Help with the help of the multicam sequence

Similar Questions

• Problem of color correction between the initial and the multicam sequence... Help, please

  I used three cameras to record a youth dance recital.  I created a sequence of orginal for three camcorders and another sequence using multicam editing dances.  After I finished editing, I went back to the original sequence to do some color correction and adjustment of brightness using the Quick Color Correction controls.  After that, I just sent in again to create a DVD.  When I watched the DVD, I noticed some of my settings were always off, the color correction so I went back to the original sequence to make some changes.  Unfortunately, the multicam sequence would not read the new settings.  After a few unsuccessful attempts to get the element from the sequence multicam to read the original sequence clip, I decided to start by disabling fast Correction of the colors of the clip commands.  The adjusted multicam sequence then return corresponding to the original sequence.  However, when I started a new control for fast Correction of the color in the original sequence, the sequence multicam wouldn't take the new settings.  How to get the sequence mulitcam read the orginal sequence?

  Look for the error of the operator on this one.  Check that you are working in the source used for the multicam sequence.  You can do this by going to the multicam sequence and pressing SHIFT + T.  This will open the original with the ITC on the same chassis.

• Trim before the Multicam sequence at the point

  I have synced muliple clips by points in first CC. But I still want some of the images before the points in. When I try and this it says trim trim media limits achievement.

  Can anyone help?

  Right-click on your multicam sequence in the project window and choose "Open in the timeline. There, you'll see the clips that you have sync'd up and you can extend the points in. Just keep their double up and synced and when finished slide to the beginning of this sequence. Now your sequence multicam in either scenario will have added additional sequences.

  OR... You could also...

  Toggle this little icon on the left side of the timeline (the button we left wing):

  

  Then simply drag your multicam on the timeline sequence, and all the video and audio tracks will come with it. Adjust according to your needs, then select all the media (or what I do is alt + select the video you just because I want to see all of my audio tracks still on the same timeline) and right-click and choose the NEST. Then right-click on this nested element and select MUTICAM > ACTIVATE.  Fact.

  Don't forget there is a button of unwieldy rocking on the window of the program now in CC for the filming of Multicam on or off as it is now within this window. Good luck!

• the multicam sequence is not available on the menu drop-down

  When I select the clips with that I want to create a sequence of multicam, multicam sequence selection is not highlighted in the menu drop-down?

  Any thoughts will be highly appreciated!

  all the best

  peace,

  SA

  Thank you!... Turns out I wasn't lack a step.

  but I learned that you can create sequences blocking with clips that were merged to the audio.

• in combination with the function sequence

  Hello
  
  I have a problem with a sequence in combination with a function.
  
  I want to generate a kind of a hardware inventory report that contains some kind of a hardware ID (a number not repetitive, auto-increment, allowed deviations). However, I have to keep track of what material ID I used to which material of the inventory, for reasons of traceability. Another important requirement is that whenever the report is run, that the returned hardware IDs are never repeated. If repeatedly runs for the same hardware in the inventory must always return new material ID.
  
  So I was about to create a simple function from PL/SQL where I spend my data of traceability as parameters. Then the function uses internally a sequence (nextval) to generate a new hardware ID, then stores the new ID of material by related values in the input in a table (autonomous transaction) parameters and returns the new ID.
  
  It works pretty well so far.
  
  Now the tricky part: I want where I want to go back the same ID in different columns of a SQL statement.
  
  Let me give you an example:
  

  CREATE SEQUENCE XXX_TEST_SEQ
  MINVALUE 1 MAXVALUE 999999999999999999999999999
  INCREMENT BY 1 START WITH 1
  NOCACHE NOORDER NOCYCLE;
  
  
  CREATE PACKAGE XXX_TEST_PKG AUTHID CURRENT_USER AS
  FUNCTION get_id(p_someparameter NUMBER) RETURN NUMBER;
  END XXX_TEST_PKG;
  
  
  CREATE PACKAGE BODY XXX_TEST_PKG AS
  FUNCTION get_id(p_someparameter NUMBER) RETURN NUMBER IS
    l_new_id NUMBER;
  BEGIN
    SELECT XXX_TEST_SEQ.NEXTVAL
      INTO l_new_id
      FROM DUAL;
      /* do some more logic, e.g. store the freshly generated ID 
          together with the input parameter values in some tracing table */
    RETURN l_new_id;
  END get_id;
  END XXX_TEST_PKG;

  It is a simplified version of the function for demo.
  
