Help with rotation symbol and address at the top left

I want to be able to turn a symbol on the center of my choice (or even the center of the image/symbol), but retain the upper left corner as 0,0. Is this possible? It seems that I may have only one or the other.

My project is an image (inside a MovieClip symbol) which moves and rotates according to the direction of travel. Only problem, it's funny. And then when I Center/adjust the rotation of the image inside the symbol, its origin is no longer in the same place, and I have to give additional numbers to compensate for. I guess the reticle is (0,0) as well as the central point or rotation. I'm fine with this being (0,0), but how can I move the rotation/pivot also point? I tried to use the free transform tool to move the white dot in the Center, but little success.

Any tips? Thank you!

AFAIK, you must choose one or the other.  If centered rotation is important, then Center your 0,0 and use the compensation values if you need to locate the top-left corner moving ever.

I don't know if the loading of the moiveclip in an empty movieclip can offer a solution that you want to or not.  You can rotate the movieclip centered inside and use the movieclip containing the x / values there.  It might be interesting to play with and see what happens.

Tags: Adobe Animate

Similar Questions

  • Black screen with a white flashing dashboard on the top left corner

    I try to use the recovery disks (four in total). I put the first disc in and it ran on F11 and it ran, then he asked me to assess extra and who ran very well. Then he asked for 1 system recovery disc and that went very well, last she asked me to put in disc 2 of the system recovery and all I got was a black screen with a related flashing on the top left corner of the screen and it did not run. So now I'm stuck, and the disk 2 and 3 did not perform. Help! I really don't want to spend three hours on the phone with HP. I have a HPE-470F, Windows 7

    I hope we can get it worked. Normally you do not press F11 when you use recovery discs. Not sure, but you may have triggered a step wrong using it.

    Follow the instructions here closely again with an attempt to recover:

    http://support.HP.com/us-en/document/c01867418

    Also as Dokie says-good luck! Let us know how it goes.

  • UP3214Q REV02 - all windows resized to 1024 x 786 and moved to the top left after the power monitor cycle

    Hello

    I recently got a model REV02 my REV01 developed a fault. However, it seems as if these screens maintain their unwilligness to allow us to save energy by turning off the screen when you need a bathroom, coffee break or something else. Whenever you turn off the screen, then turn on again (be it a few seconds later, or minutes to hours later), all open windows will be resized to 1024 x 786 pixels and placed in the upper left corner of the screen.

    This happens on the Intel cards and nVidia (GTX780TI on 347.52, intel Hd4400 on 15.36.14.4080 drivers drivers). I went throug the playbook together to offer the GFX card, so reset screen, remove the drivers with uninstalling the driver and perform a drive clean reinstall, and swapping the cables (I have a bunch of cables apprived dell when they initially did not want to send me an A01 to set half of the image & had the A00 sleep problems). Happens DP1.1 and DP1.2 mode, and it happens 10 times out of 10.

    Anyone with a UP3214Q who sees this behavior as well? BTW, this is my 3rd unit of REVA02, they all exhibit the same behavior (exchanges were not made because of that, but it confirms that the problem is not related to a defective unit).

    See you soon

    It is a common problem among the monitors UHD, a lot of posts here about it - they take longer to wake up causing the driver GFX their definition to a safe lower resolution before them at their native resolution. The latest 14.2 AMD drivers seek to correct this problem, and you will probably see the same kind of difficulty in the future of the drivers from NVidia and Intel.

    In the meantime, if you use Dell Display Manager (DDM) and are comfortable editing the registry, try to add the "RestoreWindowLayout" value to HKEY_CURRENT_USER\Software\EnTech\DDM and set it to 1 (dword).

    You will need to have the latest version of DDM (b.1554) for this to work; Hold down the SHIFT key while right-clicking on the DDM notification icon and select "Check for new version" in the context menu.

  • T61 symbol of padlock in the top left corner? No access to anything.

