Helps converting LV 4.0 LLB LV 2012

Similar Questions

• Help for a conditional indexation in LV 2012?

  Not that I need, but I couldn't find any help on the new feature of LV 2012 conditional indexation. It appears in the context menu, but context-sensitive help provides no hint what it is, and it is not found in Help:

  

  You can find help here section, even if it has enough thin - http://zone.ni.com/reference/en-XX/help/371361J-01/lvhowto/condacc_valuesnloops/

  I can say that the performance has been tested during the beta and that the performance is identical to help to build array in a structure of housing. I guess NEITHER will change that to have better performance, but I don't know when.

• need help converting 4.0 llb version 6.0 or higher

  Some can help me convert version 6.0 or higher of the llb former attached (written in LV 4.0) so I can open it in 2012 LV? THX

  Try posting here: http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion

  Just for reference, here is a table to help you know the required minimum versions.  Version 6.0 + is correct.

  

• help convert the date please

  I have 3 possible length Dates stored in a field of VARCHAR2 type, I'm trying to convert that to a friend:
  
  We are looking for this as a Date or a numeric field, or both in the end (this is what is needed)
  
  YYYYMMDD 20110829
  
  what I have is these different type of length on the ground:
  
  8
  
  13/07/13
  
  9
  
  30/06/2012
  
  10
  
  13/10/2011
  
  Can someone help me convert this field is number: 20120512 or Date YYYYMMDD? the two examples would help too:-) learning

  You can use the below to find the problem dates to your table. SELECT must of course be updated with your table/column names

  CREATE OR REPLACE FUNCTION dateconvert(p_chardate  VARCHAR2)
  RETURN VARCHAR2
  AS
    v_date  DATE;
  BEGIN
    v_date := TO_DATE(p_chardate, 'MM/DD/RR');
  
    RETURN 'OK';
  EXCEPTION
    WHEN OTHERS THEN
      RETURN   p_chardate;
  END;
  
  SELECT datecol
  FROM   datetable
  WHERE dateconvert(datecol) != 'OK';
  

• Just upgraded to Yosemite 10.10.3 including Photos 1.0 that is not synchronized with the Publisher of Adobe Photoshop elements (already installed) 12... any ideas?  With the help of MacBook Pro (13-inch mid 2012)

  Just upgraded my MacBook Pro (13-inch Mid 2012) to Yosemite 10.10.3 including Photos 1.0 that is not synchronized with the Publisher Adobe Photoshop elements 12 (already installed and prev ok with iPhoto)... the ideas please?

  You are right 99jon... with open Photoshop, you click on 'Open' and 'Finder' opens in the window with 'Photos' listed. It's all a bit messy, but seems to work. Thanks again for your help. Bi

• Please HELP convert LOGO IMAGE VECTOR.

  I'm a slow learner that photoshop is not quite the place to create logos, with your help, so can everyone, anyone, please help me. I do not understand how to get the image in illustrator and convert them into a vector image and keeping all the effects, like the sharp edges in the image. Any help is greatly appreciated. In addition, please keep in mind, I'm not at all familiar with illustrator and was hoping that this forum would be a great help. Thanks a lot for your help in advance!
  God bless you!

  I would like to offer a few points to help adapt to your way of thinking a bit...

  Logos are better drawn into vectors and vector illustrations can serve as a basis for various applications of the brand. In general, a form of logo like the one you have here has a solid black fill only. This is the logo of.

  
  

  Using this base, drawn in scalable vectors, you can start designing variations of color, effect decorated versions, etc., but the basis of single-color vector remains to be the origin of the identity, by providing a starting point for all applications of the brand. Because it is vector art, it can be rasterized to any size appropriate for a given application. Example: Suppose that you need to print the logo with the bevel metal brushed texture and chisel edge (effects, better made in a raster like Photoshop application) on a billboard, or on the side of a truck trailer. You must rasterize the basis vector of single-color to the right size and resolution (specifications provided by the printer), and then apply your effects hatched; (this, as opposed to struggling to reproduce the effects of rasterization in vectors, like you said is a goal of yours). There is nothing wrong to create a logo in pixels when this is done correctly this way.

  There is no real 'conversion' raster to vector. You will need to re - draw (manually trace) the forms using the pen of Illustrator. It is the largest and the most basic of Illustrator skills you can develop, and it takes some practice. Then type "how to use the pen in Illustrator" into your search engine preferred to get a long list of tutorials... and be patient.

• I need help, convert a PDF to word format. I bought Acrobat for it?

  I need help to use this download. I bought Acrobat because I need to convert a PDF to word format. Can you give me instructions on how to do it.

  Thank you

  Open the file in Acrobat, use the file--> save money...--> Microsoft Word.

  Mylenium

• Please help, convert this string to a number format

  I send orders via RS232 to my machine and the machine sent back with a display of the number "40" in display normal in my image attatched. I tried to use the string conversion to digital tools, but there is nothing happen just '0 '.

  I wondered with it, then I try output string in a different way as in attached code, display and hex display and see the format of it.

  I want to get the string '40' to take the number, how can I get it? Help, please

  

  Thank you in advance.

  It has worked well for me. Just to be on the safe side, you can use the Trim function spaces (channels palette) to clear the characters "\".

  

  Steve

• Ask for help: convert file 8.2 to 7.1

  Can someone convert the file named 'pilot modbus' (version 8.2) in the file zip attached to the version 7.1 for me? Thank you very much!

  -sxzhang

  Find the modbus in 7.1 driver

• Movie Maker does not play my video and help convert to DVD format.

  I just started using Movie Maker.  I have a few movies made and published to my computer, and they played wonderfully.  I have two questions.  When I return to movie maker and open the file to make a few adjustments different edition of the film will not play.  I've tried everything.  My calendar of film is clearly visible, but nothing makes the reading of the full video in movie maker.  When I go back to recorded versions on my videos that I have no problem playing the video.  What Miss me.  I want to make a minor revision to my film but can't do play in movie maker.

