Hi all, ready for a quick mask of a novice ;-) question?

Similar Questions

• CS4 quick mask works not properly - opacity

  I can't get the quick mask to work properly in photoshop. Every thing I try to hide, and then copy ends up having an opacity of 50% or more. All layers are at 100% opacity, and in the quick mask options opactiy is also 100%. Anyone know what could be the problem?
  
  Thank you

  the opacity for the quick mask setting is for preview only, to show you the overlay rubylith different opacity levels. What you describe sounds when you draw with a 50% or more opacity brush or with 50% gray. Try painting with black to 100% opacity.

• HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

  Contact HP support.
  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=8600#n251

• Volume in ' ready for recovery "State, I can do all the time?

  Hi all,

  I have a vpshere 5.1 with 4 discs on 2 logical volumes (2 raid 1). The server is an hp proliant ml310 with a b121i raid controller. In volume 2 where is located the data store 2, I get a health WARNING "ready for recovery" disks 3,4. I know the cause, I made a mistake and putted from disk 4 non-stop off the coast. They are not the hot-pluggable drives so when all of a sudden, I realize that, in Bay 4, there was a disk I stopped all the esx and cold reinserted the disc. All esx restarted without problem, I think that raid automatically rebuild volume but... I have this warning... now, can I do something and stop the raid server and repair of utility? I need the server h24 work... is there a way to tell him ' ok, recovery of volume? I don't have a vcenter, it's a free edition.

  Thank you.

  Alex

  Not sure, but if you don't have the HP ESXi edition (or the boot utility offline) installed, you can check the hpacucli command-line utility can help you!

  André

• Very strange problem with quick mask

  Hoping someone can help me with a very strange problem that just started to happen when I enter the quick mask in PS CS5. Let me guide you through the problem.

  (1) I opened my image in PS, go in the Mode mask quick and 'paint' my image in translucent red with a brush (100% of opacity, brush, etc. normal mode).

  

  (2) once I fully painted my picture in translucent red, I leave the Quick Mask mode and the area outside the translucent red is selected. I hit M for the marquee tool, right-click on the picture I have just painted and choose 'Select inverse', which then selects everything within the translucent red area (note that I made this a million times over the years).

  

  (3) my image is now selected. In general, what I do now is cut (cmd + x) that selected the image and paste it into another canvas, generally where is my biggest project. Whenever I did it, the image cuts and fits exactly as it is seen and leaves an empty space in the original image. However, when I cut it now, it seems to cut a transparent version, leaving behind a transparent 'ghost' of the original image.

  

  (4) then when I paste the image cut in a new canvas, it is transparent as a default value.

  

  I checked the transparency of all the paintings, and they are set to 100%. As I already said, I cut from images of no solid media using the quick mask all the time and it's never happened before. In fact, I made this weekend and it has only just begun in the last hour, so I think I clearly something clicked or activated a parameter without realizing account!

  In considering this explanation, I hope someone knows what is causing my pictures to cut and paste transparent after that I used the quick mask. It certainly is driving me crazy!

  Any advice or assistance would be most appreciated.

  Thank you

  In your first screenshot the color of foreground in the Toolbox is not 100% black (RGB 0,0,0)

  Until you try the quick mask, press D to set the foreground on black (RGB 0,0,0)

• You can use the range of colors in quick mask mode?

  I like to use the color range and the use of masks is quick to make a selection, but when I enter the Quick Mask Mode, I can use is no longer color range. I want to be able to do is:

  1. Enter the quick mask
  2. Range of colors allows you to make a selection
  3. Specific areas of this selection, I want to use as a paint mask
  4. Quick mask out of having my spiffy painted areas as the selection

  If all thinking is possible? I'm in CS6, and I've been looking to make this option available for years.

  No, range of colors will not work. It should be greyed out, otherwise you'll be sampling your mask and your image.

