Help with the chapters of the automatic numbering

Similar Questions

• Need help with the automatic backup feature - please!

  Hello

  I recently started a flash animation and the AutoSave feature is enabled.  I got a good animation, but decided to play a little with it.  After a few moments, I decided to call one night and you exit the program ensuring NOT to save my work.  When you open this file the next time, I just found out that Flash has my file saved automatically while I was playing.  Now I have an animation worthless and have to start over again.  Is it possible to go back to an earlier backup or AutoSave at this point or I am about to do a lot of work again?

  Thanks to all who can help.

  As far as I know, the auto save feature is not able to track down the previous versions of the document being saved - that calls for a specified version control system. I think that Flash saves the file only if it is requested to the. There are several ways to enable or disable auto-save:

  1. in the dialog "new Document." You can choose to activate the automatic backup.
  2. In the "Properties of the Document" dialog box, you can set the check mark.

  If these are true, it will not happen of any economy car. The problem may be, there is also a section called ASR. Backup and recovery is not the same when it comes to Flash, but people tend to consider the same. You set the AutoRecover feature in preferences under general.

  • Windows: Edit > Preferences: general > auto salvage
  • Mac OS: Flash Professional > preferences: general > auto salvage

  Both has a default value of 10 minutes and it can confuse the user. Please see the document to make sure, that you have not disconnected ASR instead of the Auto-Save. You can do this:

  1. Go to preferences (Ctrl + U on Windows, and command + U on Mac OS) and check if the automatic recovery is set.
  2. Go to the properties of documents (Ctrl + Windows and cmd + D on Mac OS) and check if the Auto-Save is set.

  The first (in preferences) is ok to have fixed. It is the second, which could have caused problems for you.

  /Ockley

• need help with the automatic management of the space segment

  Hello
  
  I use Oracle 10.2.0.4 on win 2008 Server SP2. I would like to know if we can set the Segment space management auto for RBS and temporary storage spaces. As the data are not permanent in these storage spaces, it will handle automatically?
  
  Please advice

  I would like to know if we can define the management function of space Segment car for RBS and temporary storage spaces.

  Are you on 10g, use the UNDO tablespace.

  If you try to create the undo tablespace with "auto segment space management", you get an error.

  12:25:50 SQL> @ver
  FROM v$VERSION
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
  PL/SQL Release 10.2.0.4.0 - Production
  CORE    10.2.0.4.0      Production
  TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  
  12:26:49 SQL> create undo  tablespace undo datafile 'D:\DB\UNDO_01.dbf' size 2M segment space management auto;
  create undo  tablespace undo datafile 'D:\DB\UNDO_01.dbf' size 2M segment space management auto
                                                                    *
  ERROR at line 1:
  ORA-30024: Invalid specification for CREATE UNDO TABLESPACE
  
  12:30:50 SQL> create temporary tablespace temp1 tempfile 'D:\DB\TEMP1.dbf' size 1M segment space management auto;
  create temporary tablespace temp1 tempfile 'D:\DB\TEMP1.dbf' size 1M segment space management auto
                                                                                                *
  ERROR at line 1:
  ORA-30573: AUTO segment space management not valid for this type of tablespace
  

  The management of cancellation setting must be on "AUTO" for automatic management of the undo tablespace. The temporary tablespace is automatically supported by oracle itself.

  [http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref413]

  Anand

• custom with the automatic numbering sequence metadata field

  I created a custom metadata field and I need to start a zero and then one with each checkin. There are other qualities for this particular area, I managed to do. Currently, the field is V99_99999 where V is a constant, and immediately after the V 99 is the two-digit year. everything works very well. I'm having is the second half of this. I have it currently goes against the content_id, which is 003856 at the moment, when I check in my first content, Cela will look like V09_003857. what I need to look like is V09_00001 and then increase by one with each checkin and then for the part... When really complicated changes in the year, on January 1, the counter should start over to all zeros again.
  
  I'm relatively new to the AAU and it seems huge to me. I bought a book called "The Definitive Guide to Stelelnt Content Server Development" in the hope of finding the answer, but am always sick, so I use another line of life and tender hand to you all.
  
  Thank you
  Patti

  Interesting!

  You will need a component. You already mentioned that you had a custom metadata field. You will also need to add a counter to the table of counters for your component. During a control as you will have to retrieve the following value from the table of counters, increment the counter and store new number back into the table. The part of the id is easy, the year get the current year and enter the last two digits. Then put this togther all to get the data of your metadata field.

  The big question now is where in the process of integration will make you all this? You will need what is called the filters probably. AddFiles maybe, maybe validateStandard, there are several who could work with.

  Discover how-to-components:

  http://www.Oracle.com/technology/products/content-management/UCM/samples/index.html

  -Jason
  http://www.corecontentonly.com

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• can someone help with the following code plsql errors...

