help with identification of database systems

Similar Questions

• Help with identification code of failure

  My product ID is: G9D66UA #ABA (HP laptop, 15). I dropped this laptop, after which he worked always, but rather fitfully. After a reboot, it came to a blue screen with a message saying it was running the diagnosis and try to solve the problems and said "it may take more than an hour". After approxamately 16 hours, the same blue screen message. I subsequently pressed F2 on startup, ran some tests and the ID of the next failure came to each test ran: can RTTSMG-77K7MS-XD7V6J-60XJ03 someone please tell me what this failure code. Also, what are my repair and above all, options recovery data (unfortunately no recent backup)? Any help understand this failure identification code would be greatly appreciated, EE

  Whenever the short hard drive DST test fails with 24 digits failure ID, which indicates that the hard drive has failed and that needs to be replaced to solve the problem

  This problem could be due to an Application or a driver conflict, virus issues, corruptions of files due to incompatible applications, incorrect judgments, update failures due to conflicts, mounted sudden power so portable, sudden falls etc...

  HP will offer a replacement HDD if the laptop warranty is Active, otherwise you can buy a SATA hard drive in a nearby retail store

  Please make sure that you get at least equal as long as the original one in order to use recovery disks. If you need you can buy a bigger, but not smaller hard drive capacity. For example, if you have a 500 GB hard drive you can improve it to 750 GB hard drive, but not 320 GB hard drive

  Please try the troubleshooting below indicated once the steps:

  Step 01. Remove the battery and unplug the power adapter AC.

  Step 02. Press and hold the power button for more than 30 seconds

  Step 03. Plug the AC power adapter / (leave the battery for now)

  Step 04. Press the power button and check if the unit is operating normally

  If the steps listed above is not enough, then you can try reinstalling the hard disk on your laptop

  If the problem persists again please Contact HP if your HP laptop is under warranty, HP could replace the hard drive and provide recovery media to restore the operating system to factory after the replacement (if you have not yet created recovery disks/USB support)

  Note: Back up all personal data on an external drive if possible. Otherwise, you can connect the HDD defective via SATA USB adapter with another PC or a PC even after replacing the HARD drive & put in place of the operating system and try to copy / retrieve files. You can also check out the link below for additional help

  http://www.WikiHow.com/recover-data-from-the-hard-drive-of-a-dead-laptop

  Please click on the link in order to identify, prevent, diagnose & recover against any failure to drive on HP Portable Hard Drives & Solid State Drives:

  http://h10032.www1.HP.com/CTG/manual/c02876562.PDF

  You can check your warranty here to check the status and click here to order a new hard drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL 84

  Although I am an employee of HP, I speak for myself and not for HP

• Need help with identification card WiFi Acer Aspire V Nitro VN7 - 792G - 79 LX

  I just got an Acer Aspire V Nitro VN7 - 792 G - 79 LX that I bought recently a few days ago. I'm not thrilled with Windows 10, so I installed Windows 7 x 64 on it, instead. I only had a chance, until I had to go to work (I drive a semitrailer tractor for a living, and I am currently on the road), to find Windows 7 drivers for the network Realtek card in it, and I now need to find Windows 7 x 64 drivers for the WiFi card. I need help to identify the make and model of the wireless card that my laptop has, because when I go to the Acer website and enter my serial number, then search for drivers, it lists drivers for WiFi cards of 4 or 5 and 2 different Bluetooth drivers.

  I'm sure that my Nitro V17 has an Atheros WiFi Qualcomm card, and I found the information on another site (no Acer) that my card Atheros WiFi Qualcomm model number is NFA344.

  Anyone can check that it is correct?

  Thank you!

  Yes, sometimes setting Legacy can pose problem hardware/drivers.

  on ACPI\MSFT0101, try this:

  https://Downloadcenter.Intel.com/it/download/23091/Intel-me-9-driver-management-engine-1-5-MB-di-int...

  topic of IUSB3\ROOT_HUB30 & VID_8086 & PID_A12F & REV_0031 & SID_103B1025, try this:

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-control...

  on PCI VEN_8086 & DEV_A170 & SUBSYS_103B1025 & REV_31

  It's the technology Intel (r) Smart Sound but I can't find a driver for windows 7

• Need help with creating a database connection

  Installed SQL Developer with JDK 1.6. When you try to create a database connection, I have encountered this problem.
  