• Mask of composite and grayscale to switch to Quick Mask mode: problem

  Hello.
  I have a problem with this command: "toggle the mask composite and grayscale in quick mask mode"

  I know that I have to press the tidle "~" to activate it, but I use a keyboard Azerty (Belgium) and I struggle with it.

  The only way I can use the key on my keyboard tidle is to press "Option + n" keys.

  So in Photoshop, I load a channel selection, turn into 'Quick Mask mode' and press "Option-n", but nothing happens.

  If I try with 'Command + Option + n', I open the window for a new document.

  I tried all combinations of keys, but nothing has worked.

  I also tried to change the key for Britain, United States, etc., but it still does not work.

  I use the English version of Photoshop CS6 (subscription) and a keyboard Azerty (Belgium) on a Mac Osx Snow leopard.

  How can I solve this problem?

  
  

  In QM view, click on the eye on the left of the RGB channel thumbnail to do the same thing just by pressing the tilde key.

• Firefox beta 35. not ready for prime time.

  I spent all weekend trying to get the beta version of Firefox 35 to work. What I found is that * extensions of all it does not work with the exception of the maintenance of the premises. I can't download any extension that Firefox is so famous. The error is something like "unable to install"plugin-name"in its current state." Activation of any extension requires a FF reboot, same places maintenance. Try to remove an extension fails and must be done manually.

  I'm on Windows 7 Premium desktop Firefox 32 bits. I've 'committed' myself to 35 FF last night (which means history and cache out of settling because did not work it extension "expire history by days'), when I found out that 35 played well with some sites using Flash. It was a capricious thing. Many sites worked as usual, but some would not. Examples:
  http://www.Wunderground.com/us/Wi/La_Crosse.html

  http://www.weather.com/weather/5day/l/Hustler+Wi+54637:4:us

  First time I have had a problem with a version beta of Firefox, but it's definitely not ready for prime time. I realize FF tries to get away from what we call 'Exclusive Modules' but 35 FF in its current state just fill in Support of Moz forums with millions of complaints (guess I'm one of the first). I now have 1 extension (the only one that works on 35), the above mentioned "Site Maintenance".

  I thought you might like this report as 'user input '. God knows I've tried... I have downloaded 35 at least a dozen times and then was forced to 34.0.5. So I'm back on 34.0.5

  I presented a report bug here:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1108196

  I would like to know if anyone else is having these problems or anyone needs more information. I'd love to help solve this problem. I know that some of you good support people have probably tried to 35. You experience the same difficulties?

  Here is my (34.0.5 but it's the same as I had about 35 last night, with the exception of 'Version') troubleshooting information less 1 million admissions for my printer:

  The application databases

  Name: Firefox
  Version: 34.0.5
  User Agent: Mozilla/5.0 (Windows NT 6.1; rv:34.0) Gecko/20100101 Firefox/34.0
  Windows multiprocessing: 0/1

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Housekeeping
  Version: 1.3
  Enabled: false
  ID: [email protected]

  Graphics

  Description of the adapter: NVIDIA GeForce 9400 GT
  Drivers: nvd3dum nvwgf2um, nvwgf2um
  RAM card: 1024
  ClearType settings: Gamma: Structure of 2200 pixels: ClearType B level: 50 improved contrast: 300
  Device ID: 0 x 0641
  Direct2D Enabled: true
  DirectWrite Enabled: true (6.2.9200.16571)
  Driver date: 19/12/2013
  Driver version: 9.18.13.3221
  GPU #2 Active: false
  GPU accelerated Windows: 1/1 Direct3D 11 (OMTC)
  SubSys ID: 304619da
  Vendor ID: 0x10de
  WebGL Renderer: Google Inc. - ANGLE (NVIDIA GeForce 9400 GT Direct3D9Ex vs_3_0 ps_3_0)
  windowLayerManagerRemote: true
  AzureCanvasBackend: direct2d
  AzureContentBackend: direct2d
  AzureFallbackCanvasBackend: Cairo
  AzureSkiaAccelerated: 0

