Where is the Multicam monitor in first Pro CC?

Similar Questions

• Two toppings selections in the time scale to the source monitor. (First Pro CC2014)

  I'm really confused by this apparent novelty or glitch, pp. I'm working on an old project that has been improved cs6 by CC and now the CC2014. Several of my videos have evolved at a different point in the source media, so the clip is always the same length on the timeline, but contains a completely different part of the film. When I double-click the clip in the timeline to open it in the source monitor, I get two balances on the scale of time like this:

  

  I'm quite confused by the present, I have never seen this. Especially I don't seem to be able to move one of them independently of the right section of the images enter my cup, and I can't delete any of them.

  Is this something that is due to the upgrade, or is it a setting/preference changed CC in 2014. I did have this problem in any other project before installation of 2014 earlier this week and now I hesitate to initiate other projects in the case where he made a mess of them also!

  The blue part is the video the audio part green (this has always been in first)

  If you check selection bound (next to the key) it will probably be 'fusion' when you double-click it.

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• How do monitors vecteurscopes and waveform with the new update in first Pro CC?

  How do monitors vecteurscopes and waveform with the new update in first Pro CC?

  Press the COLOR at the top of the interface or go to the window workspace and select Lumetri Scopes.

  If you are a reverence for the old spans: there have been removed in favor of the Lumetri Scopes.

• In a with two cameras a multicamera edit does not appear in the multicam monitor?

  In a multicamera CS 6 with two cameras one Assembly does not appear in the multicam monitor or rather remains black while it is present in the sequence? Is this due to lack of memory of the CPU? I have a Toshiba Tecra i5

  Thanks if anyone knows why?

  [email removed by Moderator]

  I use Adobe CS6 first

• Cannot add anything to the timeline on Adobe first Pro CC

  I can't add anything to my library project to the timeline on Adobe first Pro CC. It is on a file that I've been working on for a long period of time. I can put in the clips on the timeline in a new project file.

  Any help?

  I solved the problem by creating a new sequence and by copying and pasting my files previously published in the new sequence.

  Sorry for wasting your time.

• How can I insert image into the image in adobe first pro cc 2015

  How can I insert image into the image in adobe first pro cc 2015. I want to put a fixed image on a video sequence as a pip.

  1 import the photo into your project (CTL-I or just drag & drop in the project Panel)

  2 dag photo imported on your timeline in a track located above the video you already have.

  3. click the clip of the photo in the timeline panel and then click on the control panel of the effect of the Source Panel tab.

  4. here you can resize, move, and even rotate the picture of the "query" fixed effect.  You can use the sliders or click on the area next to the word "Query" and use your mouse to do everything from the program Panel.

  Good luck and have fun.  BTW: once you get it you like, you can even animate the PIP to fly in or any other movement, you can think of with keyframes.

• The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

  Yes, he does. I have the 980 and it works very well also.

• Is that what I can change the fisheye, look in first pro, a GoPro camera?

  Is that what I can change the fisheye, look in first pro, a GoPro camera?

  It depends, at least in part, on what platform you are. [That and you have the exact version of Premiere Pro are two data points that you always include...]

  Under Windows, first has an effect called lens distortion.  I don't know what are your options on Mac. If someone else does not come with any suggestions for Mac, then googling '"Premiere Pro" mac GoPro fisheye"gives a few promising hits.

• How can I get my file in the time line in first Pro CC?

  How can I get my file in the time line in first Pro CC? I am using first Pro cs6 and unfortunately my labtop crashed and I lost all of my products from adobe. I wanted to check a trial version and I can't seem to find one for CS6! Please help me! My project is due tonight!

  Hi Aneumann,

  Welcome to the Forums.

  You just need to right-click on the imported clip in the project Panel, and select new sequence of the clip. You can also go to the file menu > new > sequence and create a sequence, then drag the clips after importation, in the timeline.

  Kind regards

  Vinay

• Hello, how can I get the update for adobe first pro 2003?

  Hello, how can I get the update for adobe first pro 2003?

  No, the original CS will not work on Windows 7 and old products are more supported, anyway:

  Error: Unavailable activation server | CS2 or Acrobat 7, older products

  Mylenium

• Clips superimposed on the screen of the Multicam monitor

  Forgive my stupidity, I tried searching and clicking to 45 minutes by myself, and I could not resolve this issue.

