Helps the slow macbook! quicklookd and kernel_task % high... Posted ETRECHECK.

Similar Questions

• The configuration of the new MacBook Pro and HP C4780 wireless connectivity helps

  The MacBook Pro OS 10.6.3 so the CD that was included in the box of C4780 is should not be used.  I need to configure settings wireless in the printer.  Can I connect the printer via USB and it prints.  All the information that I have seen and read States to use the "Printer Setup Utility" for this, but I can't seem to find it.  All required HP software is upposed to be on the MAC under 10.6.  I'm relatively new to a MAC and I tried to look around to find the utility but don't have happen what it is.  The only utilities that I can find under 'Printers and faxes' and 'Options' for the C4780 are a number of requests for test pages, ink, supplies and other levels.  Can someone point out exactly where I find the Setup utility?

  OK, I did everything above, and does not now print.  I even reset the printer IP to the IP of origin just to try again and also now works.  My printing problem may have had more to do with resetting the print subsystem and then redefine the printer for the Mac.

  In any case, I'm now moving forward with other installation problems.  Thanks for the help and suggestions.

• The slow start-up and Windows scrolls automatically

  I use windows 7. Hit me the power button twice or more to load windows after the BIOS is loaded! (

  I mean it shows "starting windows", but the four quadrants of windows appear not for a long time).

  Can someone help me?

  In addition, one more problem

  When I scroll through various icons or items in a list, often the cursor automatically goes to the top

  or the first icon is selected.

  or when I'm in the middle of a pdf file. I've suddenly will have access to the upper part of the page over and over again. its frustrating! someone help me please sort?

  Original title: startup problem

  Hey fatty,.

  Thanks for posting your question on the Forums of community of Microsoft.

  1. At he start normally before? If YES, you did important equipment or modifications to the software on the computer before this problem?
  2. The second problem is specific to a particular program?
  3. What is the serial number and model your computer?

  The question my occur for various reasons, including some drive corruption, outdated BIOS version or damaged file system. Then I suggest that you try the following steps of diagnostics to verify if you are able to reach the office in one of the following modes methodical.

  Method 1:

  I suggest to run a Startup Repair to repair the damaged boot system files and try to start normally. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  If the problem persists, proceed to the next method.

  Method 2

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean boot the system to exclude the possibility of a software conflict.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Please check the second issue in safe mode and clean boot, as mentioned above. If the problem persists, try to update the display adapter driver, as described below.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Helps the query using case and County

  Hello!
  
  I have problems with a small part of a query below that finally can settle the invoice price.
  
  (count (distinct spm97.sample_id) * 36.1) as "PROFILE."
  case count (distinct spm33.sample_id)
  When (count (distinct spm97.sample_id) = 0) then (count (distinct spm33.sample_id) * 26)
  another (count (distinct spm33.sample_id) * 4.75)
  put an end to 'CC ',.
  
  The first line works - 0 or 36.10 is returned depending on whether or not a profile has been ordered for the sample.
  
  The cost of CC is 4.75 if a profile was also sentenced, if it isn't then the cost is 26. The case statement is supposed to verify this and return the exact amount, but I can't make it work... I get the error message that a closing parenthesis is missing somewhere in the middle of line 3, if that helps.
  
  Any advice would be much appreciated! Of course, this isn't the entire query - joins and all are all working well, it's just this little section with the County that I can't just.
  
  Thank you
  
  JO

  the piece of code below, seems to me is incorrect

      CASE COUNT(DISTINCT spm33.sample_id)
          WHEN
              (
                  COUNT(DISTINCT spm97.sample_id) = 0
              )
          THEN (COUNT(DISTINCT spm33.sample_id) * 26)
          ELSE (COUNT(DISTINCT spm33.sample_id) * 4.75)
      END AS "CC"
  

  It seems that the requirement here is that if * 'COUNT (DISTINCT spm97.sample_id) = 0' *, then * "CC" * should be ' COUNT (DISTINCT spm33.sample_id) (* 26) "ELSE, it should be" COUNT (DISTINCT spm33.sample_id) (* 4.75)»
  If this is the case, the statement must include:

      CASE COUNT(DISTINCT spm97.sample_id)
          WHEN
              0
          THEN (COUNT(DISTINCT spm33.sample_id) * 26)
          ELSE (COUNT(DISTINCT spm33.sample_id) * 4.75)
      END AS "CC"
  

• Need help on troubleshooting an issue and where to post for help

  I don't know where I should post this message but a few months ago, I downloaded Registry Mechanic.
  Recently when I try to open it, I have a window open trying to download the software

  Then a picture comes for HP photo and imaging software 2.0 all in one. say that the CD rom is not available
  Registry Mechanic has been uploaded on the web.