  Important change preferences

  accessibility.typeaheadfind.flashBar: 0
  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size_cached_value: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.Disk.smart_size.use_old_max: false
  Browser.cache.frecency_experiment: 3
  browser.places.smartBookmarksVersion: 7
  Browser.Search.Suggest.Enabled: false
  browser.search.useDBForOrder: true
  Browser.sessionstore.Enabled: false
  Browser.sessionstore.max_tabs_undo: 0
  browser.sessionstore.upgradeBackup.latestBuildID: 20141126041045
  Browser.Startup.homepage: http://www.wcwcw.com/
  Browser.Startup.homepage_override.buildid: 20141126041045
  Browser.Startup.homepage_override.mstone: 34.0.5
  browser.tabs.loadInBackground: false
  Browser.urlbar.AutoComplete.Enabled: false
  dom.indexedDB.enabled: false
  dom.mozApps.used: true
  DOM.w3c_touch_events.expose: false
  extensions.lastAppVersion: 34.0.5
  font.internaluseonly.Changed: false
  general.autoScroll: false
  GFX. Direct3D.last_used_feature_level_idx: 1
  keyword. URL: https://www.google.com/search?q=
  Media.GMP - gmpopenh264.lastUpdate: 1413301734
  Media.GMP - gmpopenh264.version: 1.1
  Media.GMP - manager .lastCheck: 1417991594
  network.cookie.cookieBehavior: 2
  network.cookie.prefsMigrated: true
  places.database.lastMaintenance: 1418059778
  places. History.expiration.transient_current_max_pages: 80511
  plugin.disable_full_page_plugin_for_types: application/vnd.fdf,application/vnd.adobe.xdp+xml,application/vnd.adobe.xfdf,application/pdf
  plugin.importedState: true
  plugin. State.np32dsw: 1
  plugin. State.npdeployjava: 0
  plugin. State.npgoogleupdate: 0
  plugin. State.nppdf: 2
  plugin. State.npwatweb: 2
  privacy.clearOnShutdown.cookies: false
  privacy.clearOnShutdown.formdata: false
  privacy.clearOnShutdown.offlineApps: true
  privacy.clearOnShutdown.sessions: false
  Privacy.CPD.cache: false
  Privacy.CPD.Cookies: false
  privacy.cpd.offlineApps: true
  Privacy.CPD.sessions: false
  privacy.popups.showBrowserMessage: false
  privacy.sanitize.migrateFx3Prefs: true
  privacy.sanitize.sanitizeOnShutdown: true
  privacy.sanitize.timeSpan: 0
  Security.disable_button.openCertManager: false
  Security.disable_button.openDeviceManager: false
  Security.warn_viewing_mixed: false
  Storage.vacuum.Last.index: 1
  Storage.vacuum.Last.places.sqlite: 1415513129

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.7
  Version: 4.10.7

  NSS
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSSMIME
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSSSL
  The expected minimum version: 3.17.2 based ECC
  Version: 3.17.2 based ECC

  NSSUTIL
  The expected minimum version: 3.17.2
  Version: 3.17.2

  Experimental features

  Good news, friends... and thanks for holding my hand during all this time. I mainly need to know if my problems were me. global or all just... and perhaps others with some configurations.

  I am now on 35.0b2 (not sure how that happened). Anyway, I downloaded beta, that is, reset Firefox, added my cookies.sqlite and permissions.sqlite, has spent half an hour in the 'options', and then checked things and seems to be back in the game!

  Thank you and best regards,
  Axis

• Satellite 4090 BIOS number - message "ready for the update BIOS... ' appears

  Hi all! Excuse my poor English because I'm french.

  A friend gives me his cell phone (a Satellite exactly 4090CDS) because he had a problem.
  In fact, the problem is that when I turn on the computer, I have a single message (not even the toshiba red logo) that is "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward."

