AMD radeon driver of hp on the latest kernel?

Hi all

(Note: my experience with linux is modest, but I'm willing to learn a few tricks and configuration from the command line.) I am familiar with the command-line of daily use)

I recently installed SP1 SLED11 and updated the system through Yast Online Update. My current kernel is so 2.6.32.36 - 0.5 - default. My system is a HP Probook 6560 b, with an AMD HD 6470 M card.

I think I have a problem with the graphics card driver, because:
-Yast > graphics card utility tells me I have a framebuffer VESA, not AMD graphics. »
-the control center > display is not working properly: the monitor is marked 'unknown', and neither resolution, refresh or rotational frequency is adjustable.
- But my screen with good resolution (1600 x 900).

HP now provides a driver for my graphics built for SUSE Linux:

HP ProBook 6560 b Notebook PC *-* AMD Radeon HD 6470M for Linux SUSE Novell SLED 11 SP1 (2.6.32.27 - 0 K...,)

However, it is built for the kernel 2.6.32.27 - 0, while my kernel is 2.6.332.36 - 0.5, as shown above.

My question is: if I can install this driver or it will fail because of incompatibility of nucleus?

Concerning
Andreas Hauge

It is said that there is a graphics driver that is already installed. Ok..

EndSection

SectionDevic

BoardName "Framebuffer Graphics.

Pilot "fbdev".

Identifier "Device [0].

Screen 0

VendorName "VESA".

Rename the driver means that you rename the driver in this section. I don't know why, but sometimes when you install a graphics driver, it does not change the xorg.conf file and you need to configure it yourself.

Rename the driver should look like this:

EndSection

SectionDevic

BoardName "Framebuffer Graphics.

Driver "radeon".

Identifier "Device [0].

Screen 0

VendorName "VESA".

or

EndSection

SectionDevic

BoardName "Framebuffer Graphics.

Driver "radeonhd".

Identifier "Device [0].

Screen 0

VendorName "VESA".

Restart and see what happens. Try the two options. If the driver already installed is ok, this can work. I would ask recovery disks or use a different linux...

Tags: Notebooks

Similar Questions

  • Satellite C855 1JD Amd Radeon driver

    Hello

    When I turned on my computer this morning I received this message:
    «The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated.» Please update your graphics driver from AMD, or activate your card AMD using the display manager.

    My graphics card is a Radeon AMD HD 7610 M
    Any help is greatly appreciated!

    Thank you much in advance.

    Try to uninstall the ATI graphics card driver which is pre-installed on your device.

    Then, visit the Toshiba UE driver page and download the latest driver available GPU ATI/AMD.

    Once installation is complete, reboot the laptop and check the functionality.

  • HP 2000 - 2b19WM Notebook PC: AMD graphic Driver fails repeatedly, and the PC often restarts itself...

    I bought this laptop a few months, put it away in a corner and when is it coming out my old laptop broke. I got it at low cost, was handed to nine Windows 8 PC, I've updated to 8.1 in early December. I use this laptop heavily, I watch a lot of videos, and I kept meeting my good old friend, the green of death. I was familiar with it, that the pilot had failed several times on my other laptop as he grew older. However, this error occurs repeatedly. I'll see that I've got the greenscreen, I'll go to my office and opened to the top of the screen with all the drivers listed, click on the display of the maps section and open the graphical part of AMD. I'll click Update driver in the second tab to search for updated drivers. Each time on what he tells me that he has that no update, so I'll be back with the graphical part of AMD, click Update again and, this time, search the drivers already installed on my laptop. Currently, there are 2 AMD drivers available, both the AMD Radeon HD 6310 versions, one starting with a 12 and the other starting with a 13. No matter which version I coose, both only work for a few hours before I have to redo the procees.

