Helps to access http management on ASA5525

Similar Questions

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• How to access the management of VLANs with a different virtual LAN (Dell powerconnect 6224)

  Hello

  DELL powerconnect 6224 reference.

  I want to access the management of a different VIRTUAL LAN VLAN.

  The management of VLANS is 100 of VLAN. not the routing

  My computer is vlan 60 (192.168.60.10) and I want to connect via ssh or http (192.168.100.1) to manage my switch.

  Thank you for your help on the command line

  The management of VLANS on the 6224 is not routable. So, you will not be able to access VLAN 100 from any other VLAN. However, you can manage the switch from other VLAN IP addresses. So if VLAN 60 has an IP of 192.168.60.1 you can http and ssh to it. And if the VLAN routing is enabled you have access to 192.168.60.1 on the other VLAN.

  See you soon

• I can still access my Manager tasks, Shut Down, restart, sleep, and Hibernate options went on the Start Menu After uninstalling Secure browser review.

  I recently downloaded Secure browser review for a test in Spanish for a class.  I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu.  Finally, before taking the test, my computer is always locked.  This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock.  Now, it does not require a password, or it is not locked.

  I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return.  Help, please!

  Original title: Secure Browser review

  Hello

  Do a system restore, if necessary in Safe Mode, until you have installed the browser...

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  See you soon.

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• I can only access https / /: Web sites

  can someone help me with this problem, I did things like. Clear the cache, history, uncheck the proxy etc. settings. I restar my Mac in safe mode and I am able to access http / /: and https / /: web sites, this problem happened on my administrator account and not on other accounts, but just happens in all accounts. I don't remember doing something weird on my mac. I see that I am connected to WiFi, but I can't access http / / sites. any help is appreciated and thanks in advance... A better way to reach me is to *.

  < personal information under the direction of the host >

  FYI, personal information (e-mail) are not recommended to post on public forums, it is an invitation for spam.

  For your problem, try disabling IPv6.

  Goto system preferences > network > advanced > TCP/IP > Local link only

• Can't access Boot Manager

  Im trying to revive my imac 27 ". just put a new hard drive in it, im trying to boot from a copy of Mac OS x on a flash drive.

  but my problem is I have over my original keyboard, I just got a temporary Microsoft wired keyboard, although I realize now that it does not recognize. which means I can't access Boot Manager

  is there another way I can get this operating system on this machine.

  any help would be greatly appreciated.

  keyboards USB is a generic driver windows keyboards should work I use only a neutral keyboard from Microsoft

  for the bootstrapper, you must hold down the left Alt key

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• PowerConnect 2824: Can't access web management using VLAN TAG 1?

  Let's say I have port 20, which is a member with LABEL of VLAN 1, 10 and 20.

  If I try to access web management to help interface VLAN 1 TAG, it is not accessible.  However, if I remove the tag VLAN (and the default PVID value of 1), then it works fine.

  Is this a known limit?

  In addition, change the management VLAN on my 2824?  (what I read, it is not possible)

  You're right about the two statements.  The Web GUI is accessible only through the untagged VLAN 1 and it is not possible to change the management VLAN on the 2800 Series switches.  On the other upper level switches, you can use the ip address command vlan xx to move the management VLAN in the VLAN specified in the statement.

  I hope this helps.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Remote Access Connection Manager

  What is Remote Access Connection Manager and what is it?        PS. I don't know what Windows topic category and applications, this falls under, but since I HAD to choose one...  Thank you for your help.

  Hi bjeja,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  Remote Access Connection manager manages connections dial-up and virtual private network (VPN) from the computer to the Internet or other remote networks.

  If you have questions about Windows do not hesitate to answer and we will be happy to help.

• Why can't I start Remote Access Connection Manager

  I am not able to connect to internet using my 3G Broadband. I try to resolve the status of the remote access connection manager to "on the road", but the error message invites up to said "Windows could not start the service on local computer remote access connection manager. Error 1068: the dependency service or group could start. "I find the dependencies are Remote Access Auto Connection Manager, routing and remote access, Sharing (ICS) to connect Internet. I tried to put those 3 to "started", but was able to start also.

  Hello
   
  You must make sure that the underside of services are started and restart your computer and check if the problem is resolved.
   
  To start the services.
   
  1. click on start.
  2. type Services.msc in the search box and click on enter.
   
  Note: the common addiction for "Remote Access Connection Manager" and 'Remote Access Auto Connection Manager' is 'Secure Socket Tunneling Protocol Service'.
   
  Make sure that you check the properties of service no matter what you try to start, then click the dependency tab and make sure that you select the dependency registered under this service services.
   
  The dependency of 'Remote access connection manager' services include:
   
  a. secure Socket Tunneling Protocol Service
  b. phone
  c. Plug-and-Play
  d. remote Procedure Call (RPC)
  e. DCOM Server process Launcher
  f. RPC end point mapper
   
  Make sure that you try to start the Connection Manager Service dependency services automatic remote access as well.
   
  Method 2:
   
  I recommend you to update the drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the assword or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• cannot access team management

  Hello

  I bought a license for the company for creative cloud, but cannot access: https://creative.adobe.com/team/admin/ it redirects me: Adobe Creative Cloud

  What's wrong? ABO of evil? Help, please!

  Kind regards

  Björn

  You have CC for the team for one seat, that you, the user also has not accepted the invitation. You do not make any access to CC that you do not send an invitation to yourself.

  You can assign United Nations Headquarters & then send an invitation to your self. You will need to accept the invitation to access CC

  Concerning

  Baudier

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Need help, limiting access to my children.

  I built a computer for my children running Win7 what I'm trying to do so I created a user account for them. I want to make sure when they click their user account that they see ONLY their programs. No start menu to any shortcut for anything whatsoever. However, I want to connect to an administrator account and to see him regularly with all links to the operational services and ECT.  I created a user account for them and turnde on parental controls, the issue Im having is I delete a shortcut on the desktop of their account (in this case, the video utility) and enter the admin password, the shortcut is deleted in the two accounts.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I suggest to read the articles below and check if that helps.

  Implement family characteristics

  Family Safety: frequently asked Questions

  I suggest also refer to the article below and check if that helps.

  https://TechNet.Microsoft.com/en-us/library/ee623984 (v = ws.10) .aspx

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.