  Hello

  If anyone can help with the following code... to get a successful outing.

  create or replace package lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2);

  end lib_01;

  create or replace package body lib_01 as

  procedure lib_proc01 (p_user_id in numbers, p_user_name in varchar2) as

  number of v_user_id;

  v_user_name varchar2 (50);

  number of v_avl_books;

  number of v_avl_days;

  date of v_end_date;

  date of v_return_date;

  Start

  dbms_output.put_line ('Enter User Name');

  dbms_output.put_line (' username :'|| p_user_name);

  Select user_id, user_name in v_user_id v_user_name of user_registration where user_name = p_user_name;

  If v_user_name <>p_user_name then

  dbms_output.put_line (' username is not.) Please submit full name ');

  end if;

  If v_user_id is null or v_user_name is null then

  dbms_output.put_line ("' user not found");

  validate_userLogin;

  on the other

  validate_issuedbooks (p_issuecount);

  end if;

  If v_issuecount < v_avl_books then

  issuebooks;

  on the other

  Number of return of late_fee (p_mem_id, p_extradays, p_latefee_total);

  end if;

  If paid_flag = "Y" then

  issuebooks;

  on the other

  dbms_output.put_line ("' book may be issued due to its maximum reached late fees");

  end if;

  end lib_proc01;

  procedure validate_userLogin is

  procedure reg_proc is

  procedure user_validate (p_id_proof in varchar2, p_id_no out varchar2) is

  v_id_proof varchar2 (20);

  v_id_no varchar2 (20);

  Start

  Select user_name, id_proof, id_no, v_user_name, v_id_proof, v_id_no of user_registration where id_proof = p_id_proof;

  If v_id_proof = "Adhar_Card" then

  dbms_output.put_line ('user a valid proof of ID');

  dbms_output.put_line (' and the id no. :'|| is p_id_no).

  on the other

  dbms_output.put_line ('Invalid ID evidence.) Please submit valid proof of ID ');

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ('No Data found');

  end user_validate;

  procedure member_validate (p_mem_id series)

  v_mem_flag char (1);

  curr_date date: = sysdate;

  date of v_mem_enddate;

  Start

  dbms_output.put_line('Mem_flag:'|| v_mem_flag);

  Select mem_flag in the v_mem_flag of user_login where user_id = v_user_id;

  If v_mem_flag = 'n' or v_mem_flag is null then

  dbms_output.put_line ('The User do not have membership');

  on the other

  Select mem_id in the v_mem_id of user_login where user_id = v_user_id;

  dbms_output.put_line ('the user has membership');

  v_mem_id: = p_mem_id;

  Select mem_enddate in the member_login v_mem_enddate where mem_id = v_mem_id;

  If v_mem_enddate < curr_date then

  dbms_output.put_line ('Membership has expired' | v_mem_id |' on ' | v_mem_enddate);

  on the other

  dbms_output.put_line ('User a validity again' | v_mem_enddate);

  end if;

  end if;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  while others then

  dbms_output.put_line (' another error.) Please find");

  end member_validate;

  Start

  insert into user_registration values ('& first_name ',' & last_name', null, ' & user_type',)

  address_ty ("& bldg_no",

  '& bldg_name',

  '& Street',

  ' & city ",

  '& State',

  '& zip'

  ),

  user_phone ',' & user_mail ',' mem_idproof', ' & id_no');

  Dbms_output.put_line ('user is properly registered');

  exception

  When no_data_found then

  dbms_output.put_line ("' data not found");

  end reg_proc;

  Start

  Dbms_output.put_line (' enter ID or user name ');

  Dbms_output.put_line (' username: ' | p_user_name);

  If v_user_name is null then

  Dbms_output.put_line ('user not found');

  reg_proc;

  Insert user_login SELECT user_id_seq. NEXTVAL, user_name, NULL, mem_id_seq. NEXTVAL, user_type FROM user_registration WHERE user_name is lower (p_user_name);

  Dbms_output.put_line (' because the user wants to have the membership? ");

  Dbms_output.put_line ('If Yes, please pay dues");

  INSERT INTO member_login SELECT mem_id_seq. CURRVAL, SYSDATE, SYSDATE + avl_days, 500, 'Y' of user_login ul, bl book_loan WHERE ul.mem_type = bl.mem_type AND user_name = p_user_name;

  END IF;

  exception

  When no_data_found then

  dbms_output.put_line ("' no data found");

  When too_many_rows then

  dbms_output.put_line (' too many lines).

