Hi all, I have a HP Pavilion DV6, is stopped reading DVDs and now reads CD HELP Please!

OK so I have a HP Pavilion, about 3 days ago, that he has stopped reading DVDs now it only reads CD? Any help is appreciated

Thanks in advance John.

Data sheet: HP Pavilion DV6, Windows 7 Home premium, 3 GB ram, 277 GB HDD main, 21GB HARD drive named RECOVERY, 99 mb HARD drive named HP_TOOLS, ATI HD4250, ATI hd5470, amd turion x 2, wifi all the ordinary, dongle bluetooth etc.

Thanks again!

If the Microsoft Fixit does not correct the problem by removing the upper and lower filter drivers, then the device is not so fully operational...

It's aid. Now, you know that it must be repaired or replaced.

To fix your DVD player, there is no silver bullet through the ethernet. Of course, if you want to be Mr. Fixit, just find out what laser is bad and replace it.

Tags: Notebooks

Similar Questions

  • HP Pavilion dv6 problem. Computer off with warning message. Help, please.

    My HP Pavilion dv6 notebook PC is a little over a year old and has this problem: when I unplug the charger, the computer dies at random. It turns off without warning and won't turn on until I put the charger in.

    The battery can last 20 to 80%... or it's what he sees when it restarts.

    Where is the problem? battery or hard drive?

    Help me / give me advice in any way you can please!

    Thank you!

    Thanks for the follow up, if I feel sorry for the results you had. Visit this link for information on buying a spare battery.

    Please let me know if I can be to continue his service.

  • I have a HP Pavilion dv6 Notebook PC that goes to sleep a minute after not useven but on ac powe

    I have a HP Pavilion dv6 Notebook PC, which is only several months old.

    When you use the power of my screen keeps going sleep after 20 seconds of non-use. I then have to sign in each time

    How can I fix this please?

    Hello

    Open windows control panel, open personalization, click on the link of the screensaver at the bottom right and in the next window, set the 'Wait' time to 15 minutes and Remove the tick in the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the setting.

    Then again open windows control panel, open Power Options, click Change settings next to your currently selected diet plan plan and set the time to "turn off screen" (for the battery and Plugged In) to 20 minutes.  In addition, set the time to "Put the computer to sleep" (again, in two areas) to you will find more acceptable as long as values that you set values is more than 20 minutes (or you can set one or two boxes forever to prevent sleep in total).  Once finished, click on the button Save changes to keep these new values.

    Kind regards

    DP - K

  • I have a hp pavilion dv6 with factory warranty. It covers replacement of the battery and the keyboard?

    Hello

    I have a HP Pavilion dv6, who currently holds the factory warranty. I was wondering if she covered with a replacement keyboard, because some of the keys that I use rarely become loose, as the right alt key. I was also wondering if she covered with a battery replacement, because it is the life is much shorter than he was when this laptop was new.

    Oh, and if it does not cover the replacements for the two parties, how could I do to obtain replacements?

    Thank you

    Michael

    OK, you're in good shape, for the battery, so that we will send it to you free of charge if under warranty - ask that if they send the keyboard as well, some models are replaceable by the end-user.

  • I have a HP Pavilion dv6-2088dx, and the power light flashes constantly, that means?

    Help.

    I have a HP Pavilion dv6-2088dx and have had for a little less than two years now.  About 8 months ago, I replaced the original battery with a long life Rayovac battery.  Recently my laptop power light has been constantly intermittently to about 1 flash every 2 seconds, regardless of the level load and/or if its plugged to the power source.  What exactly my computer is trying to tell me?  Thanks for the help in advance

    -Kyle

    I found the link to your question.  I hope this helps.

    http://h10032.www1.HP.com/CTG/manual/c01884775.PDF

  • HP pavilion dv6: HP Pavilion dv6 has stopped working

    Hello

    I have a HP pavilion dv6 i7 - 4 GB RAM model, I bought in 2011. The laptop worked fine until yesterday. But a sudden power cut has caused its judgment as the back of the battery is close to zero. But later when I tried to load and restart, the laptop simply did not. I can see the charge works very well, but none of the lights (power, caps lock, etc.) are on.  Even after using the old method of draining any static battery in the laptop (by pressing Start button / stop for nearly 30 secondds), the portable computer simly does not start. There is no visible boot, that nothing displayed on screen as the laptop itself is not able to start.  I tried to reset the RAM by removing and re - install in accordance with the procedure prescribed by HP. But, still no effect.

    (There is no previous repair/replacement in my laptop. Thus, all parts are those which are authentic HP)

    The situation is completely distraught for me because nothing is displayed on the screen. I have no idea if the laptop is under tension, or not. Although I tried restarting without battery. The results were the same.

    Any help would be appreciated.

    Thank you.

    Hi @Durvank_Yewle,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6 Notebook and laptop does not turn on. Try perform a reset.  There are many tips here.

    When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

    Plug the adapter into a different wall outlet. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

    Here is a link to computer does not start for Windows.

    Here's a video that might help. It shows you how to reinstall the HARD drive, which is sometimes useful.

    Please let me know how it goes.

    Thank you.

  • HP pavilion DV6 1030us stop and restart spontaneously

    I bought a HP pavilion DV6 1030us in June 2009, and the Bios has been updated to the latest F24A.

    However, during the laptop running, it will be sunddenly stop stop and try again.

    This unexpected shutdown just looks like all of a sudden power loss and happens at random, at least, I can't find a rule.

