Help Y570 Driver Possible?

Similar Questions

• Satellite L670-1CN - second HARD drive possible?

  Hello

  is it possible to add a second hard drive on L670-1CN? I would like to buy a laptop that has this feature to put an ssd in a second Bay.

  Thank you for your help.

  Hey Buddy,

  Why you n t answer that question yourself?

  If you have a second HARD-drive Bay, remove the HARD drive cover. You see a second SATA connector?
  If so, it is possible to use a second HDD, otherwise not because you can t improve it with such a connector.

• I get a 0x000000003b System_Service_Exception shortly after starting... (graphics driver as possible, external drive possible?)

  Not quite sure the cause.

  I was in the shower, my wife tried using my computer and he went to two monitors go black screen. I hardbooted he took.  When he started my vga monitor showed the charger of the bios, the loader of windows, then double black screen for about 10 seconds and then it restarts.

  I reboot with only the vga is plugged, I started having chkdisk running on one of my external USB drives.  I'd get to the user interface of connection and choose profile admin / default and before the screen goes to the office is blue screen with the error above, 10 seconds passes, it restarts.

  I unplug my external drives and still only vga, (and he only ran chkdisk on just an external, not both my references external and not on one of my internals 2.)  and boot it - I get to connection ui - i can choose my profile or my profile comments/woman and he goes to the Office - until it finish loading all the stuff of taskbar, bluescreens on me, the same error and restarts after 10 seconds.

  I start and go to safemode still only vga, I get desktop on my profile but safemode is no way to really "use" a computer. It is stable, so I hope someone nice enough here can help me recover.

  More moderately Pertinant.

  Its Windows Vista 64-bit Acer
  4 GB shared video and system
  NVIDIA 9200 series card
  AMD Phenom triple core
  BESTFIT VGA resolution is 1440 x 900
  BESTFIT connection Polaroid HDMI HDTV resolution is 1920 x 1080
  The HDMI is normally my main video screen

  for these 2-3 weeks I stayed on my profile, have restarted, there a few times and everythings been groovy.
  About 2-3 weeks ago, I updated a bunch of patches, one of them being my nvidia drivers.  -THAT was a huge problem.

  I had the HDMI connected only at the time of the update. After the update - it defined the default resolution as 13xxby768.  My TV do not like this resolution and cannot evolve in it - so it glitches out my TV and says he has a resolution of 1 p. It also disabled supported dual monitor after the patch, if it is used to run monitors separate dualview.  I had to unplug hdmi, vga only in.  change it back to its best fit of 1440 x 900.  the driver blasted nvidia won't let you set resolutions for screens nonhooked upward, and it won't let you turn on dualview without these two things hung or cloneview.  so I flew over my mouse of choice of resolution area, removed the vga, plugged into the socket hdmi, clicked on a random selection and press ctrl + A to apply it. Once the monitor flickered and remained black, I knew I had an another nonscaleable to resolution, I hit down arrow, ctrl + has once again and got on my second try - a few ridiculous low resolution, then put to scale up his goodness was 1080 p best.  Since that time, I wasn't going to the profile of my wife.

  I think that its possible she hit my making usb cable unplugged the external hard drive.  Or it may have been when she has "changed the user" instead of "disconnecting" as repeatedly, telling him not "change user" he had a huge conflict with trying to keep my resolution and possibly default resolutions on their profile which has been forced by the patch (but does not explain why I can return to my office with nothing connected for a few seconds and it's good resolution for vga).

  I tried to read other messages on this forum and it seems that this may be associated with two graphics cards and removal of hard drives.  However, all the stuff on the disassembly of the drives appeared to apply to the winserver 2003, however, I could be wrong.  I wish myself a an extremely capable user but the drivers and hardware are 1up me.  Thanks a lot in advance to anyone who can help me.  If I need to do a dump or something, to give you more information, would you please tell me how to do this - I know very well my way around safe mode.

  Hello children of the light.

  Thank you for your message.

  You can check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help: HARD drive not recognized in XPS 8500

  Hello

  I have a special edition of XP Dell 8500 which worked perfectly until this morning, when the hard drive is no longer recognized.  When the computer is resumed mode standby, the computer froze and after rebooting the main hard drive is more visible to the system at all.  DSS and DVD discs are recognized, but the HARD drive is not.  It's all original parts factory with Windows 7, and nothing in the computer has changed between yesterday and today.

  I am looking for help on solving this problem.

  I tried to change the power supply and the motherboard to hard drive with well-known cables, changing the setting from BIOS of RAID and AHCI, but nothing works.

  Start with a DVD of Windows 7 does not detect the HARD drive at all. Run the diagnostics Dell system via F12 at startup can't find any errors - but also, he does not see the whole HARD disk.

  Thanks in advance for any helpful ideas.

  You have done all your possible - the drive is toast and needs to be replaced.

• Windows 8 and Windows 7 64-bit drive Possible? laptop

  Well, unfortunately, I downloaded windows 8 and not knowing that I completely itself installed on my previous operating system. (Win7 Home Premium) I lost the disk I got with my laptop so I can not re - install windows 7 and see how I thought it was unfair for me to spend another 100 euros or so on it I was wondering if I could get possibly another windows 7 disc sent to me. I think it would be better if a member of the staff of hp itself could answer my question.

  Thank you

  Hello:

  Nobody works for HP will answer your request on this forum in an official capacity.

  You can buy a recovery for your PC disk by reading the info on the link below.

  http://support.HP.com/us-en/document/c00810334

  Otherwise, I have a solution that is better than nothing if you don't want to order recovery disks.

  Download the ISO file of the version of Windows 7 that is located on the COA Microsoft sticker on the bottom of your PC. There are also the version in the language of your original operating system to PC provided with.

  For example, if your tile is windows 7 Home premium and that the language was Danish, select Download 32 or 64-bit windows 7 Home premium - Danish file.

  Burn the file to a DVD using a program that can burn ISO files so that you can boot from the DVD.

  Install Windows 7. Then use the product key 25 character on the sticker COST microsoft on the bottom of your PC to activate the installation.

  Then pass it the HP support and the driver page for your laptop and install all the drivers you need.

  Link for downloads of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• HP Pavilion Notebook - 17-f207: Please help-need driver

  I need driver for

  HP Pavilion Notebook - 17-f207

  hardver id is:

  ACPI\VEN_ASD & DEV_0001
  ACPI\ASD0001
  * ASD0001

  Thanks for the help

  S

  Hello:

  I zipped and attached to the driver that you are interested in below...

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device ACPI\VEN_ASD & DEV_0001 who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

• HP 15 ac122tu: need help download driver for HP ac122tu windows 7 64-bit

  I tried downloding from the HP support page, but some drivers aren't recoginizing and they are not properly install
  especially the lan driver do not work when donwloading support page
  don't know the reason
  can someone help me in this?
  Need to link to all the drivers for HP ac 122tu

  Hello:

  If you have installed the BIOS driver to support 15-ac122tu page, it's fine.

  What I was writing, it's not not to install the BIOS or the files of the firmware of the 15 t - ac000 on your model.

  The ethernet driver I posted is good for the entire series 15 - ac, including yours.

• Satellite A200-27R - second HARD drive possible?

  Hi all, just wanted to know if its possible to buy a drive hard cady to adapt to a slave hdd in the Bay of spare? [SATELLITE A200 27R]

  If not can anyone tell me what its for. Thank you and
  All the best Dave

  Hey Buddy,

  The question is: do you have a second HARD drive connector?
  If Yes, you can buy this second registered a caddy to drive to a service provider.

  Otherwise it s not possible on a add a second HDD.

• Re: Satellite P300 - 20 h - second HARD drive possible?

  Hello

  I have a p300 - 20 h. On the underside there seems to be a space for a second hd.
  Under the cover for the second hd a sticks that prevent me to install the second hd.
  Is - this to dissuade the installation of a second hd?

