Process control - level review status

Similar Questions

• HFM process control

  Hi all, I have v.11.1.2.1 HFM
  
  I tried to generate custom through the HFM database reports, but I need some help with a few tables, that I have not been able to find.
  
  While in the process control panel, each time I right-click a phase that the "History of process flow" option appears. If I choose what it a pop window with the historical records of this phase are displayed. I was wondering if it was possible to find that exact or tables so that I can manually build a query.
  
  Any help?
  
  Thank you guys

  I bet they are ID numbers that correspond to a level of process just as there are for different tasks of HFM identification numbers.

  I know that in order for me to come up with the associations of the name and the ID number of the task, I went in fact through ASP pages. For example, when you go to the review task page, there a drop down which shows all types of tasks. Guess what... If you look at the source code of this page, there is a list containing the names and identification numbers.

  I'd be willing to bet that you can do the same thing to determine the process ID / name of the associations.

  While I'm not a super pro on this product, I stayed in a Holiday Inn Express last night and I hope that this opinion is not send you on another goose hunt.

  Charles

• The result collection has exceeded the maximum flood control level?

  Hi all
  
  When you run a metric on an agent, I get the following message:
  

  The following exception has occurred:
       RTMCollection: exception occurred: java.lang.UnsupportedOperationException: Collection Result Maximum Flood Control Level Exceeded

  Someone at - it any information on that?
  This measure could go back a few thousand lines in the result, so I added the "LIMIT_TO" in the file default collections:
  

      <MetricColl NAME="......."> <LimitRows LIMIT_TO="1750"/>  </MetricColl>

  However, the error is still happening...
  
  1. someone comments on the flood control message?
  2. should what nr of lines I introduce LIMIT_TO?
  
  Any comment is very appreciated!
  
  Thank you
  Ed

  Flood control settings are different from the concept of Limit_to - the concept of limit affects the output of the metric. flood control settings protect the agent against a metric producing too many lines that could theoretically allow the failure of the agent.

  So first of all, I would seriously consider the metric measures reports that more than 10,000 lines are ill-conceived likely metric.

  In order to control the parameters of flood control, they can be adjusted if necessary for testing purposes, but I wonder again seriously any metric design requiring a large volume. The parameters are:

  /**
  flood control data to control the number of rows may result in collection
  * keep. from the min, we will open a session but rejects silently new upcoming lines
  * in the result set. If we reached the maximum, the assumption is that the
  ' * ' fetchlet ' is out of control (loop?) and we will report a duration
  * statement.
  *
  * @name CollectionResults.MaximumRowsFloodControlMin
  * @type integer
  * @unit lines
  * @default 5000
  */
  private static final ConfigProperty MAXIMUM_ROWS_FLOOD_CONTROL_MIN =
  () Config.newIntProperty
  "CollectionResults.MaximumRowsFloodControlMin,"
  5 000).

  /**
  flood control data to control the number of rows may result in collection
  * keep. from the min, we will open a session but rejects silently new upcoming lines
  * in the result set. If we reached the maximum, the assumption is that the
  ' * ' fetchlet ' is out of control (loop?) and we will report a duration
  * statement.
  *
  * @name CollectionResults.MaximumRowsFloodControlMax
  * @type integer
  * @unit lines
  * @default 10000
  */
  private static final ConfigProperty MAXIMUM_ROWS_FLOOD_CONTROL_MAX =
  () Config.newIntProperty
  "CollectionResults.MaximumRowsFloodControlMax,"
  10000);

  and can be controlled via:

  emctl setproperty agent-allow_new-name-value...

  or by the emd.properties implementation and performing an emctl reload.

• Control of the status/OS-level database connectivity (* nix)

  Hi all
  
  What is the most complete of the singular* check to monitor the status "running" and "connectivity" of an ORACLE database on a Unix-like platform?
  
  Checks the State of SMON ps - ef | grep smon confirm these two statements:
  (1) database is running. and,
  (2) can be connected locally using sqlplus
  
  Or requires separate at the OS level controls? If so, which?
  
  See you soon.

  Does checking the status of SMON ps -ef | grep smon confirm both statements:
  1) Database is running; and,
  2) Can be locally connected using sqlplus
  

  If smon is running, my minimum hypothesis will be... database is started in nomount State.

  SQL> conn santu/santu
  Connected.
  SQL> conn /as sysdba
  Connected.
  SQL> shu immediate
  Database closed.
  Database dismounted.
  ORACLE instance shut down.
  SQL> startup nomount
  ORACLE instance started.
  
  Total System Global Area 1073741824 bytes
  Fixed Size                  2034376 bytes
  Variable Size             264246584 bytes
  Database Buffers          801112064 bytes
  Redo Buffers                6348800 bytes
  SQL> !ps -ef|grep smon
    ora10g 23625 23587   0 09:31:06 pts/1       0:00 /bin/sh -c ps -ef|grep smon
    ora10g 23626 23625   0 09:31:06 pts/1       0:00 grep smon
    *ora10g 23615     1   0 09:30:46 ?           0:00 ora_smon_rtest*
  
  SQL> conn santu/santu
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in progress
  
  Warning: You are no longer connected to ORACLE.
  