  I/O Exception: The network adapter could not establish a connection
  
  Do I need to download the Oracle database?

  You can also look in installation of Oracle XE.

  It carries a much lighter than the standard (or Enterprise) edition footprint and is free (with some restrictions, that you can read).

  http://www.Oracle.com/technology/software/products/database/XE/htdocs/102xewinsoft.html

• Help with installation of operating system!

  Ok.. I have a Sony Vaio NR series. I bought it in 2007. So I decided to return my laptop to factory settings.  So when I put in the recovery disc, it appears the Vaio Recovery Center. I pressed restore 'C '. The middle of it, it stops and says error 302 and 303, and then my laptop turns off. When I turn on my laptop it says no bone was found in 'c '.  My recommend a friend to install Ubuntu. I have install Ubuntu in my usb flash drive.  But how to install Ubuntu if I lost windows.  OH, I DON'T HAVE MY DRIVE REINSTALLION, MY SISTER BROKE IT

  Hello

  for any question of Ubuntu, ask in the Support of Ubuntu forums on the link below

  http://www.Ubuntu.com/support

  ____________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Need help with HP's ESSENTIAL SYSTEM UPDATES...

  It's my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5039381&LC=en&cc=in&DLC=en&lang=en&tmp_track_link...

  I downloaded this a SIU (which is recommended for my laptop) here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-91749-1&CC=in&DLC=en&LC=en&...

  I downloaded and installed another ESU from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103028-1&CC=in&DLC=en&LC=en...

  This one isn't for my product but after installation I notice a big change my laptop, as on the game Explorer, settings of power etc...

  IS IT ACCEPTABLE TO KEEP THIS SIU?

  Hello

  Yes, it's ok. Second link is you giving access to the latest version.

  What is ESU?

  This package installs Microsoft fixes and improvements for the operating systems Microsoft Windows, in addition to providing other fixes and improvements that are specific to the laptop models. These fixes and improvements are needed to improve the performance of these portable model.

• Help with a problem of Wireless Desktop 800, thank you.

  I have a desktop wireless 800, recently, the keyboard is showing strange behavior as follows;
  1. the left arrow button weighs almost all the time, especially when you try to select text (for example, in word) using Ctrl + Shift + arrow to the left.
  2. the green control led lights when the keyboard is touched against the work surface or slightly harder than usual key and the keyboard stops responding for a few seconds until the light turns off.

  Seriously, I would not have taken the trouble you with this kind of a questions unless it is very annoying because all my work is related to Microsoft word and excel, and I really wanted the entire web for a sufficient answer, but in vain. Hope you can help me. Your time and efforts are deeply appreciated, thank you in advance for your help.

  Dr. Ahmed

  Hello

  To help you better, please answer these questions.

  1. have you tried to use the keyboard on the other computer?

  2 did you do changes on the computer before the show?

  Based on the description of your problem, it seems that the problem is related to hardware. Since you mentioned that you have recently purchased Microsoft Wireless Desktop 800, I suggest you to contact the Microsoft Hardware support for assistance.

  http://www.Microsoft.com/hardware/en-in/support

  However, you can read these articles Microsoft and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Need help with using MSN, called Khamtechnologies or Procomsupport247 for assistance.

  Original title: technical support

  Someone had agreements with Khamtechnologies or Procomsupport247?  My wife called the number of MSN support and getting first Khamtechnologies, then more recently Procomsupport247.  Procomsupport247 has done Khamtechnologies bankruptcy and that they were the new people tech for MSN.  The two companies have charged us for their technical support.  They want only to sign up for a multi year service contract.  SER these scams?  Any help would be appreciated.

  Hi WebbyDoo,

  The support that you have contacted seems to be a third party support. I suggest you refer to the Microsoft article below for more information about the calls of the scam and how to avoid the scam calls.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  I suggest you refer to the Microsoft Support article to know how to contact support MSN to better help.

  How to contact MSN customer service:

  http://support.Microsoft.com/kb/940784/en-us

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside...

  After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside... need help pls

  PS noticed the update downloaded twice

  disregard my previous question... I found the answer: F1, F2 has been ticked on.