  I did a show on both cameras, zoom Q8 and a Sony A5000.

  The Sony cut twenty-four minutes and has been reset a minute later.

  I put three files in the Multicam sequencer and it does a great job to synchronize two clips from Sony with the clip of Zoom up.

  On the timeline, it shows all forms of wave three, but in the program monitor the clip of Zoom is superimposed on the video for Sony, with a black box empty next to them.

  I guessed that the black box of the void would be where the second clip of sony would be displayed to the minute 24, but when I moved was put at the head of reading above the black box disappeared and the second clip as the clip of zoom.

  I guess I'm lucky the clip of zoom is smaller, otherwise I do not know both played

  Also only a single clip appeared in the source window, which is not like the demo.

  What I did wrong, I want just a click cam cam as in the demo video.

  Seems to me that you need to activate your monitor blocking

  If you have synchronized your clips and edited the multicam source to the timeline sequence then activate the multi camera monitor from the monitor settings button program (key or wrench)

  

• How will I know that I am in the last frame of the clip or sequence first pro?

  Hi I'm new to first pro and do not seem to find a way to know if I'm in the last frame of a clip in the control screen and anyway for monitoring time online. We know what the marker is the 'end of the clip? My previous program showed a line of jagged at the end of the frame.

  Thank you

  If you click on the key on the program monitor and select settings-trap settings the settings box gives you the opportunity to 'end of indicators media/sequence.

• The recent release of first Pro CC still has bugs:)

  First Pro CC track matte questions - YouTube

  Premiere Pro CC Interlacing issues - YouTube

  The recent first Pro CC update has not resolved questions of bug I reported. I wonder if the bugs can be fixed or not.

  Super sorry for these questions, Andy. I have a bit of good news, if.

  1. The question of mast track is scheduled for a fix in the next major update.
  2. The issue of interlacing is scheduled for a fix in the next update.

  As far as the 3D rotating bug goes, I found an intern who has been closed a long time ago. I don't think it will be fixed for the following reason: you can already achieve the effect using different techniques.

  When it comes to most of the problems you describe, it's usually a matter of rendering pipeline that requires a change. To change the order to make pipeline is done by nesting. The clip of the scale, nest, and then add the 3D effect. It should work fine then.

  As an alternative, Premiere Pro has a video effect that acts as a motion effect, so that you can avoid nesting: transform. Just add the transform effect and change the stacking order of the 3D effect of pivot lower for this purpose. In fact, this seems to be preferred between the two.

  Kind regards

  Kevin

• Several accidents since the last update of first Pro CC 2015.2 (9.2)

  • Several accidents since the last update for Premiere Pro 2015.2 CC (9.2.0 (41) build).
  • OS x 10.10.5 on a MBP with 16 GB of RAM 2.6Ghx.
  • Crashing, occurs when you drag the clips on the timeline or change their swing upwards or downwards.
    • Locks with beachball...
    • Then it stops and restarts.
  • AE and PS seem stable.
  • Also very slow.  Constant stops (beachball) opening of clips or add effects.
  • Makes also seems to take a lot of time compared to the previous version.

  Thank you

  GF

  
  

  Changes for clarity by Kevin Monahan

  Hi GF.

  • Several accidents since the last update for Premiere Pro 2015.2 CC (9.2.0 (41) build).
  • OS x 10.10.5 on a MBP with 16 GB of RAM 2.6Ghx.
  • Crashing, occurs when you drag the clips on the timeline or change their swing upwards or downwards.
  • • Locks with beachball...
    • Then it stops and restarts.
  • AE and PS seem stable.
  • Also very slow.  Constant stops (beachball) opening of clips or add effects.
  • Makes also seems to take a lot of time compared to the previous version.

  Sorry for your problems. Since you're under OS X 10.10.5, you can check the permissions of the Adobe folder and perform the basic troubleshooting steps Mac. Check out this post on the forum for more details: Re: first slower than ever, crashes and freezes constantly. Barely able to complete all projects.

  If you can provide a crash report, please do so by following these instructions (just paste them into the thread crashed, in other words, not the whole journal): FAQ: How can I publish a Mac OS X crash log?

  Report after resetting the permissions of folder of Adobe and run any other relevant troubleshooting procedures.

  Thank you
  Kevin