  Kind regards
  S.K.

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Citing long lived process control folder?

  Hello

  I have to build a long term process that begins when the xml data are filed in a folder.

  Once the XML is received, it must be entered in the form and assigned as a task of process management.

  Long-term process should be defined with an endpoint Manager task, but using looked the file to invoke the process it's a control folder...

  How can I set such a process?

  Thank you, Yan

  Hi Yan,

  in fact, the process has no need to have a task manager endpoint. Task Manager endpoint is used only if you want users to start the process from the workspace.

  For your process, use a control folder end point. In the process, the first step is surgery Assing task that uses the xml data you deposited in the watched folder (assuming that the xml is in the correct structure for the form you are using).

  Scott

• Resources approval process control

  Hi all
  
  Have two objects in resource, RO1 & RO2
  Two ROs has their own process of approval and disposition process.
  
  I have this affect resources through groups and access policies. (i.e. Group1 will call a strategy of access and this access policy, RO1 will be granted, Group2 will call a strategy of access and this access policy, RO2 will be granted)
  
  Senario:
  When a new user is created, Group1 be automatically assigns to the user. Then the RO1 approval process will be called.
  
  User then go to the "Member of the group" and Group2 menu item assign to the same user. Then, the RO2 approval process will be called.
  
  But, RO1 must be first be granted to the user, before you give RO2. (if granted before RO1 RO2, then error will be fired)...
  
  So if the RO2 approver approves the request before the RO1 approver approves its approval, error will occure.
  
  So what I wanted to do are to control this flow or approvals.
  
  Currently, I have no solution or idea for this.
  
  Is there a way to stop the process of approval of RO2, until approval of the RO1 granted?
  
  Help, please...
  
  Kind regards
  Chaturanga

  It depends on a little bit of what your needs are.

  You can refuse the request of RO2 (as stated Rajiv) or you can put RO2 in readiness until the moment where RO1 is approved. The easiest way to implement the second requirement is to put a brake in the provisioning code service that checks whether all the pre reqs are met and if not locks the task in readiness. Create a scheduled task that "harvesting" tasks stuck in commissioning and checks whether the task can be released.

  Hope this helps
  / Martin

• Receive the error message "the system c:\WINDOWS\system32\services.exe process terminated unexpectedly with status-1073740972 code".

  Original title: c:\WINDOWS\system32\services.exe

  I get: the system process c:\windows\system32\services.exe ended unexpectedly with the code of State-1073740972. The system shutdown will be present and reboot. It's driving me crazy! Help! PLEEEASE

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  How to configure Windows XP to start in a "clean boot" State

  Hope this information helps.

• Stop: c000021a {fatal system error} the windows Logon Process system process ended unexpectedly with status 0 x 40000015 (0x00000000 0x00000000) the system has been shut down

  My husband must have some kind of bug in his computer as Kaspersky Internet Security, when he went on the internet, gave him a choice to block something that was causing a problem.  When he clicked "Block" - he got the BLUE SCREEN!  Is anyway for him to cancel it and save all her pictures on his computer?

  It has a Dell Dimension 8400 computer about six years.
  ----
  Sorry to bother you, but this time we did shut down his computer and restarted everything was fine.  Apparently he had clicked on something like 'do not allow' or however its formulation that I do not see.  So now we have to probably save photos and things out of his computer and take out the drive to reinstall Windows XP because there still be some sort of bug in there because we are getting popups saying some program are eager to enter the passwords section.  I don't know much about it but try to fix it!

  I looked into Kaspersky and ran a browser Configuration and analysis of the vulnerability in his computer and found that there was a kind of 'control popup' in Internet Explorer that had been added in the settings of the pop-up window. -I deleted who.

  I saw a setting in Kaspersky has been changed by default (they say "changed by the user, but did not change). -I have put all Kaspersky setting at default.

  So now, we hope the computer that my husband will work very well in the future because it's good now, even after rebooting.

  Now, we will have VERY serious about all of his photos on his backup external hard drive!

  If we have more problems with that, I'll be back but for now, everything is GOOD!

• process control of a host linux in vFoglight

  Hello:
  I am currently able to monitor the process for my Windows VMS by following these steps:
  VmExplorer open
  Expand virtual machines under topology
  Click the virtual machine, and then click the process tab
  Click the Configuration Wizard to host and run the wizard enter the administrator username and password and you sure
  Windows is the chosen operating system and ensure the collection of processes enable for this host is checked. Click Next. Make sure that WMI is checked.
  And then you click on finish. In about 15 minutes, I am able to see the processes running on the computer, etc.. I don't need to install a
  Foglight agent components.