  We will use:

  -- 1) this works as expected:
  select xxx_test_pkg.get_id(1) from dual;
  
  XXX_TEST_PKG.GET_ID(1) 
  ------------------------ 
  1                        
  
  
  -- 2) this returns two different numbers:
  select xxx_test_pkg.get_id(1) as id_one
      ,  xxx_test_pkg.get_id(1) as id_two
  from dual;
  
  ID_ONE                 ID_TWO                 
  ---------------------- ---------------------- 
  2                      3                      
  
  
  -- 3) This is the problematic case: I want to return the same ID two times:
  select my_id as id
       , my_id as same_id
   from (select xxx_test_pkg.get_id(1) as my_id from dual);
  
  ID                     SAME_ID                
  ---------------------- ---------------------- 
  4                      5                      
  
  
  -- 4) CURVAL on these sequence does not work:
  select my_id as id
       , xxx_test_seq.curval as same_id
   from (select xxx_test_pkg.get_id(1) as my_id from dual);
  
  SQL Error: ORA-00904: "XXX_TEST_SEQ"."CURVAL": invalid identifier
  
  
  -- 5) This gives the output that I need, but why?
  select my_id as id
       , xxx_test_seq.nextval as same_id
   from (select xxx_test_pkg.get_id(1) as my_id from dual);
   
  ID                     SAME_ID                
  ---------------------- ---------------------- 
  7                      7                      

  Query 3 is one who gives me headaches. I need to return the same ID in different columns. But it returns only two different pieces of identification. I know that the optimizer will merge the two select statements into one and therefore perform the function twice. Someone knows how can I avoid this?
  
  Which is a little strange to me, it's the query 5 is really what I need, but at first glance I would say that he should not do. I would say that using nextval would be me again another number sequence.
  
  It's confusing... Can someone explain this and advise how can I build a query if I can get the same ID twice by line?
  
  
  I know that I can totally get rid of the sequence in my function and use something different, but I was wondering if I can avoid to change my function.
  
  
  Thank you
  David.

  Oracle's FUSION query inline with the outer query block, which causes the function being called twice.

  Instead of MATERIALIZING suspicion, or relying on ROWNUM = 1 effect predicate aside, I would explicitly tell the optimizer to not do so via the NO_MERGE indicator.

  select my_id as id
       , my_id as same_id
  from (select /*+ NO_MERGE */ xxx_test_pkg.get_id(1) as my_id from dual);
  

• 2015.3 audio problem with the nested sequence

  When nesting one sequence in another, the audio from the original sequence gets completrely lost since the last update.

  If the nesting of the sequences is not possible.

  Correction of the source in Premiere Pro sequences

• Help with the loading sequence.

  I am new to AS3 come AS2 and trying to figure out how to code a simple sequence scene support. That's how I had set it up in AS2 -I've got two scenes, "Scène 1" and "scene 2". I have a 10 frame shape tween in scene 1.  On the frame 9, I assigned actionscript which will check to see if the frame of 40 of stage 2 is loaded, and if it is, gotoAndPlay scene 2, picture 1.  Then to have action in the frame 10 scene 1 who says to the stage 1 gotoAndPlay frame 1 of the current scene.  This way scene 1 loops up to the 40 scene 2 frame is loaded, at that time, scene 2 chassis 1 time.

  How can I configure it in AS3?  Here's what I've tried - I have two scenes, "Scène 1" and "scene 2". I have an MC which is a simple shape tween that loops through the "scene 1". I am trying to assign the code in 'Stage 1' which will check to see if the 40 scene 2 frame is loaded. If this is the case, gotoAndplay stage 2 Framework 1. If the frame of 40 of stage 2 is not loaded, service to loop unitil the MC it is. Here is the code I have for the MC of the "stage 1".

