Hey, newbie here. I'm trying to copy and paste a file that contains text.

Similar Questions

• I use the current trial of Acrobat DC version. I opened a PDF I created in Corel Draw by publication in PDF format. I tried to copy and paste text from it to a Word 2007 document. The copy option was available, but when I went to the document and ch

  I use the current trial of Acrobat DC version. I opened a PDF I created in Corel Draw by publication in PDF format. I tried to copy and paste text from it to a Word 2007 document. The copy option was available, but when I went to the document and chose paste, it was nothing. I then tried the same thing but sticking in a document of Corel. The same problem. It seems that the text has been copied, but I'm unable to paste it into another program. Is this real?

  Is it permanently available text? (Can highlight you)?

  This seems a strange way of working well - why not copied from the draw to Word?

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• Security How can I remove the copy and paste the files I used?

  Security How can I remove the copy and paste the files I used?

  I can't get rid of all the e-mail addresses I have copied and pasted.  No matter what I will always appear if I hit paste again.  This is a shared computer and I would rather not have my copy and paste the files stored on the computer, after that I quit.

  Thank you

  Hi Ron,

  You can copy or move information (for example, text and pictures) between files and programs using temporary storage called the Clipboard. The Clipboard is not visible, so even if you use it to copy and paste information, you never actually see the Clipboard when you do this.

  The Clipboard contains a block of information at a time. Whenever you copy information to the Clipboard, the old contents of the Clipboard is replaced by the new information.

  When you shut down the computer everything is stuck in the memory of the Clipboard is cleared.

  Please click the below mentioned link to get an overview of the clip board memory.

  http://Windows.Microsoft.com/en-in/Windows7/copy-information-between-files

  Answer please if you have any questions.

• Word Doc with graphics - trying to copy and paste

  I have a Dell laptop with Windows Vista OS, MS Word 2007. I am trying to copy / paste a document I created in Word that contains a text box and the picture to put in the body of an email or in another document. I just select all the text is selected, but the area of text and graphics are omitted. The graphics and text box are not getting selected, so cannot be copied and do not appear when pasting.  I don't want to attach the document.

  Help, please.

  Thank you
  Kristen

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word

  They will help you with your Word question in the newsgroups Office above.

  See you soon. Mick Murphy - Microsoft partner

• Trying to copy and paste a screenshot of a video game and stick it on the paint. All I get is a black screen Uni I put any graphic setting. How to paste it on Paint? I am able to do it on Vista, but not on Window7.

  Screenshots to work in painting with Windows7, unable to work, all I get is a solid black screen capture.

  I thought that is no longer a problem in the current version of Windows. In previous versions all that depended on what you were trying to catch and how it was made.

  First, make sure the game doesn't have its own ways to make screenshots. There are a lot of games that allow you to do and screenshots that are just after that saved to a folder. You must search settings keyboard... maybe you will find a similar option. What is the name of your game... maybe I can try to find this option.

  Other things... maybe it will be possible to intercept a tool cutting, then try this: when you're in the game, press the Windows key (it will open menu start without closing a game) > all programs > Accessories > capture tools > press an arrow next to new , and select full-screen Snip

• How can I copy and rename the file that I copied to another folder

  I have a file in a source file and I want to copy in a different folder.
  all these files from source have the same name and I put them in a folder which is the destination
  and I want to rename it to 1_1.txt 1_2.txt and so on.
  
  Here is my copy fuction
  
  UTL_FILE.fcopy ("FLX_SIGNATURES",
  filesource, - image source that I get using a loop above
  "DELTA_SIGNATURES,"
  filesource - destination image that I want torename
  );
  
  
  the foregoing is in a loop
  so for each filesoure, the name will be 1_1.txt for all files that have the same file name and I want to change the name of any time I copy can help you

  Dear kama021!

  Please take a look at the following link. It shows UTL_FILE. FRENAME. This should be the procuedure that fits your needs.

  [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#i1003641]

  Yours sincerely

  Florian W.

• Can I copy and paste a file of pdf Reader FF for a 2nd computer that has no FF drive?

  I have 2 computers, we have Fire Fox Reader is not. Is it possible to copy/paste using a USB key a pdf file that is saved on the computer that does not have Fire Fox Reader and be able to open and work with this PDF using Fire Fox Reader? The second computer has Adobe Reader installed.

  I already know that opens a pdf file of Adobe Reader left the 2nd computer to the first, it opens in Fire Fox Reader.

  Yes, if you save a PDF file you can open this file with any program that can handle such a PDF file.

  So if the other computer has the Adobe Reader software, then this program will be used.

• I'm unable to copy and paste a file into another folder or drive.

  * Original title: malfunction of the system

  When I copy a file to paste it in another folder or drive, it does not work. I don't know whether it is a malfunction of the system or virus?

  Hello

  I would like to know more information about the issue. Please, answer the following questions to help you best.

  1. You get the error message?
  2. The question is limited to a specific file?
  3. What anti-virus software is installed on the computer?
  4. Were there recent changes made on the computer before the show?

  To ensure that your computer is virus-free and spyware, run a scan online using the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  You can also check out the link and check if it helps.

  http://support.Microsoft.com/kb/2623670/en-us

  Please get back to us with the above information help you further.

• Copy and paste the files in Bridge...

  Hello

  I think it's a bug - but maybe I'm wrong and only I can not find the right option at the moment, but:

  If I select a photo in Bridge and copy it (Edition-> copy or CTRL + C) and want to paste elsewhere, for example in Windows Explorer, the photo does not appear to be on the Clipboard.