  So I go to the french site of toshiba, in the BIOS download, I find that I must download this update: http://support.toshiba-tro.de/tools/bios/satellite/4030-4060-100/bios_820.zip

  OK, I download and unpack it on a floppy disk and I start the laptop with the disjette, he said that the update has been successful and it restarts automatically.
  This time, the Red toshiba logo appears, but then I have a black screen with a message:

  Bad checksum (CMOS) *.
  Check the system. Then press the [F1] key.

  And after that, I can't do anything, not even, press F1. If I restart the laptop, I myself meet once more with the first message «Ready for the update of the BIOS...» "and it's still the same.

  If someone could help me understand what the problem is, that would be fine.
  Thank you.

  Bastien.

  It sounds as if your CMOS chip has a problem. It is possible to s that the CMOS battery has failed and the BIOS settings are lost.
  Maybe the RTC battery is empty. In this case, you should connect the AC adapter to charge the battery of the CCF.
  Please note that the RTC battery (CMOS battery) can be fluffed once the main laptop battery has been recharged. In this case, the charge process may take several hours.

  But if after this long process of load this message appears again then I guess the battery is dead.
  I suggest that you only contact your ASP closest to get your phone checked.

• The device, \Device\Harddisk2\D, is not ready for access yet.

  Event Viewer has many entries of error ID 15, which States:
  The device, \Device\Harddisk2\D, is not ready for access yet.

  What does that mean?  Is this an indication of imminent drive failure?

  Hello

  ·         Did you of recent changes to the computer before the show?

  Method 1: Check that all connectors (power and IDE) should be firmly fixed. Disconnect and reconnect to check.

  Method 2: As short-term solution, try to shut down the system, turn the power off, turn on the power and restart. If the device still does not work then it is probably a problem of material, the device or card/main controller card (or possibly the cable connection) will need to be replaced. If the device seems to work then this indicates a problem of software or firmware. Do not forget that the problem can recur again unless the root causes addressed.

  Method 3: Update the latest version of the device driver (if there is one).
  Check on the Web site of the vendor for a newer driver and if it is available then load it.

  Reference: http://support.microsoft.com/kb/283658

  Method 4: Enforcement Procedure in Windows XP check disk errors

  http://support.Microsoft.com/kb/315265

  CHKDSK warning:

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• drive not ready message "the drive is not ready for use check the a drive, etc.".

  as soon as I connect my camera to transfer the photo I get following message

  The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

  I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

  Hello

  What is the number and the model of the computer?

  You have the computer floppy drive?

  Were there any changes made on the computer before the show?

  Follow the steps:

  Method 1:

  Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

  Method 2:

  Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• HP Pavilion 2910US all drivers for XP SP3

  could someone help me... pleaseeeeeee I need all the drivers or the post to find...

  Intel Chipset Installation Utility:

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36880.exe

  Intel graphics card:

  FTP://ftp.HP.com/pub/SoftPaq/sp38001-38500/sp38326.exe
   
  =================
   
  MS UAA for XP SP3 (before Conexant):

  http://couponmeister.com/blog/HD_Audio/KB835221.exe

  Conexant Smart Audio 221:

  http://www.mediafire.com/?lgiwcooxdkk

  Unzip into a folder, use Device Manager.
   
  In Device Manager, right click on 'Audio device on Bus High and Def', choose Update driver,
   
  Not to communicate,
   
  Install from a list or specific location,
   
  Select don't search, I will choose the driver to install.
   
  For the hardware Type select 'show all devices '.
   
  Remove control "Show compatible hardware" and click on 'disk '.
   
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
   
  Ignore XP when it complains.
   
  Reset.
   
  ======================
   
  Use your Vista drivers for HP Quick Launch, Alps Touchpad, Ricoh and Marvell Yukon Ethernet card reader... CyberLink you Cam also works in XP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093&LC=en&DLC=en&cc=us&product=3747188&lang=en

  =================
   
  Windows Installer 3.1 (necessary before wireless):

  http://tinyurl.com/9cg2y

  Intel Wireless:

  FTP://ftp.HP.com/pub/SoftPaq/sp40001-40500/sp40120.exe

• PS CC 12.5 crashed by using new quick mask and reverted back to the Version 2015.1.2 20160113.r.355 2016/01 / 13:23:59:59 CL 1059143 x 64

  I was using the new Quick Mask mode and the program crashed twice. After the reboot, the second time PS reverted to the previous version. Help

  Here is my info on my system.