  {onClipEvent (enterFrame)}
  If (I > 40) {}
  gotoAndPlay ("firstframe", "Scène 2");
  }
  }

  "firstframe" is the label of image for image 1 in scene 1. That seems more difficult in AS3 than AS2. I'd be grateful if someone could help me.

  
  I would much appreciate it if someone could help me.

  attached to the last frame in the scene 1:

  {if(this.framesLoaded>=50)}

  this.gotoAndPlay (1, "scene 2");

  } else {}

  this.gotoAndPlay (1);

  }

• How to remove the project using sql with the proper sequence

  Hello

  Tried to delete the project failed with query according to the sequence shown below. But get error when running below final sql script (delete from epub_process where of the project = '?')

  SQL error: ORA-02292: integrity constraint (PUB.) PROC_HIST_ID_FK) violated - book of the foundling

  02292 00000 - 'constraint integrity (s.%s) violated - child notebook found. '

  * Cause: attempted to remove a parent key value that was a stranger

  dependence.

  * Action: remove dependencies first then the parent or disable the constraint.

  delete from avm_asset_lock where workspace_id in

  (select avm_devline id, whose name in)

  (select Workspace from epub_project where project = 'prj49024')) ;

  delete from EPUB_PR_HISTORY where project in

  (select project in epub_project where project = "prj49024");

  delete from epub_project where project = "prj49024";

  delete from EPUB_PROC_HISTORY where ID_processus in

  (select ID_processus from epub_process where of the project = "prj49024");

  delete from EPUB_PROC_TASKINFO where id in

  (select ID_processus from epub_process where of the project = "prj49024");

  delete from epub_taskinfo where ID_processus in

  (select ID_processus from epub_process where of the project = "prj49024");

  delete from EPUB_WORKFLOW_STRS where id in

  (select ID from EPUB_IND_WORKFLOW where ID_processus in)

  (select ID_processus from epub_process where of the project = 'prj49024')) ;

  delete from EPUB_IND_WORKFLOW where ID_processus in

  (select ID_processus from epub_process where of the project = "prj49024");

  Get the error when running this script

  remove the epub_process of the project where = "prj49024";

  Please let me know good sequence or how to avoid this mistake

  Thank you

  Sri

  Here are the steps:

  delete from EPUB_PR_HISTORY where project in ('prj213002', 'prj200001');

  delete from EPUB_PROC_HISTORY where ID_processus in

  (select ID_processus from the epub_process of the project where in ('prj213002', 'prj200001'));

  delete from EPUB_PROC_TASKINFO where id in

  (select ID_processus from the epub_process of the project where in ('prj213002', 'prj200001'));

  delete from EPUB_IND_WORKFLOW where ID_processus in

  (select ID_processus from the epub_process of the project where in ('prj213002', 'prj200001'));

  remove the epub_process of the project where in ('prj202001', 'prj213002');

  delete from avm_asset_lock where workspace_id in

  (select avm_devline id, whose name in)

  (sélectionnez project_id dans epub_project où project_id dans ('prj213002', 'prj213002'))) ;

  delete from epub_project where project in ('prj202001', 'prj213002');

  commit;

  Peace

  Shaik

• Problem when you place the multicam in sequence clip

  I'm not exactly sure how the word this question, so I made a little video.

  Basically, I created my multicam sequence like I always do.  When I drag my mount sequence, rather a multicam is going, I get the content of the multicam sequence.  When I do this on a co-workers computer, using the exact same project file and the media, everything works fine.

  I'm sure it's just a setting that should be changed but I'm not sure what to look for.

  I use the latest version of first, a 5 d and audio of a Zoom camera images.

  Click the icon to the left of the magnet under the temporal order.

• Clips superimposed on the screen of the Multicam monitor

  Forgive my stupidity, I tried searching and clicking to 45 minutes by myself, and I could not resolve this issue.

