/T5/NI-TestStand/how-can-I-customize-my-report-by-TestStand/m-p/2235604/HIGHLIGH...

  I hope this helps.