  Adobe Photoshop Version: 2015.1.2 20160113.r.355 2016/01 / 13:23:59:59 CL 1059143 x 64

  Operating system: Windows 64-bit 10

  Version: 10 or higher

  System architecture: Intel CPU Family: 6, model: 13, Stepping: 7 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 3602 MHz

  Built-in memory: 32717 MB

  Free memory: 21045 MB

  Memory available to Photoshop: 29459 MB

  Memory used by Photoshop: 70%

  Range of modifier: enabled.

  Space design: disabled.

  Work plans: enabled.

  Multi-frequency 3D printing: disabled.

  HighBeam: disabled.

  Tile image size: 1028K

  Image cache level: 8

  Overview of fonts: medium

  TextComposer: Latin

  Display: 1

  Limits of the display: top = 0, left = 0, low = 600, right = 960

  Display: 2

  Limits of the display: top = 0, left = 960, low = 800, right = 2240

  OpenGL drawing: enabled.

  OpenGL allows old GPU: not detected.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  AIFCoreInitialized = 1

  AIFOGLInitialized = 1

  OGLContextCreated = 1

  NumGLGPUs = 1

  NumCLGPUs = 1

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. IsIntegratedGLGPU = 0

  glgpu [0]. GLMemoryMB = 2048

  glgpu [0]. GLName = "AMD Radeon HD 7800 Series.

  glgpu [0]. GLVendor = "ATI Technologies Inc."

  glgpu [0]. GLVendorID = 4098

  glgpu [0]. GLDriverVersion = "16.150.2211.0".

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = "AMD Radeon HD 7800 Series.

  glgpu [0]. GLRendererID = 26648

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver = "aticfx64.dll, aticfx64.dll, aticfx64.dll, amdxc64.dll, aticfx32, aticfx32, icfx32, amdxc32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll.

  glgpu [0]. GLDriverDate = "20160321000000.000000 - 000.

  glgpu [0]. CanCompileProgramGLSL = 1

  glgpu [0]. GLFrameBufferOK = 1

  glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = '4.50 ".

  glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] [483647-2147] =

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [192]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [32]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [32]

  glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [16384]

  glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [16384]

  glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [128]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [29]

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 1

  clgpu [0]. CLPlatformVersion = "AMD 2.0 - APP (2004.6)"

  clgpu [0]. CLDeviceVersion = "1.2 AMD - APP (2004.6)"

  clgpu [0]. IsIntegratedCLGPU = 0

  clgpu [0]. CLMemoryMB = 2048

  clgpu [0]. CLName = 'Pitcairn '.

  clgpu [0]. CLVendor = "Advanced Micro Devices, Inc."

  clgpu [0]. CLVendorID = 4098

  clgpu [0]. CLDriverVersion = "2004.6 (VM).

  clgpu [0]. CUDASupported = 0

  clgpu [0]. CLBandwidth = 1.28426e + 011

  clgpu [0]. CLCompute = 1283.82

  Type of license: subscription

  Serial number: 96040534990601259456

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2015\

  Temporary file path: C:\Users\carl\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  G:\, 59.6 G, 58.5 G free

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop 2015\Required\Plug-Ins\ CC

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop 2015\Plug-ins\ CC

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2015-09-09 at 18:52:48 79,567158 79.567158

  AdbePM.dll PatchMatch 0000-00-00-00: 00:00 1.   1.