  I did a show on both cameras, zoom Q8 and a Sony A5000.

  The Sony cut twenty-four minutes and has been reset a minute later.

  I put three files in the Multicam sequencer and it does a great job to synchronize two clips from Sony with the clip of Zoom up.

  On the timeline, it shows all forms of wave three, but in the program monitor the clip of Zoom is superimposed on the video for Sony, with a black box empty next to them.

  I guessed that the black box of the void would be where the second clip of sony would be displayed to the minute 24, but when I moved was put at the head of reading above the black box disappeared and the second clip as the clip of zoom.

  I guess I'm lucky the clip of zoom is smaller, otherwise I do not know both played

  Also only a single clip appeared in the source window, which is not like the demo.

  What I did wrong, I want just a click cam cam as in the demo video.

  Seems to me that you need to activate your monitor blocking

  If you have synchronized your clips and edited the multicam source to the timeline sequence then activate the multi camera monitor from the monitor settings button program (key or wrench)

  

• Where is the Multicam monitor in first Pro CC?

  Try to work on a project to get an edition of the seminar made two camera and I can't find the Multicam monitor?  I have manually synced both files into a single sequence and then created another and allowed a sequence like a multicam, just as usual.  I even double clicked on the multicam sequence to bring it into the monitor and the two cameras are displayed, but when I click on the individual cams as the clips play (in the monitor or in the timeline panel) nothing happens with the sequence.  None of the changes are made in the timeline panel.  I realize it isn't a record type button in the window that displays the two cams and the usual red highlight of the multicam monitor stays yellow around the clips.  Y at - it something miss me just, how can I get the 'changes' I in the monitor to become actually changes on the timeline so I don't have to go and do it manually.  (It's a two-hour seminar, just trying to save time here)

  Thank you!

  -Sean

  Hi Sean,.

  In first Pro CC multiple camera monitor is now in the program monitor. To activate it follow these steps.

  Click on the settings button (the button shaped like a key part in the lower right corner of the program) and multiple cameras, select the menu that appears. This converts the program mode multicamera monitor.

  Here are two tutorials here:

  Video:

  http://TV.Adobe.com/watch/learn-Premiere-Pro-CC/using-MultiCam-mode-to-AutoSync-multiple-a t-or-a.

  Text:

  equence-with-clips-synchronized-by-audio.html http://blogs.adobe.com/PremierePro/2013/04/a-Quick-Walkthrough-of-Editing-a-multi-Camera-s

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• JavaScript in the batch sequence

  I made some Acrobat scripting but especially by VB and I'm able to write what I need, but I want it as part of Acrobat to my operator instead of the separate program. That said, I want to write a Java script that I can include in the batch sequence.

  I need to add a page at the beginning of a document and I want to have this page be nubered 'a' without disturbing the numbering else where in the file. By simply adding the page initially with the batch sequence, it adopts the numbering of the first page. So, if the first page is numbered as 'i', then the new inserted page is numbered "i" and the rest of numbering of the changes, what was I becomes ii, which was ii becomes iii and so on. I am capable of this VB script by adding the page to the end, renumber them using the SetPageLabels of a Javascript object, then move the page initially.

  Is there a documentation on the use of Javascript in a sequence of batch processing?

  Thank you

  Ken

  You specify not valid values in the parameter aLabel. The first value should be "D", if you want to use the decimal numbering.

• SEQUENCING WITH THE HELP OF SQL

  Hello
  
  I have a requirement such as if my data is as follows
  
  name identity
  1 John
  2 John
  3 jane
  4 jimmy
  5 jimmy
  Jack 6
  
  I need a sequence that looks like
  
  Name seq ID
  1 John 1
  2 John 1
  3 jane 2
  4 3 Jimmy
  5 jimmy 3
  6 Jack 4
  
  and so on
  
  So, I have a suspicion we can use analytics, but cannot set up a query to do this.
  
  Sorry, it of a little naïve but would appreciate a hint...
  