  After that, I get an error message 1706
  This happens everytime I try to access Registry Mechanic. I deleted the program and download the most recent one and still have the same problem.
  Can you explain what has happened and how to fix it?
  Registry Mechanic told me I need to uninstall my HP software, but all I have is HP. To make matters worse I'm on dial up.

  My products

  Model 6510T 64-bit works
  V of PSC 1210 all in one

  Photosmart D110

  HP 435 camera

  Can someone point me in the right direction?

  Thank you.

  The HP photo and imaging only refers to your printer. It's a software has been damaged. You must remove and uninstall all applications of the printer and re - install the printer softtware from the original CD.

• Help! My Macbook Air has a high memory pressure.

  Product: Macbook Air in early 2015

  Plug-

  256 GB of flash storage

  1.6 GHz processor

  4 GB memory

  OS X Yosemite - Version 10.10.5

  A few weeks memory of my Macbook Air pressure continued to increase, most of the time he was in the green zone, but it has been several times that I had the pressure of memory to be in the yellow box with a few tabs in Google Chrome. In addition, the Kernel_Task continues to rise as it was around 380-390 MB a few weeks ago and now he's moved more than 500 MB. I tried to restart and stop the computer several times as an attempt to decrease the Kernel_Task and even thought that the memory pressure is high, the CPU doesn't have a lot of problems, because it is essentially inactive between 65 and 80 percent.

  What it looks like without all the eleven (shown) Google Chrome processes running? You should never see Swap used, and that tells me that you are using too many applications for your 4 GB memory available on your machine. With this RAM limited, you have to be very selective of what applications and browser tabs are open (you use) quit everything.

• Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4

  I can only find 4100 series that does not install.

  Ideas?

  Hi sensho.

  Welcome to the HP Forums!

  I see you are trying to find the driver for your HP Deskjet 4180, with a new MacBook Pro with OS X 10.9.4, and I am happy to help you with this driver issue!

  Please take a look at this website, OS X Mavericks v10.9: installing and using the printer on a Mac.

  Hope this is what you are looking for and have a great day!

• Satellite P770 - helps the touchscreen, backlit screen and Functionkeys

  Hey, I come from Germany and I need your help!

  So be patient with my broken :) English

  My problem is, I have my own version of win 7 and downloaded all the drivers, but 3 things are missing, because the
  replace. First of the drivers for the backlit and the touch screen (sensorkeys). The third thing ist need me feedback on the screen. I downloaded the drivers and installed STIs, maybe I forgot something canyouhelp me?

  Hello

  I hope that you are satisfied with your new laptop Satellite. For some time, I only work with the Satellite P series but this new P770 is not known to me. Maybe I change my P500 by this news. :)

  Back to your ad:
  Retro-illumination (lighting) must be enabled in the BIOS and also in HWSetup tool.
  You know, for all the work options and settings, you must install all the specific tools of Toshiba and utility. Maybe you are missing something.

  I put t understand what is feedback on the screen. What do you mean exactly?

  One more thing: before you installed Win7 clean you created the recovery DVDs?

• Satellite A200 - please I need help, the screen goes pink and green

  Hello world

  I have a Satellite A200 and I have a problem with my screen. It appears suddenly pink and green and it resolves on its own or when I close the lid. It starts from the Toshiba logo before windows logon. Please help me, thanks in advance.

  Hello

  You can try to find what's wrong with your laptop if you would connect it to the external monitor.
  If the same question would be visible on the second, the external monitor then this screen problem could be related to the graphics chip.

  If the image on the external monitor would be nice laptop computer s internal monitor could be faulty.

  However, in both cases, you must contact the ASP in your country for replacement.

  Good luck

• Just migrated to the new MacBook Pro and plugged an external drive with VM - has made "move" or "copy"?