  AdobeLinguistic.dll Adobe linguistic Library version 9.0.0

  AdobeOwl.dll Adobe Owl 5.2.9

  AdobePDFL.dll PDFL 2015/09/12-01: 10: 45 79,156620 79.156620

  Adobe AdobePIP.dll 7.3.1.70 product improvement program

  AdobeSVGAGM.dll AdobeSVGAGM 79.566705 79.566705

  AdobeXMP.dll Adobe XMP Core 2015/09/10-01: 10:20 79,158325 79.158325

  AdobeXMPFiles.dll Adobe XMP files 2015/09/10-01: 10:20 79,158325 79.158325

  Adobe XMP Script 2015/09/10-01: 10 AdobeXMPScript.dll: 20 79,158325 79.158325

  adobe_caps.dll Adobe CAPS 9,0,0,28

  AGM.dll AGM 2015-09-09 at 18:52:48 79,567158 79.567158

  ahclient.dll AdobeHelp Dynamic Link Library 2.0.0.2

  AIDE.dll HELP-2015/15/10-11: 58:31 79,568000 79.568000

  Amtlib.dll AMTLib (64 Bit) 9.0.0.89BuildVersion: 9.0; Brand: Tuesday, August 25, 2015 07:30:38) 1.000000

  ARE.dll ARE 2015-09-09 at 18:52:48 79,567158 79.567158

  Axe8sharedexpat.dll AXE8SharedExpat 2015/03/13-23: 40:54 79,562390 79.562390

  AXEDOMCore.dll AXEDOMCore 2015/03/13-23: 40:54 79,562390 79.562390

  Bib.dll BIB: 2015-09-09 at 18:52:48 79,567158 79.567158

  BIBUtils.dll BIBUtils: 2015-09-09 at 18:52:48 79,567158 79.567158

  boost_date_time.dll photoshopdva 8.0.0

  boost_signals.dll photoshopdva 8.0.0

  boost_system.dll photoshopdva 8.0.0

  boost_threads.dll photoshopdva 8.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.3.7.33275 2.3.7.33275

  Adobe CITThreading.dll CITThreading 2.3.7.33275 2.3.7.33275

  CoolType.dll CoolType 2015-09-09 at 18:52:48 79,567158 79.567158

  c:\windows\system32\dnssd.dll Hello 3,0,0,2

  dvaaudiodevice.dll photoshopdva 8.0.0

  dvacore.dll photoshopdva 8.0.0

  dvamarshal.dll photoshopdva 8.0.0

  dvamediatypes.dll photoshopdva 8.0.0

  dvametadata.dll photoshopdva 8.0.0

  dvametadataapi.dll photoshopdva 8.0.0

  dvametadataui.dll photoshopdva 8.0.0

  dvaplayer.dll photoshopdva 8.0.0

  dvatransport.dll photoshopdva 8.0.0

  dvaui.dll photoshopdva 8.0.0

  dvaunittesting.dll photoshopdva 8.0.0

  Dynamiclink.dll photoshopdva 8.0.0

  ExtendScript.dll ExtendScript 2015/04/17-16: 55.22 80.1017022 80.1017022

  icucnv40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icudt40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icuuc40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  igestep30.dll IGES 9.3.0.113 drive

  imslib.dll IMSLib DLL 9.0.1.14

  JP2KLib.dll JP2KLib 2015/08/14-01: 13: 58 79,258941 79.258941

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 7.3.1.70

  Manta.dll Manta 1.   1.

  mediacoreif.dll photoshopdva 8.0.0

  MPS.dll MPS 2015/08/14-01: 13: 58 79,566687 79.566687

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CC 2015 16.1.2 Photoshop.dll

  Adobe Photoshop CC 2015 16.1.2 plugin.dll

  PlugPlugExternalObject.dll CEP PlugPlugExternalObject Dll (64-bit) 6.1.0 Standard Adobe

  PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 6.1.0.164

  Adobe Photoshop CC 2015 16.1.2 PSArt.dll

  Adobe Photoshop CC 2015 16.1.2 PSViews.dll

  SCCore.dll ScCore 2015/04/17-16: 55.22 80.1017022 80.1017022

  SVGRE.dll SVGRE 79.566690 79.566690

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408

  tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 9.0.0.15 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 9.0.0.15