  Second question - I have only the ability to record on a cd on my computer at home.  I have saved movies on a CD and downloaded on my work computer that has Roxio and a DVD burner.  It seems that I have correctly recorded on my work computer to a DVD-R disc, and it appears that when he plays on my computer from the disk, however, when I try to play on a DVD player it displays an error and will not play.  Roxio gives me the opportunity to record in different formats for compatibility (old DVD to Blueray players) and I tried both without success.  Any ideas.

  Thanks for your help!
  Amy

  I just started using Movie Maker.  I have a few movies made and published to my computer, and they played wonderfully.  I have two questions.  When I return to movie maker and open the file to make a few adjustments different edition of the film will not play.  I've tried everything.  My calendar of film is clearly visible, but nothing makes the reading of the full video in movie maker.  When I go back to recorded versions on my videos that I have no problem playing the video.  What Miss me.  I want to make a minor revision to my film but can't do play in movie maker.

  Second question - I have only the ability to record on a cd on my computer at home.  I have saved movies on a CD and downloaded on my work computer that has Roxio and a DVD burner.  It seems that I have correctly recorded on my work computer to a DVD-R disc, and it appears that when he plays on my computer from the disk, however, when I try to play on a DVD player it displays an error and will not play.  Roxio gives me the opportunity to record in different formats for compatibility (old DVD to Blueray players) and I tried both without success.  Any ideas.

  Thanks for your help!
  Amy

  =============================
  What version of Windows are you using?
  (you are in a forum XP but refers generally to publish)
  for Vista)

  What version of Movie Maker are you running?

  What is the format of your backed up files in Movie Maker?
  . MSWMM? .wmv?

  For a re-edition, you need the project .mswmm file
  and all your source files must be in the original
  places where you can see red Xs in Movie Maker
  Collections pane. If you see the red Xs you can
  in a right click of the Xs and get access to the
  current location of the source files and restore
  the path.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Need help converting thickness to Thin, to help migrate does not work

  I'm trying to change some of my VM from thick to thin. I found a link that migrate by using VSphere client I can just click, choose move data store and then change the setting. I do that and everything looks good, he finished and then I check the settings and it still has the thickness value. Any suggestion would be appreciated.

  you are moving to another VMFS volume?

  you're probably not.

  http://sparrowangelstechnology.blogspot.com/2012/08/storage-VMotion-completes-in-zero.html

• Help: Convert INDD > IDML right now?

  Hello, I have a file created with a newer version of InDesign that I can't open. Someone would be available to convert it for me please? It would be greatly appreciated. Thank you. O.

  I can do it for you, or you can download a trial of CC and do it yourself.

• Help converter 5

  5.0 Converter, there's option "synchronize".
  I have on question for you:
  Given that we will convert our computer file virtual server.  There almost 2 TB of data, and it will take a while to complete.  Some data will change as it takes a while to complete. Just wonder option "Synchronize" (see attachment) will synchronize the changes to the destination of the source server VM after cloning?

  Thank you.

  First create a job without finalize. You can schedule synchronization when you create, if you know when or just leave the sync to start immediately after the first cloning. The work will continue after the cloning.

  

  When you know when at the end of the conversion, select "Synchronize" in jobs view. The synchronisation Wizard appears. You can choose which, after the synchronization has finished or even during the initial cloning; You can do during the synchronization clonings.

  

  

  Select the time you want the last synchronization or choose to start immediately. Check the box "run final syhchronization» And voila.
  If you have chosen not to finalize, and then work will remain active until a final synchronization pass, so in this case you will need to select "Synchronize" again and repeat these steps.

  For reference - 86 in the user guide

  HTH

  Plamen

• Help converting a physical server 'live' in a virtual machine VMware VirtualCenter Consolidation 2.5.0

  Hello, I read the manuals and understand the process as much as I have not actually started the consolidation. I have a Compaq ML350 server which has a default of fan cooling and want to make a virtual machine as a starting point. It will be important for the virtual machine to have the same computer name and be a member of our domain. The only question which does not seem to be addressed has to do with the old server. I need to have the available printserver. I know that you cannot have two SID, names of computers or IP addresses on a network domain at the same time. There is an option to change the name of the virtual machine before you start building. It would be wise to use a temporary computer name while doing my first consolidiation/conversion. Once completed, I could stop the printserver, remove the domain, start the virtual machine, rename it, join it to the domain, and then set the IP address to match my old material printserver. I guess correctly? I can't wait to leave the company without a printserver for more than a little bit. I guess additional servers, I wanted to convert should be treated in the same way? If I posted in the wrong place, please accept my apologies. If there is other material that I may have missed that might also be useful, but I have about 4 different PDF so far. Thank you. brand

  I forgot an important step - sorry, you must add the converter

  plugin - in the menu there is a plugins to manage - it's here where you

  can add the client plugin

  Once you do this, you should get this option

  January 28, 2009 at 15:08, 'rsxsr' [email protected]

• Need help converting file Indesign .idml

  I hope that there is a good Samaritan out there.

  I'm in a devil of a pinch; I was sent the files InDesign can't open because of outdated plugins or software on my workstation.  I have CS4 - I believe that the files are CS5. I get that dreaded: SharedContent.IndesignPlugin error when I try to open

  Can someone open and five documents of export in the form of .idml files so I can open them on my system?  Huge karma points and gratitude to all those who can help.  I put the file in the folder permissions to allow the download and unpload via the link below.

  Thank you in advance!

  http://www.mediafire.com/?r68rmu27hv2vr

  Check your PM Inbox...

  Take care, Mike