    Well if I had a fan error I took the laptop part to clean the fan it worked "I think" a lock now appears in the upper left corner with another symbol next to it that looks like a computer but its so small I can't tell if it is there anyway to work around this problem if not so it is not my job is at stake and with this economy , according to me, I could just jump off a bridge after talking with my psychiatrist of course I changed my mine... Any ideas email me as soon as POSSIBLE! I have no time to watse. So let me tell you what I tried I tried the ESC key after the start to different choice of start and and I also tried F8 I tried F12... idk why and I tried the "Fn" key with the symbol of locking on my keybooard to see what who would do that I don't know what else to do with just another hard drive " , 2 (2 GB, 1 GB) of ram and the tools to disassemble the laptop. I would be so happy to know that I won't have to spend money on this machine cuz I'm in the negetives here, barely alive... help me or im outta the image for good, to be honest this laptop is my life and it has everything I need on it to succeed in the near future as well as many costly programs that could make or break me. Jeez im desperate that right now this is, I googled until I was going to pick up this desktop computer to this library and smash it and walk out like nothing happened even.

    Just to let you know, there is no way to remove a password from the bios, the motherboard would need to be replaced if you do not have the password.

    Discussions on hacking or other methods of bypassing this security feature are not allowed in the forum.

  • need help with nero kwik dvd burner to the top and running.new nget computer appreciate any help

    new computer, need help for nero dvd borning kwik place and ongoing, as if I wanted to get stuff for my grandchildren, any help really appreciated. Thank you

    http://www.Softpedia.com/get/portable-software/CD-DVD-tools/Windows-portable-applications-portable-AmoK-CD-DVD-burning.shtml

  • Solitare opens suddenly, with cards staked in a stack to the top left corner. I was not able to detach them to play a game. Help!

    Solitare opens suddenly, with cards staked in a stack to the top left corner.  I was not able to detach them to play a game.  Help!

    Hi Perren7,

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    2. type the following command and press ENTER:

    sfc/scannow

    3. the sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    If that is not enough then try to create a new user account and check what is happening. To create a new user account

    1. to open user accounts, click the Start button, select Control Panel, click user accounts and parental control, and then click user accounts.

    2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. click on create a new account.

    4. type the name you want to assign to the user account, click an account type, and then click on create an account.

    If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a laptop 425 HP with windows 7 and I lost the sound on the computer built-in Laptop speakers.

    I have a laptop 425 HP with windows 7 and I lost the sound on the computer built-in Laptop speakers. I have sound in my headphones. Windows troubleshooting has not contributed so far.

    My laptop is 30 days

    Hello

    • You did recently change software to the computer?
    • What is the brand and the model number of the sound card?


    Method 1.

    Follow the procedure step by step in the article below and check.
    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Method 2.

    If the problem persists, follow the steps listed in the article below and check. http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    It will be useful. Let us know for help.

  • Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

    Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

    Hello

    Thanks for the quick response.

    What web browser do you use to access the links in my previous post?

    If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.

     

     

     

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/ro

     

    Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

     

    If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • I have an I7 of Satellite A505 and it came with home premium and I did the anytime upgrade to Win 7 Pro

    My Toshiba create multimedia tool repair does not work.  I have an I7 of Satellite A505 and it came with home premium and I did the anytime upgrade to Win 7 Pro, I want to try to download an .iso in Windows 7 Pro and do a fresh install.

    I have the upgrade button.  I wonder if I should first download Home premium, it came with and then download the pro, I have two keys, I don't drive and Dosen t Toshiba tool work.  T have to find the way.  any help will be appreciated

    So if I understand correctly, I charge Home premium, then simply use the upgrade key and it will unlock win Pro, or I have to download pro then install it on Home Premium and use the key?

    YES! As Andre also noted. You must activate Home Premium with his first touch, then simply use the key to upgrade Express to go Pro. Pro is already part of Home Premium and the key to upgrade Express just unlocks.

    Also, thank you for your help!