  The second HARD drive bay contains the HARD drive connectors?
  If so, the 2nd HARD drive is possible

• Satellite P300-1EI - is a second HARD drive possible?

  Hello

  Before to change the hard drive for more capacity, I would like to know if this laptop is capable of managing 2 hard drives?

  There are 2 places to a physical hard disk, use for the current HARD drive and the second is empty. The connection is present, but I don't know if it's usable? The coverage is also different, he did not use to put something in this space...
  If someone could give me some information about this second location?

  Thank you

  If you see a connector in the second HDD bay it is possible to use a second s HDD.
  Try it, but I think it should work.

  As far as I know for the Satellite P300-1EI you need a SATA 2.5 HARD.

• HP laptop - 15-ac179tx: help Ethernet driver needed for HP laptop - 15-ac179tx

  Hi all

  I recently bought the HP for laptop - 15-ac179tx on the back platform and managed to install windows 7 ultimate I g almost all the drivers on the driver from Hp site, but the ethernet driver is not where to find them. Can someone help me please.

  Thanks in advance.

  Hello:

  You need this ethernet driver...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71268.exe

• DV6Z-6100: help with driver

  The driver listed in my device mgr shows Broadcom 4313GN but I when I scan my laptop on the HP site, it does not show this device as being installed - it shows realtek 8188.

  How can I get the latest drivers for this adapter.

  I just started a problem with my adapter becomes disconnected without reason.

  My new laptop HP wifes also begins this problem last week.

  I don't know why this is the case today - but the two are disconnected from the network - I have to deactivate and activate the adapter so that it can connect to my router.

  You are the very welcome.

  Yes, this ID confirms that your laptop has a WLAN BCM4313 card.

  See if the driver I posted help at all.

  If not, let's try a newer version.

• With the help of driver and comparator on cards PXI-6552 to test DUT Tristate

  A functiona test, I need to check that my DUT outputs are tristate at some point in time.

  Is it possible to use the generation pin electronics driver to drive a voltage of mid range (say 1.6V) and the electronic pin Acquisition window comparator search the tension considerably away from that level (Vil = 1.4V and HIV = 1.8V)?

  So far, the problem is that the WDT waveform format allows a unique nickname by pine and there is no alias indicating drive and compare the two.

  Maybe I have to set some attributes HSDIO who turn manually the drivers and then look for invalid data (between vile and HIV) during cycles when the DAE is tristate?

  Hi Brian,.

  Unfortunatelly the 6552 does not support the States 'lead and check '. The PIN every time he compares goes in three States. Perhaps the best solution would be to get the acquired data and to verify the State of the PIN to this particular sample. In this case, you define your waveform to drive a value and the acquisition will acquire what you are driving (or what's left of the signal). This can be problematic if you run complex scripts, because it is difficult to understand where in the waveforma which is particular State, but electrically measure is correct.

  Let me know if you have any other questions about this work around.

  Kind regards

  Juan Carlos

• Color LaserJet Pro: Help need driver for Mac Yosemite 10.10.2 for LaserJet Color Pro...

  Please help me find the driver for HP LaserJET COLOR PRO 200 for MAC OXC 10.10 YOSEMITE

  This should be what you need

  Driver for OS X 10.9 Mavericks and OS X 10.10 Yosemite

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-125410-4&cc=us&DLC=en&LC=en&OS=4182&productOid=5097639&sw_lang=

• Help: Floppy Drive gets error "Windows - no disk Exception Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c treatment".

  Dell Deminsion 3000, Windows XP Pro SP3, Version 2002, Pentium 4 processor 2.8 GHz, 2.00 GB of RAM disk Y-E Data YD - 702D

  A: floppy drive appears in my computer and in Device Manager where you can read it and the controllers are working properly.  But the diskette in the A: drive is not visible in disk management.  I tried UN-installing, re-installing and updating readers.  I also did that the BIOS was set to Auto & 1.44 3.5.  What can I do to fix this?

  Hello

  This problem seems to be caused by software conflicts or by malware (virus or spyware etc.).

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run the scan on the computer online and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.