  Thank you
  Birdy

  Hi, Birdy,

  Birdy says:
  Hello

  I have a requirement such as if my data is as follows

  name identity
  1 John
  2 John
  3 jane
  4 jimmy
  5 jimmy
  Jack 6

  I need a sequence that looks like

  Name seq ID
  1 John 1
  2 John 1
  3 jane 2
  4 3 Jimmy
  5 jimmy 3
  6 Jack 4

  and so on

  So, I have a suspicion we can use analytics, but cannot set up a query to do this.

  Your right; analytical functions can do that. DENSE_RANK assign a number without gaps, duplicate output when the input is duplicated.
  Do you care which name gets seq = 1 and who gets seq = 2? If this isn't the case, you can sort the names alphabetically:

  SELECT     id
  ,     name
  ,     DENSE_RANK () OVER (ORDER BY  name)     AS seq
  FROM     table_x
  ;
  

  In the output you posted, it appears you want what they classified by the id low associated with each name ('Jean' = 1, 'jane' = 3 and so on). You can get the id low with the analytical MIN function:

  WITH     got_min_id     AS
  (
       SELECT     id
       ,     name
       ,     MIN (id) OVER (PARTITION BY name)     AS min_id
       FROM     table_x
  )
  SELECT     id
  ,     name
  ,     DENSE_RANK () OVER (ORDER BY  min_id)     AS seq
  FROM     table_x
  ;
  

  Analytical functions cannot be nested. In other words, you can not say

  ... OVER (ORDER BY MIN (id) OVER ...)
  

  That's why I used the got_min_id of the subquery.

• With the help of COM server to call testing in TestComplete

  Hello

  I use the adapter COM call testing in TestComplete.  I could always successfully and run the first test using the call sequence, but when I try to call the second test with a different calling sequence, I get the message "Cannot start another instance of this application" and "doesn't have to"Create a new object"in automation call.»
  Server execution failed [error Code:-17502] ".»

  I tried to use the option not to load and unload in the Option run and I received another message "IntegrationObj = null.

  My setup is I have a Master file of sequence that contains two sequence files (one for each trial).

  The individual called movie file have 4 steps as indicated:

  Get property: Create the new object

  calling a method to open project

  Call the method to run the test

  Get the result of the property

  Thank you very much for the help.

  Thanks Doug, I'll try that.

• With the help of SequenceFilePreStep StepName run or skip

  Looking for help with a modification to my test menu.

  I have a number of subsequences that will call the test specific files that:

  (Not SubSeqCall) Compare_Interface_Max.SEQ (where the StepName contains the name of the sequence file called)

  (Instruction step)   Rename the Test with the account of the error file (Call a DLL to rename the "Compare_Interface_Max.seq" file as: 0 - Compare_Interface_Max.seq I know how many errors are in the file.)

  This format is repeated for test sequences about 180.  Sometimes, there will be a timing problem and I need to run some tests.

  What I'm trying to do is to before running each test, use a DLL call to test a file name in the directory of reports such as "0 - Compare_Interface_Max.seq" and NOT to run the test, if it is already passed.

  Two problems:

  1. How can I get the StepName calling within the SequenceFilePreStep?

  I can't seem to find in the "Runstate.Caller" variables... ».  I need the name of the step that calls to test the name of the file.

  (I tried to adjust the Locals.sStepName to the current stepname inside the expression pre-echelons, but it does not yet exist, PreStep is not yet known when the SequenceFilePreStep is called.)

  2. once I have the name of the step (i.e.: contains ".seq") so I can do my call to the DLL to test to see if the file exists.

  If the file is already outdated OK, I want to SKIP the step of subsequence call and the next stage of education, and I do not know how to do it from inside the SequenceFilePreStep.

  Any suggestions?

  Mike

  RunState.Caller.Sequence.Main [runstate. Caller.RunState.NextStepIndex]. Condition = "False".

  RunState.Caller.Sequence.Main [runstate. Caller.RunState.NextStepIndex + 1]. Condition = "False".