Hey guys, my computer was working fine, so I closed the night, the next morning, when I tried to boot the system, I never had to windows.
I'm a main file where the screen is black and the writing is white. I think it is that the original system set up that its demand. There is a press F1 for set up and a few other options then a set list of questions to answer as the date, time, etc.. I can't get out of it, I did once and am back to the window and thought I'd do a system restore point and restored to a point of 2 weeks before this happened and everything worked well, until I have shut it down again. Once again when I didn't restarted my computer I have no windows, only the main computer set up suggestions? My computer is not under warranty any longer that this is a hp pavilion a310mn
kawidirtrider,
The problem you are having is with the BIOS before Windows starts to load. It seems that if the CMOS battery may be dead. You will need to contact HP for help on this issue. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Today while I was in class, my computer has started very well and I was able to work on it as usual. When the class was done, I saved my job and turn the computer off. Not even 10-15 minutes later, I turn on my computer turn it on again to finish my job and it takes ages to start. When that finally happens, it connects me under a temporary profile. None of my school work, photos, music or whatever it is is nowhere to be found. I tried to do the repair option that is offered with the starting system normally and nothing. I also tried the system restore twice at an earlier date and its doesn't work simply do not. Recommendations on how to do, and if my files can be saved? The photos I mean a lot to me and I have midterms and all my work is saved on my profile = - /... Ouch!
To avoid problems of access to the file:
1. in safe mode, copy the files into the documents, pictures and music in C:\Users\Public folders.
2. Enter the new profile in normal mode and move public folders files in folders of your new profile. -
my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?
First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Test your player - create a Bootable CD:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticJ W Stuart: http://www.pagestart.com
-
can not restart even in safe mode
Hi Michael H. Wolf,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the articles below and check if it helps.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
http://support.Microsoft.com/kb/324103
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
-
Hello!
When I start my computer, I got the blue screen where I can usually click on the leave me in my office. Unfortunately, this icon has disappeared and I can't log my computer. The user name was not protected before. Is there something I can do to get the icon back so that I can connect to my computer? I tried to restart the computer in safe mode, but it brings me just to the same screen with a larger font.
When I hit Ctrl-alt-delete twice, I have a username but none of the passwords that I get home from work. Is there a defect that I can use?
Thoughts? Thanks much for any help you can give!
Then, it seems that your connection files are broken, perhaps because of the infection. What has changed between the time where things worked and the time, they did not? There are ways to fix broken logons, but much depends on what caused the problem. If the machine was in the store I boot with a special rescue CD and take a look, but you can't do it at home. Since you have XP, a Bart PE could help. Otherwise you should take your computer to a local professional. Do not use a type of BigComputerStore/GeekSquad of the place.
http://www.nu2.nu/pebuilder/ - Bart PE Builder
MS - MVP - Elephant Boy computers - don't panic!
-
TEAC sx-60 mouse and keyboard not recognized on my laptop but on my computer, it works fine
TEAC sx-60 mouse and keyboard not recognized on my laptop but on my computer, it works fine
It is the responsibility of the manufacturer to provide drivers. If they are not, you will not be able to get from Microsoft.
-
My computer says my windows is not authintic but I know that this is what is wrong. I have on my another desktop and it works find but not on my labtop. It was working fine before.
A single license is a single Installation.
See you soon.
Mick Murphy - Microsoft partner
-
original title: fallout3
Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago now all of a sudden after loading when I hit continue it crashes, Intel processor Core i3-2100 3.10 GHz (Sandybridge) Socket LGA1155, Asus AMD Radeon HD 6770 DirectCU 1024Mo GDDR5 Mushkin Silverline #991768 4 GB (2x2gb) DDR3 1333 MHz 9-9-9-24, thanks in advance, Morgan
Hello
1 did you change on your computer?
2 did you receive an error message?