  VulcanControl.dll Vulcan Control Library 5.2.0.35 Application

  VulcanMessage5.dll Vulcan Message Library 5.2.0.35

  WRServices.dll WRServices Friday, July 31, 2015 07:50:10 build 0.21834 0,21834

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 16.1.2 (2015.1.2 x 001 003 x)

  Accented edges 16.1.2

  Adaptive wide-angle 16.1.2

  Angular Strokes 16.1.2

  Average 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 bas-relief

  16.1.2 BMP

  Camera Raw 9.6

  Camera Raw Filter 9.6

  Chalk and charcoal 16.1.2

  16.1.2 charcoal

  16.1.2 chrome

  16.1.2 Cineon (2015.1.2 x 001 003 x)

  Clouds 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 COLLADA (2015.1.2 x 001 003 x)

  Halftone color 16.1.2

  16.1.2 color pencil

  CompuServe GIF 16.1.2

  Conté 16.1.2 pencil

  16.1.2 crack

  Crop and straighten Photos 16.1.2 (2015.1.2 x 001 003 x)

  Crop and straighten Photos 16.1.2 filter

  Hatch: 16.1.2

  Crystallize 16.1.2

  16.1.2 cutting

  16.1.2 Dark strokes

  16.1.2 deinterlacing

  16.1.2 DICOM

  Difference clouds 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 glow

  Move 16.1.2

  16.1.2 dry brush

  Eazel acquire 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 entropy (2015.1.2 x 001 003 x)

  NO export VERSION color tables

  Extrude 16.1.2

  FastCore 16.1.2 routines (2015.1.2 x 001 003 x)

  16.1.2 fibers

  Film Grain 16.1.2

  16.1.2 filters Gallery

  Flash 3D 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 fresco

  16.1.2 glass

  16.1.2 Scarlet contours

  Google Earth 4 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 grain

  16.1.2 graphic pen

  Halftone Pattern 16.1.2

  16.1.2 HDRMergeUI

  HSB/HSL 16.1.2

  IFF Format 16.1.2

  16.1.2 IGES (2015.1.2 x 001 003 x)

  16.1.2 ink outlines

  JPEG 2000 16.1.2

  16.1.2 flattening coefficient (2015.1.2 x 001 003 x)

  16.1.2 goal blur

  16.1.2 goal correction

  Lens Flare 16.1.2

  Liquefy 16.1.2

  Operation of Matlab 16.1.2 (2015.1.2 x 001 003 x)

  maximum 16.1.2 (2015.1.2 x 001 003 x)

  Mean 16.1.2 (2015.1.2 x 001 003 x)

  Measure Core 16.1.2 (2015.1.2 x 001 003 x)

  Median 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 Mezzotint

  Minimum 16.1.2 (2015.1.2 x 001 003 x)

  MMXCore Routines 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 mosaic tiles

  Multiprocessor support 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 Neon

  16.1.2 paper

  16.1.2 color NTSC (2015.1.2 x 001 003 x)

  Ocean Ripple 16.1.2

  16.1.2 OpenEXR

  Paint Daubs 16.1.2

  16.1.2 palette knife

  16.1.2 patchwork

  Paths to Illustrator 16.1.2

  16.1.2 PCX (2015.1.2 x 001 003 x)

  16.1.2 photocopy

  16.1.2 Photoshop 3D engine (2015.1.2 x 001 003 x)

  Photoshop Touch 14.0

  Photo filter package 16.1.2 (2015.1.2 x 001 003 x)

  Pinch 16.1.2

  Pixar 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 in plaster

  16.1.2 plastic wrap

  16.1.2 PLY (2015.1.2 x 001 003 x)

  16.1.2 PNG

  16.1.2 pointillism

  16.1.2 the polar coordinates

  Portable Bit map 16.1.2 (2015.1.2 x 001 003 x)

  Poster edges 16.1.2

  People's Republic of CHINA 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 radial blur

  16.1.2 radiance (2015.1.2 x 001 003 x)