  I know that there is a solution to the context menu or "move to...". "and" copy to... ". "... but which is not the same. Workaround has no short cut, and very often I opened the folder target in another window (explorer) and do not want to go all the way down to her through the "copy to...". ».

  
  Also, I read in some messages that I see only the "thumbnails" in bridge and so I can't copy the file... But I can't believe that - in other programs (e.g. Windows Explorer), I also see a Visual representation of a file (a bunch of pixels) that I can perfectly copy/paste as a real object. So bridge knows the file - why not support copy / paste of it?

  Thank you

  ... How it works now. But this does not mean that it could not be changed. I would also greatly appreciate the ability to normally cut / copy-> paste the bridge as with any other regular file browser. Maybe this thread should be moved in the suggestion Board?

  Best regards

  -spitfire

• How can I copy and paste a file to any application on my e-mail address

  I'm trying to put a CV to an e-mail from a potential employment so I applied.  I can't get the process to work. Help

  If it is in a folder, you will need the ZIP folder first and then attach it.

  How did you create the resume? The best way would be to save it as a file PDF and then attach that.

• Copy and paste keyframes

  Hello

  I have a clip with a Prism on this effect with 4 key frames. As I use these pictures-4 keys several times in the video I'm trying to copy and paste, but I can't understand how do. I watched Apple tutorial , but it doesn't seem to work for me. It works with effects that represents the key images as a "curve" such as opacity.

  Here is what I tried:

  I have my 4 key frames

  

  I select 4 of them and copy them (alt + shift + c or go in Edition > keyframes > copy)

  Note that when I copy the keyframes, the Edit menu is not to highlight as it does when I copy a clip

  

  Finally I move my head to read and try to paste the keyframes by using alt + shift + v or Edition > keyframes > paste, but all I have is his Apple error

  

  I don't really know how to do this, maybe I'm missing something obvious.

  Thanks for reading,

  DevKrazy

  PPaste attributes will paste the keyframes.

• Copy and pasting of e-Learning Game brothers in Captivate

  Hello

  I have Captivate 9.0.1.320.  I created an e-learning module.  Then I downloaded the game from the Challenge of the brothers of the e-learning category.  The module and the game work very well.

  I tried to copy and paste the game into the module and that did not work.  The game displays a message about java and the game goes to the result slide (although the game is not complete).

  I saw some information on a fix, but it looks like I'm already on a newer version of Captivate where this fix is no longer applicable.

  I also tried adding an action to the last slide of my module - success open URL or file and pointing to the html version of the game.  It does not either.

  Any ideas?

  Thank you

  Here's what I found eLearning Brothers - make you for the game to download is for the course (admissible or inadmissible).  To get the download to work correctly by copying and pasting it into another file, save game file to pass the version of Captivate you can close and reopen.  It will copy/paste and work correctly.

• Copy and paste that nothing happens. Razor does not crack.

  My project file (prproj) is 606 MB in size, maybe it is exceptionally high. I have 64 GB of RAM, who is currently working for the organization taking on about 48GB of RAM. I don't see any of the obvious constraints.

  But just recently, my editing has ground to a halt, that any attempt to copy/paste or sequences of razor doesn't do anything.

  I'm about to begin the purge of the sequences of my project, I would also like to keep, to see if that helps. But on the side of Adobe, is there a limit to how many individual items in the body? Any other suggestions?

  None of my drives are full. Apart from this question things seems to take place. I enjoyed that the most recent versions of the body can handle copy/paste of several clips from multi-cames without crashing. That used to be a problem. But with this problem, just trying to copy and paste a single item and it is unable to do anything. It is not things same multi-cam, just a WAV file.

  Jim & Folks,.

  It is a plug-in audio that seems to be responsible.

  Tried to reproduce the problem with various other clips in the body, most do not replicate. Why WAV clips? Ah... because I use "Dialogue iZotope TX 5 of noise" and it seems to be maybe a strict limit on this. I will contact their support department.

  Thanks for the suggestions-Gord

  UPDATE:

  Hey, I did submit a bug report, before, I noticed the audio plug-ins, but not no trace it email. If someone in Adobe can kill who?

• Copy and paste the help.

  I'm pretty new to this design thing and I am running CS3.

  Basically, I'm trying to copy and paste from a doc on a new photoshop to create textured prints.

  I was able to do it once, and with the notes that I took, I can't figure out on my own.

  Whenever I have paste my selection since the first doc to the next, there is a white border around my selection who shouldn't be there.

  I'm missing a step between flattening and the unlocking of a layer in the first doc the next doc.

  Here's a screen shot that will probably explain this better than I. Any advice will be greatly appreciated! Thank you.

  

  The new doc has the reddish background.

  The doc on the extreme left is the only one that I can not understand how to change in a way where I can copy and paste without having this white border around my selection in the new.

  In the Middle, one has been done correctly, I just can't figure out what step I'm missing.

  What can I do to get the result I want?

  Thank you.

  Hello!  Is one simple way to accomplish what you want to use a blending mode multiply.  For example, in the document right in your screenshot with red background, you can select Layer 1, the model with the white border and change the normal to multiply in the Modes of mixing down blending Mode.  See the screenshots below.

  

  

  A layer set on multiply darkens only the lower layers, so the white border copied with the texture wouldn't appear on a red background.  You can learn more about the blend mode multiply here: http://www.photoshopessentials.com/photo-editing/layer-blend-modes/multiply/

  I hope this helps!