  • A little black box appears at the top left of my Windows 7 login screen just before the Welcome screen and the stalls password when I try to enter. HELP PLEASE?

    Whenever I turn on my computer for a week, I try and put my password and after the first or the second key it stalls. He again entered my password, but I don't see whether registration in the password box. I also have a little black box that is slightly smaller than the size of a post-it note in the top left area of my screen for half a second, then it disappears and continues to my home screen and office as usual.

    I had this problem for about a week, and I can't understand what is the problem. I googled some things, but no one had the right answer. Someone said it was a startup with a defective software program, but I checked and I have the same 4 startup programs I've had there for a year. (DELL Wiireless WLAN Card, IDT PC Audio, Synaptics Pointing Device Driver and NVIDIA Compatible Windows 7 display driver) Everything is up-to-date and I already have Windows Update.

    * A video that I captured from my computer of this problem: http://www.YouTube.com/watch?v=GViQv-Xrm0U 

    (password stops around 0:42 and black appears at 0:52)

    Someone help? I'm paranoid that it might be a Spyware... ? None of my passwords and others are corrupted though, everything has been fine. I am making bluescreens (but not daily). I scanned with Malewarebytes and found nothing and I do that again right now. I also tried Registry Mechanic and Windows Security Essentials, but found nothing.

    I have no idea what Forum put it, this is my first time using this site...

    Model: DELL Studio XPS 1330

    Windows 7 Ultimate (64-bit)

    (I had this computer for about a year)

    The position of Bramble to drown in this issue How to start the program before windows logon user 7 Siena above [Archer] suggestion that you should study the entries in the services.

  • I have a new pc with windows 8 and 10 of the IE and cannot install firefox?

    I have a new pc with windows 8 and 10 of the IE and cannot install firefox? Can anyone help?

    I have a new pc with windows 8 and 10 of the IE and cannot install firefox? Can anyone help?

    Hello

    You can find support for Firefox issues on the following links.

    Firefox Support home page. Firefox Help:

    http://support.Mozilla.org/en-us/home

    Firefox Support Forum | Firefox Help:
    http://support.Mozilla.org/en-us/questions

    Concerning

  • I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

    I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

    Thank you for your help.  I just downloaded the Photoshop CC2015 for the 7th time and it now seems to work fine.  Sorry to have bothered you... It is good to know that there are people like you who will help if necessary.

    Thanks again.

  • When you use the question mark, appears like a capital E with accent French and cannot use the quotes.

    Original title: I can't use my question mark (rises like a capital E with accent French and cannot use the quotes)

    I'm having a problem from time to time with my ability to use marks quotaion, brands etc. How can I treat it DEFINITIVELY the question.

    Thank you

    Hi golfnut11,

    1. you are using a laptop?

    2. you remember to make changes to the computer priro to this question?

    Step 1:

    If you use a laptop, check if the FN key is enabled. If so, then try to turn it off and check.

    Step 2:

    You can also try to check the keyboard on the screen and if the problem occurs or not.

    Check out the link:

    Type without using the keyboard (on-screen keyboard)

    http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

    If you use a Microsoft keyboard, you can also consult the following article:

    Troubleshoot wired keyboards that do not or only the erroneous characters category
    http://support.Microsoft.com/kb/258826

    Hope this information is useful.

  • I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

    I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

    I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

    Hi vasilisp36877173 ,

    Please see these items:- Learn how to enable or disable Adobe applications

    Solve the problems of activation and deactivation of Adobe and error messages

    Let me know how it goes.

    Kind regards

    Christian

  • Unable to synchronize files; Click here to view the online help. This message keeps appearing at the top right of my iMac and no matter what I do it keep appearing.

    Unable to synchronize files; Click here to view the online help. This message keeps appearing at the top right of my iMac and no matter what I do it keep appearing.

    Hello

    Please see the link below.

    Error: "unable to sync files.

    Hope this will help you.

    Kind regards

    Hervé Khare

Maybe you are looking for