• I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  I have a Dell computer with a Vista operating system. My dell dock will charge is no longer. Help?

  All download Dell Dock and see if that fixes the problems.

  http://DellDock.com/

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Problem with the help of oraext: query-database in the transformation (XSLT 2.0)

  Hello!
  I m facing a problem with the help of oraext: query-database.
  
  In my transformation im try the following (Simplified):
  

  <xsl:template match="*">
    <xsl:variable sqlQuery="select ....."/>
    <xsl:variable name="storeSec" select="oraext:query-database($sqlQuery,true(),true(),'jdbc/xref')/>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>
  {code}
  
  This always results in +some+ +other+ +val+ !!
  I´v checked the output from oraext:query-database by using getcontentAsString and if I instead test putting the expected output from oraext:queryDatabase in my variable it gives me A100 which is what i expected.
  
  {code}
  <xsl:template match="*">
    <xsl:variable sqlQuery=select ....."/>
    <xsl:variable name="storeSec">
      <ROWSET>
       <ROW num="1">
         <STORE_PART_SECTION>A100</STORE_PART_SECTION>
       </ROW>
       <ROW num="2">
         <STORE_PART_SECTION>XXm</STORE_PART_SECTION>
       </ROW>
      </ROWSET>
    </xsl:variable>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>

  How to get the correct value when you use oraext:query - database?

  How should you exit? Several item ID with each having a value of the result set?
  If Yes, then you can try following:

• PLEEEEZE... Help with specing on a new PC, NTSC system CS5.5 (links included)

  Help with specing on a new PC NTSC with CS5.5 Master Suite. Windows 7, 64 bit. Will be used mainly for PP & still, some AFX & PS. editing a lot of avchd! Calendar usually between 1 1/2 to 2 hours in length, 2 or 3 LAYERS.

  I've seen the benchmark page but found very confusing. I also read the forum reading many posts similar but found submerged :-)

  KEY CONCERNS: Not sure, the choice of the video card or whether to go 6 core. I don't want to spend much more, unless I need to.  Ideally I would like to put all THE project files on the DRIVE 2 Raid 0 without divide them upward on separate drives. I'll be able with such a system?

  PROCESSOR: Intel Core i7-960 3.2 GHz LGA 1366 converted (boxed) SKU:275222 $199.99 boxed processor (I could go octacore, don't know yet)

  http://www.microcenter.com/single_product_results.phtml?product_id=0330706

  Or should I go 6 octo core? : $594^.99

  http://www.Newegg.com/product/product.aspx?item=N82E16819115066

  VIDEO card: Zotac ZT-40201-10 P GTX 470 1280 MB GDDR5 PCIe 2.0 x SKU: 838375 ((IS THIS THE BEST CHOICE?)) $200.00
  

  http://www.microcenter.com/single_product_results.phtml?product_id=0342176

  24 GIG RAM: Kingston HyperX memory 4GB 240-pin DDR3 SDRAM DDR3 1600 desktop

  http://www.Newegg.com/product/product.aspx?item=N82E16820104244 $186,00

  SYSTEM DRIVE: Western Digital VelociRaptor WD3000HLFS 300 GB 10 000 rpm 16 MB http://www.newegg.com/Product/Product.aspx?Item=N82E16822136322 $149.99

  VIDEO PLAYERS: 2 DISCS VIDEO software RAID 0: Seagate sata 6.0 3TO http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215 x 2

  Dump of disk: Seagate sata 6.0 3TO 1 http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215.00

  Motherboard: ASUS Sabertooth X 58 Intel LGA 1366 X 58 SATA 6 GB/s USB 3.0 ATX Intel MB http://www.newegg.com/Product/Product.aspx?item=N82E16813131665

  BLURAY BURNER: Pioneer black Blu - ray burner SATA BDR-206DBKS http://www.newegg.com/Product/Product.aspx?Item=N82E16827129066 & Tpk = BDR-206DBKS $109

  : COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP black steel ATX full Tower Compucase case with USB 3.0 and inner black http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160 & cm_re = 2-_-11-119-160-_-Product COOLER_MASTER_HAF_93

  $154,48

  Power SUPPLY: Thermaltake Black Widow W0319RU 850W ATX http://www.newegg.com/Product/Product.aspx?Item=N82E16817153106

  $129.99

  1 Yes

  2. 4 GB. DDR3-1600 + in a bag to hex or 2 packs of sorting of the brand and the desired model.

  3. why not get the new GTX 570 or 580? They are more silent and cooler.

• PHP, help with the site of the legacy database

  Hope someone can help with this, although I might be a little vague. (But will be happy to post any code which may help.)

  Basically, I'm doing a few sites for a company, and everything comes together nicely any movement towards a new reseller hosting account where all can site. Basically, I'm doing some redesign and new work of database for them.

  But there is a site that I am basically just try to hover over, which already has a database. I copied the site on the new hosting, copied from the database through and created a new connection file.

  I admit that the code is all PHPO a little heavier than what I am used to working with. If you have encountered a problem trying to understand what data is not displayed due to failure of queries. I can say that the connection is working, and queries have not changed.

  In any case - the homepage is here, where you should be able to click on the images of furniture to go to the product page:

  http://www.miradatravelmedia.com/lusty/public_html/index.php

  But when you click on through the product page request fails:

  http://www.miradatravelmedia.com/lusty/public_html/products.php?category=1

  The products page is mainly PHP and looks like this:

  [PHP] <? PHP

  If (! @empty($_REQUEST["img"])) {}

  require_once("..) ("/ includes/hft_image.php");

  $img = new hft_image($_REQUEST["img"]);

  $img-> resize(200,180,"-");

  $img-> output_resized("");

  "exit";

  }

  $page = "products";

  include("..) ("/ includes/header.php ');

  include("..) ("/ includes/db_open.php");

  $sql = "SELECT 'id', 'name', 'CATEGORIES' WHERE 'id' = '. $_REQUEST ['category']. "'";

  $result = mysql_query ($sql) or die ("failed query: $sql to the line". "") __LINE__);

  $category = mysql_fetch_assoc ($result);

  ? >

  < div id = "trail" > < a href = "shop.php" > shop < /a > & gt; "" Lloyd Loom <? PHP echo $category ['name']? > < / div >

  < div class = "clear" id = "divider1" > < img src = "images/spacer.gif" alt ="<? PHP echo keyword()? ">" / > < / div >

  Lloyd Loom < h1 > <? PHP echo $category ['name']? > < / h1 >

  <? PHP

  $sql =

  "SELECT *". "."

  ""PRODUCTS.

  "WHERE"category"= '". $_REQUEST ['category']. "' " .

  ' ORDER BY 'order ';

  $result = mysql_query ($sql) or die ("failed query: $sql to the line". "") __LINE__);

  If (mysql_num_rows == 0) {}

  ? >

  < p > to come... < /p >

  <? PHP

  } else {}

  $n = 0;

  While ($row = {mysql_fetch_assoc ($result))}

  $n++;

  ? >

  < a href = "product.php? id = <?" PHP echo $row ['id']? ">" class = 'product' <? "php if ($n == mysql_num_rows ($result)) echo" id =-'last\' "?" > >

  <? PHP

  If ($file = glob ("images/products / '. '")) $row ["id"]. "_*.*")) {

  ? >

  < img src = "img.php? img = <?" PHP echo $file [0]? > & width = 200 & height = 180 "alt =" <? " PHP echo $row ['code']? ">" / >

  <? PHP

  } else {}

  ? >

  < div id = "no_image" > no image found < / div >

  <? PHP

  }

  ? >

  <? PHP echo $row ['code']? >

  < /a >

  <? PHP

  If (is_int($n / 4)) {}

  ? >

  < div class = "clear" > < img src = "images/spacer.gif" alt ="<? PHP echo keyword()? ">" / > < / div >

  <? PHP

  }

  }

  }

  ? >

  < div class = "clear" id = "divider2" > < img src = "images/spacer.gif" alt ="<? PHP echo keyword()? ">" / > < / div >

  <? PHP

  include("..) ("/ includes/footer.php ');

  ? > [PHP]

  If someone could shed some light on what goes wrong again, that would be much appreciated.

  Thank you.

  Iain71 wrote:

  OK - changed the line of the query and get the error message: no database selected...

  The answer lies in the connection of database script, db_open.php. There should be a call somewhere to mysql_select_db().