    For most cases, this closure comes without blue screen, and it is independent of the operating system.  I tried to install windows 7 64 bit, windows 7 32-bit, vista 64 bit, xp 32-bit, all OS such a problem.

    I don't know if other users with this template has such a problem. I got tired of what I do, still can not solve the problem.

    I suspect that the Bios has a problem. I hope that HP will release a new very soon.

    BTW, if I update the BIOS, it erases the old BIOS completely first, then write in the new?

    Thanks for your attention!

    Hi guys,.

    During the Christmas holidays, I did real progress to find the cause of the problem of restart suddenly.

    I am so anxious to share my experience with you all.

    As I mentioned before, when the first time I sent my laptop for repair, they replaced the hard drive, and nothing improved.

    And the second time, I asked to replace the motherboard.

    Unexpected, the reboot problem remains after changes to the motheboard, I've been very frustrated by such a result, I even thought that maybe this laptop is never fixed.

    Then I started to search the Internet once again and a few posts point to the power supply and one point in the strip of memory, but memory defective barrette syndrome is different. And if my memory went all kind of test without any error, including windows memory diagnostic tool, memtest86 + 4.00 and the diagnostic tool memory in the bios setting.

    in such a situation, I doubt that the power supply has a defect. but I can do nothing with it. I think maybe I make a memory module to avoid the will of power help (I have 2 * 2 GB memory module).

    Unexpected, after that I got a good memory, restart occurred more frequently.

    Then I suddenly realize if this memory module has problem, so I took it and put in another. and with the 2nd memory module, the problem of restart never happens so far.

    To confirm this, I repeated this experience (I'm a sicentist in biology, I know that to reach a conclusion, the result must be reproducible). And this is the case, restart happened frequently with the first memory module and never happens with the 2nd memory module.

    now, I should mention that this module model memory is: MT16HTF25664HY - 800 1. Then, do not lack of HP.

    So if you suddenly have the reboot problem and if you do not find the reason, and even if your memory module has passed the test, you should try to replace it to see what happens.

    If this post helps you solve your problem, pls post your result here to help more people in despair with such a problem.

  • HP pavilion DV6 Notebook - Windows 8 DvD 6 question

    Hi, I have a HP pavilion dv6 notebook PC.
    System ID - 1657
    Product Id - AB5 # LQ395PA
    I upgraded to Win 8 and since my Player DVD has stopped working. In Device Manager, I get the below error
    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

    I tried to uninstall and update the drive but get the same error and also tried to update the driver as well, but it also did not work. Please help on how to solve this problem. Thank you.

    Hello

    Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.  Although Windows 8 is not mentioned, the registry keys must be the same.

    http://support.Microsoft.com/kb/982116

    Kind regards

    DP - K

  • I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error.

    I can't get all the connections. HP Pavilion laptop g6 was working fine and then just stopped to say the connections of the error. I tried everything I could but to no avail.

    Hi Sheryl,

    more information is needed for a better response from the community.

    Here's a generic convenience store to try:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    B Eddie

  • Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud ,

    Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud is it possible to LR5 LR6 to? Thank you very much.

    Jeffrey

    Yes, you can buy Lightroom without subscribing to Adobe Creative Cloud.

    To purchase an upgrade to Lightroom 6 from a previous version, please see this link: products .  Scroll to lightroom and click 'buy '. Then click on the selectable text next to "I want to:" and select "upgrade". In the drop-down list, select the version that you are upgrading.  I hope that help.

    Best regards

    Guinot

  • My music files have changed in WMA format in Windows Media Player, and now my MP3 player won't play them.

    My music files have changed in wma format in windows media player, and now my mp3 player won't play them.  can anyone help please.

    original title: Media Player

    Download and install WMA to MP3 Converter, then install it, you can get it here... http://www.WMA-MP3.org/

    Then select all the WMA files you want to convert, and then convert them to the MP3 Format.
    The reason why they are WMA is because when you ripped the files on the disc to your pc, by default, Windows Media Player is configured to save in the Windows Media Audio (WMA) Format.
    This default can be changed by opening Media Player and click on Tools > Options
    Then select the Rip music tab
    Format: select MP3 from the drop-down list.
    Click apply and OK.
    Now the next time you rip a CD on your drive hard it will be automatically saved as an MP3 file.
  • I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

    I am trying to install the service Pack 2 or 3... they are all two generate error message: EXPECTED VERSION OF THE PRODUCT NOT FOUND... Help, please. Thank you.

    George in San Diego

    Assuming that Windows XP has been reinstalled just for some reason any...

    HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

    HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
    http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • At work, my photoshop CS6 is printing so slow, it takes up to 1 minute to produce printing. We have a printer Canon Imagepress C700. What can be the problem? Help please, anyone!

    At work, my photoshop CS6 is printing so slow, it takes up to 1 minute to produce printing. We have a printer Canon Imagepress C700. What can be the problem? Help please, anyone!

    Tells us that the problem is in the printer itself or the printer driver - because Photoshop and InDesign do not share any code to print (they don't use even the same APIs to print).

  • Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

    Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

    Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

    You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

    # 11. https://forums.Adobe.com/thread/1714695

    If this isn't what you want to do, you have to reinstall.

    Gene

  • Hi, I have a subscription in photoshop and creative cloud which includes the luminous room. but he asks me a serial number now; can anyone help please?

    Hi, I have a subscription in photoshop and creative cloud which includes the luminous room. but he asks me a serial number now; can anyone help please?

    Help creating cloud / Cloud Creative applications request serial number

    https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html

Maybe you are looking for