  Hi-

  I just used Migration Assistant to transfer my account (including Fusion) of my old MBP to my new MBP. My VIsta 64 - bit VM Fusion is and resides on an external HARD drive. so, after the migration successful (apparently) I connected the external drive to the new machine and (ii) grown up merge.  Fusion has seen the virtual machine, I selected to motorise the. Merge request now:

  Did you move this virtual machine, or you copied it?

  It seems to me that I did, nor as the volume disk external DRIVE containing the Vista VM was not mounted at the time of migration (in fact, the drive has been disconnected). I copied the platform, including the Fusion, from one physical machine to another.

  I know this is probably an easy answer, but I don't want to blow up this very important step in getting my new machine, running and functional.  ?:|

  Help!

  Instant wrote:

  Thus, it is "moved", even if no bit VM have been transferred or altered in any way and the virtual machine remains resident in the same volume on the external hard drive?

  Yes, it's "I moved it" in order to maintain the same UUID and MAC address, which should keep the machine virtual Windows FRO Windows Product Activation trigger.

  Now to the other...

  As I pointed out in the original post, and you noted in your response, I transferred Fusion to the new machine (for the internal HARD disk) via the Migration Wizard. What should I do now? Uninstalling merge on the new machine, and then download and reinstall? (I'm on v2.04; I guess I would upgrade comes in support of w/SL v2.05...) ? Or NOT uninstall but rather update to v2.05 (easier)?

  I run the uninstall and then install Fusion 2.0.5. (Note: Fusion 2.x is not a dynamic update)  Uninstalling/reinstalling also Fusion will not delete your Virtual Machines.

• In Muse miniature slideshow container, I have images where data in image properties can be set. SEO search engines see the data and help the visibility of my site?

  In Muse miniature slideshow container, I have images where I can insert the data of image properties. SEO search engines see the data and help the visibility of my site?

  Post edited by: Howard Lower and rewrote the question because I have yet to get a response.

  Yes, they will be included in the report.

  Please check these links:

  https://helpx.Adobe.com/Muse/how-to/add-alt-text-and-ToolTips.html

  https://forums.Adobe.com/thread/1747973?start=0&TSTART=0

  Thank you

  Sanjit

• Download and activation Adobe Pro XI the new MacBook 12'

  Have Adobe Pro XI on MacBook Air and struggling to be transferred to the new MacBook 12' and I wanted to know how to do a new download on the new Mac and activate my existing serial number.

  Please visit Download Adobe Acrobat products. Standard, Pro | DC, XI, X to download and install Acrobat XI.

  Using activation, you can see Learn how to enable or disable Adobe apps.

  In the case of activation problems, you can view Adobe to solve the problems of activation and deactivation of the questions

  Concerning

  Hervé Khare

• My V5-571 CAREB is extremely slow at startup and would become very hot gel frequently

  My laptop CAREB 571 V5 running on Windows 10 is extremely slow at startup and becomes very hot, gel frequently.

  I recommend reloading the windows to see if it helps the slow and freezing. If it is not the case, I suggest that you contact technical support for repair options. I am including the instructions below to reload Windows without losing any data.

  http://Acer.custhelp.com/app/answers/detail/A_ID/37335

• New Macbook 2016 and Apple Display (Thunderbolt)

  Hello world

  I bought the new Macbook 2016 and cannot connect to the Apple screen because there is no bolt of lightning to the HDMI adapter.

  Anyone know of any other urgent solution?

  Thank you

  You cannot use the TB with your Macbook display.

• Is there a way to check out FF as the TWO webroot security and now my Bank has sent a security notification that my Firefox is not secure and can be redirected elsewhere.

  "ACTIVE PROCESS Firefox.exe has a POSSIBLE MEMORY LEAK"

  When I run an Analyzer system for WEBROOT the statement that there is a breach of security for my Firefox browser.
  When I went to access my Bank info, I get a message that redirects to a site with an invalid certificate Firefox.
  Is there a way to CHECK to see if I have a secure copy of Firefox? (Yes, I have installed through the main site.

  I TEACH technology to the public school system and have high security that updates regularly and my pc runs so regular maintenance.

  Are there addons strangers, and do a malware check with some different programs, unless that Webroot is striking firefox on a memory leak, it was 2 years ago.

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner