Hi grade laptop with no error of drive loading cd/dvd system
my daughters laptop computer notebook comes on and then it just says: error loading system. someone can help Hi-grade leisure £90 to pick up and check it out without the expense of repair. It doesn't seem to be something in the bios I have configure havetried set-up charge or failsafe defaults but nothing works, it just goes back to the error during the repressive loading, I noticed when it lights up indicating fujitsu siemens which is my lap top. ???
Thanks I'll shop here if it's overpriced. HI-grade do not even have a phone number and their Web site does not support. I got it through a book of shopping at my friend had and it cost £400 to buy the warranty failed in January. Thanks for the reply.
Tags: Windows
Similar Questions
-
I have Fujitsu laptop with a CD - R drive and a DVD - R drive
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
- It will read the software and data CD, DVD-video, but it will not read the CD of music or audio CDs, but other bed? I tried many CDs of music I know is good and they work in another PC. Other wise, readers seem to work.
Hi jess90292,
· What happens when you try to open the CD in windows explorer?
· You receive an error message?
· Do you have nay third software of CD/DVD burning on the computer?
Run the patch from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us?entrypoint=lightbox
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
where can I download PCI device Acer laptop with win7 64 bit driver
where can I download PCI device Acer laptop with win7 64 bit driver
Information on what you need the driver can be useful, but--
All the drivers for your card mother books must be downloaded from the Acer site.
These should include drivers for the cards that use a PCI slot. If not then you would
Download the drivers from the mfg of the connected to the PCI slot expansion card.
. -
Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.
I use vmware vcenter spec customization here,
I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.
Also change to vmxnet3 NIC and install vmware tools and try cloning.
"
) More than 8 k
(b) set incorrect permissions
(c) corrupted somehow
For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was. Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out. Here are the steps to get the newspaper, you must see:
When you see the error message, follow these steps:
1.) press SHIFT + F10 to get to a command prompt
2.) stand C:\windows\Panther
3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)
4.) copy the file to another computer that has Windows 7 setup.etl corrupt system. Place it at the root of C:\ for easier access.
5.) open a prompt on the Windows 7 computer.
6.) navigate to the root of C:\ (or anywhere where you saved the file)
7.) type "tracerpt setup.etl o logfile.csv.
8.) close command prompt and open logfile.csv in your text editor of choice.
9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.
10.) remove this software from your image, or how to get the registry key that does not work properly.
After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.
"
-
How to set up the new HP laptop with the bad hard drive notebook
Children a new Hp laptop in June. The hard drive has been getting gradually stronger and is obviously about to go, with a blue error screen forcing a roll back of the computer. I did a full backup on an external hard drive and I'm back for a replacement. Should I make a recovery disk and reinstall from the disc when I get the new laptop, or should I just plug the external hard drive and transfer files via? A guy at work said using the recovery disk is the way to go, because it would be to reinstall Norton and other programs, we have installed., but I thought that backup external hard drive was supposed to be the way to do this
Because you have found a replacement of mobile complete, it will be installed on the 'old' came with.
If you have installed a new programs, games etc_then Yes restore the Image would be the best way to get back it quickly. This would assume that the replacement is the same model or very similar from a Image Restore the drivers also which should match the material of the machine.
-
I had a virus attack that caused the Vaio reboot continuously with blue screen - every 20 minutes.
Went to safe mode and created reinstall DVD.
However, it reinstalls properly and - error code 320.
Material is perfectly well based on material tests.
The dvd is maybe bad? What are my options?
Where can I get a dvd which is good?
Is it possible to recreate DVDs using the recovery partition?
Please notify.
You will not be able to create the recovery partition recovery disks. This must be done back in windows.
Error 320 may mean bad disc recovery, defective hard drive or bad memory in most cases. I would replace in that order.
-
Toshiba laptops with ACPI error during the installation of Windows Vista Beta 2
Many people including myself try to run Windows Vista along side XP on our Toshiba laptops, so that we can feel comfortable when buying vista. We expect no assistance phone premium. We would just like to know what the problem and hopefully provide technical information so Toshiba that would help their preperation for when Toshiba laptops are sold with Vista and hopefully solve this problem.
Please people who want to try it either could leave a message on this forum or you can also find a group of enthusiasts to:
Microsoft.public.Windows.Vista.hardware_devices under the heading of Tosh Satellite.We have so far put a lot of time and effort to gather all the information we have so far and would like to get to the bottom of this issue.
Hello
I don't know what you expect.
The name of the Vista says it all: Vista Beta 2 version - this is a beta version. It is not official on the market with many bugs.
Perhaps his works on desktop computers, but as you know laptops are different.
I think that we must wait for a version of the end and the drivers of Toshiba.
So you can be sure that this OS is supported and work properly on your laptop -
Driver is not compatible with the new op system. You or Belkin have download free fix or pilot?
www.Belkin.com
-
HI-Grade laptop with Windows XP - Start button problem
The Start button has broken off the coast to the Interior. Is it possible to start without using this button? Thank you for your help (if you can).
If the laptop itself is damaged, it must be sent and repaired.
-
I wish I had more space on my drive "C".
Hi Jaxown,
You can copy & paste or move programs & application on the USB drive.
For more information, see these links: to move files by dragging
Hope the helps of information.
-
We had the people that our PC reconstruction after an accident some time ago, say "it seems that the Windows swap file was somehow moved on the disk"D", and it should be on the main 'C' drive. Microsoft sent us an email with instructions on how to reset the Windows paging on 'C' drive system and to reset the minimum and maximum space allowed for it. We did it, but the ' warnings are still there. " The "D" drive is a drive of dvd - rw empy on the front of our Tower. Most of the time it is empty, as it is now.
What are they and how to fix it? I'm 73 years old and still learning. Grandpa
Hello
Check to see if that helps!
-
Trying to install XP Pro on a laptop with a SATA drive on it.
I'm trying to install XP Pro on a laptop with a SATA Hitachi drive and no floppy drive to load the drivers from. Hard drives is visible in the BIOS and AHCI in the BIOS as well. USB floppy drives will not work (will not be considered 'A' during installation). Is there a way to make an installation with appropriate drivers disk, added to this?
Hello
Please go to the bios and switch from AHCI mode and try again.
If it does not work. You could integrate the drivers in XP Pro
With the help of Nlite http://www.nliteos.com/download.html
Follow the instructions only the wake and burn to a CD.
Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul -
Acer aspire 7520 laptop my laptop cannot recognize my driver for cd/dvd drive.
original title: acer aspire 7520 laptop
my laptop can not recognize my driver for cd/dvd drive. I have been informed that it is due to the use of vistacan you help me plsHello
It would be very improper for any Windows operating system to does not support optical drives, especially if the laptop comes with Vista in the first place. So I'm afraid you've been misinformed. However, this link can help you to solve the problem...
http://support.Microsoft.com/kb/314060
Please post back with (a lot) more in detail if you still have questions after looking at the above.
Tricky
-
Not able to install the center of HP Officejet 5600 solutions on laptop with Windows 7
I bought a new laptop with Windows 7. Icannot install the all-in-one Officejet 5600 Center software on my new laptop with Windows7 HP solutions. CD tells me system is not compatible. What is the procedure & what program file is available for download? Advice please please!
You can download the Setup file for your printer from the link below:
-
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
Hello
You can use the Windows 8 Compatibility Center to find out if a device is compatible.
Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/homeFAQ - Windows Compatibility Center:
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ
Concerning
Maybe you are looking for
-
How to save the images in the photos on CD or DVD on Windows 10 PC? 10
Finally read them to resave pictures in photos. How can I save photos on CD or DVD on PC Windows 10?
-
Already have Windows 7 - can I get?
Hi all, I already have Windows 7 and I was wondering if I can improve my Windows Vista Ultimate Tochuscreen HP myself? Are there known issues with the drivers or other custom applications touchscreen? I really like the new Windows 7 Media Center and
-
ITunes problem previous library playing on the new iMac 4K
I just bought an iMac nine 4K El Capitan 10.11.1 running with iTunes 12.3.2.35. I also bought an iPad opportunity Air 2 out of glideslope. IPad is strictly for the use of music that I am a musician. Since I am unable to "migrate", I copied my old iTu
-
Printing on CD/DVD with Photosmart D7560 h
I recently bought a new desktop computer Win 8 and installed the driver of HP all inclusive for the Photosmart D7560. The printer works great for photos and documents. However, the Photosmart Essential software that allows me to create labels for C
-
I ran the code below as an AIR, using FlashBuilder 4 application 4.1 the Flex SDK with the AIR 2.5 kit. Then, I created a new project with BB SDK.9 actionscript and created a debug configuration, using the address IP of PlayBook simulator. The code