  Now when I try and do the same thing with a linux host, that I'm not always able to see one of the running processes. To the linux host I follow these steps:
  VmExplorer open
  Expand virtual machines under topology
  Click the virtual machine, and then click the process tab
  Click the Configuration Wizard to host and run the wizard by entering in the root username and password and you sure
  Linux is the chosen operating system and ensure the collection of processes enable for this host is checked. Click Next. Make sure that the
  SSH port is set to 22. Click Next. And then you click on finish. After waiting for a long time, nothing never appears. I am able to ssh to this virtual machine
  of all over my network.

  So, it is possible to monitor the process in a Linux VM (without having to install an agent) as I can monitor a Windows VM?

  Thank you.

  Mark

  SSH enabled for the root user?
  If you go on the dashboard of the comment process within the vFoglight console (left under Homes Board) see you alarms in the upper right?
  If so, say the alarm?
  Can solve you the VM name that is presented in the machine vFoglight vFoglight? If the name is larry.mydomain.com in the vFog console, I need to make sure that I can ping and resolve this computer of the machine vFog.
  -Larry

• How to get the battery level and status in the cpp file?

  Hi all

  BatteryInfo class so I can I know how to get the battery level and the State in .cpp class?

  Hi Benecore,

  I have Add method below,

  #include

  But I only variable BatteryInfoPrivate not get variable BatteryInfo. You can also check on your side.

  So let me know how to get batteryInfo instance?

• App review status

  Hello

  I post an app for BlackBerry AppWorld more than a week ago.

  Do you know how long it takes to receive a feedback?

  Or is it possible to get contacted for whether an action is required on my side?

  This is my first submission and I feel a little lost

  Thank you in advance!

  N.

  It sometimes takes more long, sometimes shorter.

  Maximum duration is 2 weeks to process the application.

  Also, I sometimes have to wait loooooong...

• How to control the ios status bar?

  I've seen a number of questions unanswered status bar, and I'd like to hear the answer? Chris.Campbell maybe?

  I have this in my xml file

  landscape of < aspectRatio > < / aspectRatio >

  direct < renderMode > < / renderMode >

  < autoOrients > false < / autoOrients >

  true < fullscreen > < / full screen >

  and the status bar is on ios 9 (not there on ios 8)

  Tried to add

  			< key > UIViewControllerBasedStatusBarAppearance < / key >
  			< false / >

  and it has no effect.

  How to get rid of him?

  solved by upgrading air sdk

• Software version control / level of patch management

  Hi all
  
  I have spent a bit playing with the enterprise version of hyperic (seeking to replace nagios monitoring of our 250ish windows/unix servers). I can't find a feature that may be critical for us - Version control.
  
  IE. We agree with software foo with patches bar1 and bar2 be in our environment.
  
  Any ideas on how this can be achieved would be appreciated.
  
  MJH

  MJH,

  You are right, the plugins versions for you as part of the automatic detection report. And you can create a group of a given type of resourcce across all your machines to give you information, reports and alerts that apply to all instances of just that software.

  What is the updates, since you can't use puppets, you can create alerts based on the version that Stacey pointed out, and you might consider using a script that the fix or upgrade. This script can be triggered manually by you when you are alerted of a version number or automated via your link of your script to your version change alert.

  For example, you upgrade/patch system, then set an alert for you say all the systems that do not match this version. You upgrade/patch all machines not this version.

  Let me know if this helps.

  -jeremy

  Post edited by: jeremy

• Running process control

  I have a button of execution that makes a shipment. I have a 'After Submit' process that the below code to run a report.
  Some of my reports take a little time to run and I find some of my impatient users hit the button several times and it seems to create some problems in the database. Is it possible to have the enforcement process when the user press the run button, but not yet to the end after 'apex_util.download_print_document' report view?
  
  () apex_util.download_print_document
  p_file_name = > l_form,
  p_content_disposition = > 'attachment ',.
  p_application_id = >: APP_ID,.
  p_report_query_name = > nvl (l_report_query_name, l_form).
  p_report_layout_name = > nvl (l_report_layout_name, l_form).
  p_report_layout_type = > 'rtf ',.
  p_document_format = >: P507_OUTPUT_FORMAT);

  Something along those lines might work

  Create a page element hidden named RPT_STATUS
  Change the process of the page with the call to apex_util.download to be

  apex_util.set_session_state('RPT_STATUS','N');
  apex_util.download_print_document(
  p_file_name => l_form,
  p_content_disposition => 'attachment',
  p_application_id => :APP_ID,
  p_report_query_name => nvl(l_report_query_name,l_form),
  p_report_layout_name => nvl(l_report_layout_name,l_form),
  p_report_layout_type => 'rtf',
  p_document_format => :P507_OUTPUT_FORMAT);
  apex_util.set_session_state('RPT_STATUS','Y'); 
  

  Define a process to request with the name "GETREPSTATUS" with the following code

  begin
  htp.prn(v('RPT_STATUS'));
  end;
  

  Change the JS has suggested earlier to be

  CITY