  16.1.2 range (2015.1.2 x 001 003 x)

  Color research grid NO VERSION rendering

  16.1.2 Crosslinking

  16.1.2 the ripple

  Rough Pastels 16.1.2

  Save for Web 16.1.2

  16.1.2 ScriptingSupport

  Shake Reduction 16.1.2

  16.1.2 shear

  16.1.2 asymmetry (2015.1.2 x 001 003 x)

  Smart Blur 16.1.2

  Smudge Stick 16.1.2

  Solarize 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 spaces

  16.1.2 splash

  Spherize 16.1.2

  16.1.2 sponge

  16.1.2 sprayed strokes

  16.1.2 stained glass

  16.1.2 stamp

  16.1.2 standard deviation (2015.1.2 x 001 003 x)

  STL 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 Sumi-e

  16.1.2 summation (2015.1.2 x 001 003 x)

  16.1.2 Targa

  16.1.2 texture veneer

  16.1.2 tiles

  16.1.2 torn edges

  16.1.2 twirl watch

  16.1.2 U3D (2015.1.2 x 001 003 x)

  16.1.2 draft

  16.1.2 vanishing point

  16.1.2 variance (2015.1.2 x 001 003 x)

  Virtual Reality Modeling Language. VRML 16.1.2 (2015.1.2 x 001 003 x)

  Water paper 16.1.2

  16.1.2 watercolor

  16.1.2 wave

  Wavefront | 16.1.2 OBJ (2015.1.2 x 001 003 x)

  WIA support 16.1.2 (2015.1.2 x 001 003 x)

  16.1.2 wind

  Wireless Bitmap 16.1.2 (2015.1.2 x 001 003 x)

  Zig - zag 16.1.2

  Plug-ins option and third parties:

  Portrait Professional 1, 6, 1, 0

  Plug-ins that could not load: NONE

  Extensions:

  Recent files 1.2.1

  C:\Program Files (x 86) \Common Files\Adobe\CEP\extensions\CCX_START_EXTENSION_1_2_1_001\index.html

  Libraries 2.3.1048

  C:\Program Files (x 86) \Common Files\Adobe\CEP\extensions\CC_LIBRARIES_PANEL_EXTENSION_2_3_1048\index.html

  Beginning 1.2.1

  C:\Program Files (x 86) \Common Files\Adobe\CEP\extensions\CCX_START_EXTENSION_1_2_1_001\index.html

  Adobe 6.1.0 color themes

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.KulerPanel.html\index.html CC

  Export as 2.4.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC

  Overview of the 1.1.3 device

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSPanel\panel.html CC

  Share on Behance 3.0.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.behance.shareonbehance.html\index.html CC

  com.adobe.preview.Loader 1.1.3

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSLoader\loader.html CC

  Export as 2.4.0

  C:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC

  Install TWAIN devices: NONE

  Hello

  You can try this option please

  Preferences-> General-> Performance and box unchecked just the 'use graphics processor' and edited the levels on the layer mask.

• Its posible to stream videos in mobile office Lightroom, I all ready done from my iPad to my desktop. I just want to do the opposite.

  Its posible to stream videos in mobile office Lightroom, I all ready done from my iPad to my desktop.

  I just want to do the opposite.

  Thank you for your help...

  Hi Richard,

  Sync video Lightroom Mobile Office is not yet supported.

  Kind regards

  Claes

• Quick mask is no longer in the toolbar?

  I don't have the quick mask tool in the tool palette. And the Q shortcut does not work. I'm so used to switch between the Quick Mask mode and selection mode, I don't know if the tool is long gone. Now, I can only reach quick mask in the selection menu.

  With CC 2015 was last updated, it is possible to handpick what tools you want to see in the tool palette. But it's not hidden here either. Any suggestions?

  Hey Fredrick,

  Go to Edition > Toolbar > choose 'restore defaults' and uncheck "Disable shortcuts for hidden toolbar options" > click OK.

  Kind regards

  Claes