  END validate_userLogin;

  procedure validate_issuedbooks (p_issuecount series)

  number of v_issuecount;

  Start

  Select user_login u, bl book_loan, avl_days, avl_books in v_avl_days, v_avl_books where bl.mem_type = u.mem_type and user_id = p_user_id;

  SELECT count (case when end_date < end return_date then p_mem_id) as invalidcount in v_issuecount from book_count where mem_id = p_mem_id;

  v_issuecount: = p_issuecount;

  dbms_output.put_line (' no. books that the user contains the :'|| p_issuecount);

  end validate_issuedbooks;

  procedure issuebooks is

  procedure book_avl (p_avl_now_flag in p_avl_date Boolean, date) is

  v_avl_now_flag char (1);

  date of v_avl_date;

  procedure reader_bookissue is

  Start

  insert into values drive (p_user_id, v_book_id, sysdate, sysdate, null);

  insert into book_count values(p_mem_id,v_book_id,sysdate,sysdate,null);

  Update book_availability set issued_to is "Reader" where book_id = v_book_id;.

  end reader_bookissue;

  Start

  Select book_name, b.book_id avl_now_flag v_book_name, v_book_id, v_avl_now_flag of the book b, book_availability b where b.book_id = ba.book_id and ba.book_id = p_book_id;

  If v_avl_now_flag = "Y" then

  dbms_output.put_line ('the book is available for issuance' | v_book_id);

  on the other

  Select mem_type in the v_mem_type of user_login where user_id = (select user_id from book_availability where avl_now_flag = 'n' and book_id = p_book_id);

  If v_mem_type = "Reader" then

  reader_bookissue;

  dbms_output.put_line (' the book is with Reader.) Please try tomorrow.') ;

  on the other

  dbms_output.put_line ('the book is member');

  end if;

  Select avl_date in the book_availability v_avl_date where book_id = p_book_id;

  v_avl_date: = p_avl_date;

  dbms_output.put_line (' the available date is: ' | p_avl_date);

  end if;

  end book_avl;

  Start

  insert into book_count values(p_mem_id,p_book_id,sysdate,sysdate+v_avl_days,v_return_date);

  Update book_availability set book_id = p_book_id, avl_now_flag = 'n', avl_date is to_date (sysdate + v_avl_days,' dd-mm-yyyy ""), issued_to = v_mem_type, user_id = p_user_id where mem_id = p_mem_id;

  commit;

  dbms_output.put_line ("' the book published successfully");

  end issuebooks;

  Number of function return late_fee (p_mem_id in number, p_extradays series, p_latefee_total number) is

  number of v_extradays;

  number of v_latefee_total;

  number of v_latefee_per_book;

  number of v_latefee_per_day;

  number of v_book_count;

  Start

  Select trunc (sysdate) - v_end_date in v_extradays from book_received where mem_id = p_mem_id and book_id = p_book_id;

  p_extradays: = v_extradays;

  v_latefee_per_book: = v_latefee_per_day * v_extradays;

  v_latefee_total: = v_latefee_per_book * v_book_count;

  p_latefee_total: = v_latefee_total;

  dbms_output.put_line ('The total AMT for not returned books' | p_latefee_total);

  end late_fee;

  end lib_01;

  Hello

  I checked the first 10 lines after the beginning and I could count already several errors.

  Is it an exercise or a real code, you must provide?

  Kind regards.

  Alberto

• Need help with the API Explorer

  Hi all

  I am creating a workflow to automate certain tasks of P2V and I want to disconnect the NETWORK adapter prior to anyting on virtual machines. When everything is done, I want reconnect you this NIC I play with vCO for a few months now and I need to get help with the part of the script. I always managed to find a code but this time I did not find anything!

  So I need to script this part! I think I found a way to change the connection settings of the VMXNET3 NETWORK adapter with this part of the code:

  System.getModule("com.vmware.library.vc.vm.spec.config.device").getVirtualVmxnet3(backing,connectable,controllerKey,deviceInfo,key,unitNumber,addressType,macAddress,wakeOnLanEnabled)
  var connectset = new VcVirtualDeviceConnectInfo();
  connectset.connected = false;
  connectset.startConnected = false;
  

  Now, I need to find the way to set these parameters to a VM VMXNET3 adapter?

  How to off the virtual machine to these settings?

  Thanks for your help!

  If you are connected to a distributed switch, they canned for this com.vmware.library.vc.networking.connectVmNicNumberToVirtualDistributedPortgroup action.  If this isn't a vds connect you to, then you need to change then it will have to be slightly modified to use normal NIC instead of vds support.  You will also need to add these lines to the device configuration section:

  devicespec. Device.connectable = new VcVirtualDeviceConnectInfo();

  devicespec. Device.connectable.Connected = true;

  devicespec.device.connectable.startConnected = true;

  I copied this action and added these 3 lines to achieve what it looks like you are trying to do.  We don't really use standard switches in our environment.

  Paul

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• My camera has reached 9999 photos and started renumbering 0001 but in a different folder.  If I import new photos in iPhoto, the older photos with the same numbers are overwritten?

  My camera is renumbering pictures from 0001, but a new camera case.  If I import new photos in iPhoto, they replace the old photos with the same numbers?  The camera knows that they are in a different folder, but what happens when I import into iPhoto?

  iPHoto manages very well duplicate file names - each import is in another folder in the database - no problem

  LN

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update