Fallout 3 is not compatible with windows 7. See the below link for the same thing:
Method 1:
You can even check this link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows
Method 2:
However, start your computer in a clean boot state, and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
-
I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.
Hello
· Were there any changes made on the computer before the show?
· Who is the service pack installed?
Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421
-
Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.
Original title: code 10
Hello
Read this link which has also a few solutions:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/--------------------------------------------------------------------------------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My Goggle voice chat was working fine, then one day it just stopped. I tried to reload, but all I get is error 1603... can someone help me with this? I use Windows VISTA
Hello
· What is the exact error you are getting?
I suggest you follow the link and check.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
For more information I would suggest you follow the link.
http://www.Google.com/support/chat/bin/static.py?page=known_issues.cs
http://www.Google.com/support/chat/bin/answer.py?hl=en&answer=162044
-
My HP8600 Wireless will not print. It was working fine. Now he tells me offline. The offline icon is disabled. I unplugged the printer and the router. This does not solve my problem. Help
Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the HP print diagnostic utility and check if it helps.
Method 2:
Run the fixit from Microsoft Fixit article and if that helps.
Problems printing and printing errors:
http://support.Microsoft.com/mats/printing_problems/
Method 3:
Try the steps in the following Microsoft article and check if it helps.
The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer: http://support.microsoft.com/kb/2027593
Method 4:
Try the steps in the following Microsoft article and check if it helps.
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
And also see the following Microsoft Technet article.
Hope the information is useful.
-
Original title: Input device does not, worked very well last week, have not changed anythingHey all,.About 4 days ago, my microphone on my headset was working fine. Then about 2 days ago it wouldn't work when I tried to talk with my friends in Ventrilo.At first, I thought it was micro but then Ventrilo sent me an error message stating that it was in fact my input device and not my mic, so I tested my microphone on my Macbook and it works fine with that.For some reason, the two MIC (front and back) on my PC does not work, I've tested with Sound Recorder and I get a signal, but only few clicks and static. What is strange, is my mic doesn't work, but both of my sound entries are, I can hear sound through my speakers and my helmet which is plugged into the front of my PC. It's as if my PC has somehow isolated both of my microphone inputs and only them turned off but who does not seem plausible given that I don't know that the whole card wouldn't work if there was a problem with her.I have uninstalled/reinstalled Realtek HD Audio Manager.I tried to update the drivers, but they say they are all 'up-to-date '.I feel there is something wrong with control pilots the microphone inputs on my PC. Strange thing is, I haven't changed anything the week last in terms of sound with my PC. I installed a new game, but that's all.Anyone have any idea why this is happening?See you soon.
Hello
You try to run the system restore.
System restore
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
-
iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.
It will start in recovery?
-
Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.
Well, your printer is broken. If under warranty call HP.
Maybe you are looking for
-
module not found wireless (701)
Please, help me to solve this problem.After that I did the diagnostic system, I get message "wireless module not found (701).and when starting my laptop, the screen just showed HP logo and start back to the HP logo.
-
Best practices for storage and backups on internal and external drives
Hello I have a Mac laptop and I would like your advice on how to organize the storage of files on internal and external drives and how optimizes it the backup plan. From now on, my organization of file storage is: I keep my most important files on th
-
With the help of Clean up diagram with LabVIEW 8.6
HI ppl... Is there a way we can specify the parameter to clean up the diagram of operation. as the minimum spacing. Mark the position etc...?
-
PIXMA mp 280. It will not scan-error #214021. need help.
It must be my old age. I was able to use the scanner once yesterday. today not to go! Maybe I should uninstall.i not know this procedure. I tried everything I know how. I am not a technician. I'm a photographer! E-mail address is removed from the pri
-
NEED HELP FINDING THE SERIAL NUMBER
Hi, so I bought Adobe Photoshop Lightroom 6 today and I followed all the directions he asked... He never gave me the serial number to advance my installation with lightroom process. He had just created Adobe Cloud. Help me!!