    ALSO, sometimes after update the graphics drivers, my laptop with just close and restart. He will sit on page load with the HP logo and the circle with doing the loading circle, but the page with disappear and appear again and do exactly the same thing. On several occasions. Finally, a blue screen appears which says I need to restore my laptop and the previous version. I click on the button to do it, and the screen returns to the page from loading except now, it not there no circle loading, just the HP logo. He's sitting like that for about 20-30 minutes before a blue screen appears stating that the laptop could not restore to the earleir version, and there is a button Advanced Options on the Advanced Options page there is a button that says exit and go from 8.1 to Windows, so I click on that and the computer restarts normally and I can use my laptop again.

    SO I need someone to tell me how to stop the repeated appearance of greenscreen and (hopefully) tell me how to stop my computer to reboot (it did its shenanigan last night, and when I finally got my computer back to the start screen, my Word documents had disappeared completely. I even tried to restore all thatword documents recorded due to the closure forced the document, but nada for me) I'm afraid that I'll lose even more work and time to these problems, and I hope that someone can help me.

    Hi @SabrinaS,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your 2b10wm of 2000 HP Notebook PCs and laptops having problems with restore points. Two graphics drivers that you see listed and you restart the portable computer to uninstall.

    Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

    Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    Here is a document on assistance with the computer does not start. It gives you instructions step by step when you see the HP Logo screen.

    What happens when you play a DVD?

    What browser do you use? Here is a site that will check if your update.

    Please let me know.

    Thank you.

  • AMD Radeon HD 6990 compatible with HP p7-1245 diamond? AMD Radeon HD 7450 Crossfire is the best?

    I play SWTOR with 25 mb internet and can't play on the spot. Just try to solve the problem of graphics agitated with the AMD Radeon HD 7450 card provided with the desktop HP p7 1245. Wouldn't be better to go with a configuration Crossfire or more powerful card like the diamond AMD Radeon HD 6990 or higher?

    Your system won't "Crossfire", "Hybrid Crossfire" or 'Dual AMD graphics card'... whatever you want to call. Only, the system has a PCIe x 16 location and uses Intel GMA on board. Here are the specifications of your desktop HP Pavilion p7-1245. According to specifications, your system has a 300 Watt power supply. To install anything but a low range graphics card, you'll need to replace the power supply. The Corsair CX500 and CX600 are highly recommended and favorite forum. For more information and advice please see Guide of Big_Dave for the selection of a discrete video card.

    Frank

  • Video driver not updated to the latest version... Troubleshooting help please...

    Hello and good day, group... We have here a few CQ4010F desktop computers. I pushed recently updated Windows and a PC (1PWC) now has a video driver to version less about that. The PC I compare (0SDQ) is great for video with full 1920 x 1080 is available and Acer E211H monitor display. For PC with the issue, the resolution will not be max (stuck @ 1600) and the screen credits. The goal is to get (1PWC) to the full resolution and correct monitor please.

    Here are the specs for the two because both machines are the same for the Prod #:

    Models: CQ4010F, ABA-Prod #NY650AA, stock video NVIDIA GeForce 6150SE nForce 430, stock charge RAM 4 GB, 64-bit, SP1 Win7 (after windows updates)...

    I compared the pilots, and they do not match when comparing machines:

    -(1PWC); NVIDIA, on 14/05/2009, version 8.15.11.8593, signed MS Windows

    -(0SDQ); NVIDIA, 01/04/2010 (new date), version 8.17.11.9739 (latest version), have signed MS Windows HW compatibility Publisher<--- want="" please!!!="">

    I can not get the most recent driver to load on the PC with the question. I pushed for troubleshooting updates driver Windows on (1PWC) several times. All say that the driver is updated? I did a driver update... process also with the reporting of the pilot system is running when it is not.  I went to the site of NVidia and NVidia driver downloads tell me that the correct driver is installed, when it is not. Interesting java Nvidia GPU playback tool said unknown to the GPU video about the PC card product? The 'good' PC reports the right product analysis offshore GPU and offers even update a more current Nvidia driver. I as well before it is rip out together video driver and loads a basic 640 x 480 driver, then start in safe mode and reload the driver proper. But I don't know if I did the steps correct basic video driver load correction method.

    Hope it was not too verbose. I am running "on this feedback rabbit hole an and any circular or troubleshooting tips would be great. Be advised that it is the PC with the southbridge NVIDIA North/South wobbly mobo that also has problems of USB.

    Thank you-

    /WF

    Hello GPS-Tech,

    Because the tool indicates the video card as being unknown, that it does not find a driver to update because he does not know what to look for, as well as update microsoft assumes that the driver is up to date because it has no idea of this driver to get.

    Your best option is to manually install the driver by accessing the site Web of NVIDIA manually by lifting the video card and the driver installation.

    I think it's the right driver
    http://goo.GL/67li4

  • USB 2.0 drives not recognized since the latest Windows updates

    I tried 4 different USB 2.0 on 4 different and no computers drives won't recognize readers for the latest Automatic updates.

    1 PC with Win 7 64-bit all service packs

    2 computer laptop w / Win 7 32 bit all service packs

    3 laptop w / Win 7 64-bit all service packs

    4 desktop w / Win XP Pro 32 bit all service packs

    All versions are professional, all devices are fully patched and recognise the mouse USB, HD', other USB devices.

    3 of the flash drives are Sandisk Ultra USB 16 GB sticks, one is nine of its packaging.

    1 is a 8 GB generic to Symantec given as a promo, but it is brand new.

    All these discs worked in these devices before the last major thrust of update.

    There is no splat / exclamations in the Device Manager.

    If all the USB controllers are removed and reinstalled, it does not address the issue.

    Difficulty of MS it detects no problem.

    USB 1.0 drives work!

    None of these devices are equipped with USB 3.0 ports

    Hi Laurence,.

    Please keep us updated on the status of the issue and apologize for the lack of communication.

    As you mentioned that this problem occurred after installing Windows updates, then I would suggest you to restore your computer to a restore point that was created before the date and time when you started to notice the problem.

    To do this, please follow the steps from the following link:

    Restore system files and settings

    Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    After restoring the system, try to manually install the Windows updates (try to install one by one) to identify what update caused this problem.

    To do this, please follow the steps from the following link:

    Install Windows updates in Windows 7

    Hope this information helps.

    Please reply with the results, in order to help you solve the problem.

    Thank you

  • Why sovereign funds on my hard drive do not use the latest version of Flash Player?

    I've looked everywhere and I don't know why no one seems to be talking about this.

    When I view a SWF in a browser it uses Flash Player 11.6, but when I view a SWF file on my HDD it uses Flash Player 10. Why is this? It's driving me crazy.

    Untitled-1.jpg

    I already know that Chrome uses several different Flash players. One of them is the built-in Flash Player and the other is the 'system' Flash Player. I assumed that the Flash Player system is one that is running when I opened the SWF file on my hard drive, but this is clearly not the case. I tried to uninstall Flash Player and I could always open the SWF file on my hard drive and they always said Flash Player 10. What happens here? How many players Flash do I? Looks like there is a Flash of Chrome's built-in drive, a system of Flash Player AND a Flash Player that is used for the execution of the SWF file on my hard drive.

    I am running Windows XP and I have the latest version of Flash Player. I know because I was installing it again and again trying to solve this problem.

    The standalone version of Flash Player (projector) is not updated with the Flash Player browser add-ons; You must download the latest standalone player manually http://www.adobe.com/support/flashplayer/downloads.html

  • Skype crashing my computer with the latest AMD drivers.

    If I have a small problem:

    I built a new computer for all the facilities (including Windows) are new.

    Skype starts very well.

    Once I received or launch a call, my monitor no longer responds, and the only way to regain control is to reset my computer hard. Meanwhile, I can still hear the noise (noise of incoming call, for example.)

    To resolve this problem, I have:

    Updated all my drivers.

    Updated my BIOS.

    Uninstalled AMD Catalyst Control Center and drivers.

    Reinstalled AMD Catalyst Control Center and drivers.

    Skype worked fine once the CCC AMD and pilots have been uninstalled.

    The reocurred of problem after reinstallation.

    Attached is my dxdiag - I would appreciate it if someone more competent on the subject could weigh.

    Thank you very much.

    Try to restore your driver AMD Radeon R7 200 Series to the 14.10.1006 previous version:

    http://support.AMD.com/en-us/download/desktop/previous/detail?OS=Windows%207%20-%2064&Rev=14.4

  • AMD Radeon HD 8670 M (1 GB DDR3 dedicated memory) - driver

    Hello

    We recently purchased number of HP Pavilion n037tx-15 Notebook Laptop PC (product: f3z86pa) for our company, because of the non-familiarites with windows 8 new end-user interface, we had planned to go with windows 7 Professional x 64 edition (which is not recommend HP)

    Problem:

    I couldn't find the driver AMD Radeon HD 8670 m at first, but after reading some messages and research I found I should try amd_catalyst_13.11_mobility_betav9.5 driver available on the website of AMD.

    http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2064

    After installation, the yellow exclamation sign exploded of the video controller in Manager device, but when I open the graphics card I found AMD Radeon HD M 8600 Series with the sign of the yellow exclamation point.

    A glimpse of it is attached.

    I don't know the video driver installed correctly or not?

    I'll appreciate your help please.

    Thank you

    Thanks for your time and your answer, finally we have upgraded our systems to Windows 8, sp62664 is the right for our AMD Radeon driver which works only with Windows 8 x 64 bit.

    Thank you

  • Increase the resolution on the ProBook s 4540 with AMD Radeon 7650 M

    I have a ProBook s 4540 with the AMD Radeon 7650 M card.  The graphics card and drivers are up to date with the latest settings on Win7 Pro 64 bit machine.  I installed the I want to know if I can increase the native resolution of the Catalyst Control Center installed and switchable graphics on in BIOS (F.40).

    I use my machine for graphic design & website and you want to increase the native resolution of 1366 x 768 setting above.  I know that the CCC will allow you to change performance for games and other programs, but I'm looking for the resolution.  The Basic setting for my office lists only the graphics card Intel for the resolution settings.

    It left me speechless.

    Thank you!

    Figured it out for anyone who needs help with this.

    Resolution max screen 1366 x 768 even if the video card will support more resolution, it cannot for the screen built in on the laptop, only for screens outside.

  • Error: "Hardware accelerator is disabled or not supported by your video make sure card driver you that you have the latest video card driver installed and the accelerator is running.

    Original title: Solitaire stop working right after the update to download

    This slowed the game.  I checked the video card is correct, and hardware accelerator says it's working properly.  This started after I downloaded two optional updates, one of them KB968930.  I uninstalled both of them and tried to restore the system with no result. the rest of the message is "Hardware accelerator is disabled rooms or not supported by your video make sure card driver that you install the latest video card driver and the accelerator is turned on."  I checked these things.

    Thanks for the help.  I had fixed to date through the tool and the info of the performance.  Find where it says new hardware installed, click on repair, I did and it worked.  I don't know what caused the problem, but my game index had fallen to 1 and came back up to 3.3.  Thanks for the help. P. W. O'Malley

  • How to fix the error of the AMD graphics driver in windows 8

    H! everyone
    I bought a laptop (Dell inspiron 15R-5521) with windows 8 is already installed on here is the error message I get little from time to time.

    No AMD graphics driver is installed; or the drver AMD does not work properly. Please install the driver APPROPRIATE for your AMD hardware.

    Please any ideas how to fix?

    Can occur in Device Manager

    I don't want to update or reinstall the driver appropriate AMD graphics.

    http://downloads.Dell.com/pages/drivers/Inspiron-15R-5521.html

  • DELL, please update AMD video driver

    Hi, Dell.

    My laptop is Dell 3537 with 8850 M graphics from AMD.

    Update the driver for the windows of 8850M AMD 8.1, because the driver on the site is very old and gives a little FPS in games and AMD driver (13.12/13.11) causes problems with the mode 'sleep' and the screen turns off: the screen turns black and does not illuminate.

    I found the solution in an older topic. I couldn't believe that it works. Now I know where is the problem.

    !!! LATEST INTEL DRIVER (10.18.10.3308, A01) VIDEO DOES NOT WORK WITH THE LATEST DRIVER AMD (13.151.0.0, A00) - IT IS A PROBLEM FOR WHICH HD8850M DOES NOT WORK!

    Here are my instructions changed to Perrygogas:

    1. upgrade the BIOS A06.

    2 download (do not install again) drivers for Windows 8.1 DELL (not manufacturers) of the x 2 and x 2 Chipset site are displayed. The ones of the image as an attachment. All the drivers are the latest version expect for the Intel video driver - you have to download the PREVIOUS VERSION (10.18.10.3277, A00), that works perfectly.

    3 uninstall the Intel video driver and all AMD Catalyst software. You can use "Display Driver Uninstaller" in safe MODE - it is really good, simple and free program.

    4 reboot the laptop.

    5. install all the drivers EXCEPT for VIDEO_AMD - the first condition in the picture above.

    6. restart the laptop.

    7. check if the device of AMD is still uninstalled (in programs and features), otherwise proceed to step 3.

    8. install the driver "Video_AMD"... ». This is the driver for AMD Radeon 8800 M and above the first condition in the image.

    9 restart the laptop.

    10. graphic AMD should now work.

  • Intel Hd 4000 + AMD Radeon HD7670 advantage

    Hello

    I haave recently bought a hp envy laptop 6, he has an incredible and amazing, but I had some problems to update my graphic drivers.

    Whenever I update my AMD driver, my driver Intel HD 4000 downgrades automatically and vice versa.

    I recently just upgraded them both, and yet my AMD radeon is not currently within the most recent update (there is a new update, and I'm afraid I'll downgrade my Intel Hd 4000 and not be able to restore it again), I'm sure that many have had this problem before.

    In addition, it came to my mind that there is no system settings advanced on the BIOS, I intend to increase my dedicated video memory (MORE memory graphics for games) using advanced on the BIOS, system settings but this option is not found, as always, any help would be appretiated.

    Thank you.

    P.S: Hardware Hp are fascinating, but my ONLY hating on computers laptops (usually laptops) is the low GHz, with 5.9 side my laptop is incredible, and yet the 1.7 GHz is a disadvantage, once again your products are amazing, Dungeon it upward and give overheating issues a notice.

    Thank you. Great job, keep it up.

    Hello

    ATI/Intel switchable graphics can simply due to the fact that you need a custom installation and a version of the CCC to control problems.

    The latest version of the HP that should work correctly is on the corresponding link below.

    AMD/Intel switchable graphics installer - Windows 7.

    AMD/Intel switchable graphics installer - Windows 8.

    As I mentioned before, you might well become better performance (and latest driver versions) using the 3rd party provider on the following link, but with the disadvantage of having to disable driver signature enforcement to allow these drivers to be loaded.

    http://leshcatlabs.NET/

    Kind regards

    DP - K

  • The ATI driver installation cannot find the previous installation?

    Hello

    Yestreday, I wanted to update my current graphics driver AMD high definition and so downloaded the latest version. Before installation, the installation wizard stated that no previous directory was found and would create a new. That didn't make much sense to me, as I already had the previous version of the driver on my laptop. After a bit of research, I realized that the previous version was installed in the program (x 86), and the new system would be installed in Program Files instead

    My question is; I still want to update the driver and how do I go about this? Must delete the existing one and install the new drivers?

    My laptop model is dv7 - 4198ca with ATI Radeon HD 5470 Switchable Graphics.

    Thanks in advance.

    I have a laptop different but the same 5470 video card. Update all video pilots made me a lot of problems, I had to restore a former win7 restore point to get the Panel to catalyst and switchable graphics to work again.

    During the update, I was warned with the same message as you (no previous directory).

    I suggest, if you dare, to update the drivers ONLY (for version 1.771 I guess) choose updated manual and then uncheck the other characteristics (catalyst, frame MS C++, etc). I also suggest you to create a manual restore point before starting.

Maybe you are looking for