VAIO does not start. Reinstall the drive C with dvd fails with the error 320. Good repair dvd?

Similar Questions

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• XP Home Edition does not start without the installation CD after reinstall.

  I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data.  I have installed all service packs.  However, for some reason, I had to call Microsoft to get validated.  The only problem I have now is that it does not start without the installation CD in the drive.  I have XP on the half before the C drive and me on the back of half.  The reader is a digital WD800JBRTL of Western.  Well it worked like that for years. Why can I now not start without the CD?

  HiNeal2660,

  It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.

  You can perform a Windows XP repair installation & check if you are able to start normally.

  For more information, please visit this link: perform a repair Installation

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• HP 500-281: does not start a 2nd drive cloned in sata1

  HP 500-281 desktop

  Win 10 home

  BIOS MEMv80.22

  Short version of the latest issue:

  Fine Win10 after upgrade to 10 at the start of the hd0 in sata0 slot (original). HD1 in sata1 slot is a new clone of HD0 (Win10, using Reflect). HD1 and its files in Windows more HD1 is seen in the BIOS. If the boot order is changed in the BIOS will not start (sata1 above sata0), saying "no boot disk. Boot order reset default (sata0 and sata1). If the HD0 data cable is disconnected, does not start, once again "no boot drive" Boot order is reset by default. Cable data Sata0 off HD0 and HD1-connected, with no data connection to HD0. Now, she starts to HD1. How to start the HD1 connected to sata1 with or without HD0?

  Greetings,

  UEFI is ruthless.

  The cloned drive should be connected to the port SATA (SATA0) where the source drive has been connected.

  The cloned drive does not start on the SATA1 without modification.

  See you soon!

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• Does not start after the upgrade to 1.5.

  Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

  All ideas

  No problems in the past with edge since September 2012.

  =============

  Laptop HP Pavilion dv7-2185dx

  Dv7-2185dx product name

  #ABA product number NV023UA

  Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

  The microprocessor Cache L2 6 MB Cache memory

  6144 MB of memory

  Memory Max 8192MB

  Graphic ATI Mobility Radeon HD 4650 (M96)

  Video memory up to 2815 MB (1024 MB dedicated)

  500 GB (5400 RPM) hard drive

  Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

  17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

  Fax/Modem high speed 56 k modem

  Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

  Wireless Connectivity Intel WiFi Link 5100AGN

  The Altec Lansing SRS Premium Sound technology with subwoofer

  101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

  Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

  External ports

  5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

  4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

  2 headphone

  1 microphone input

  HDMI

  1 VGA (15-pin)

  eSATA + USB 2.0

  1 RJ-11 (modem)

  1 RJ - 45 (LAN)

  expansion port for computer 1 cell 3

  1 IEEE 1394

  irewire (4 pin)

  1 consumer IR (remote receiver)

  Other devices HP Webcam with integrated digital microphone

  Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

  Weight lbs 7,74

  Housing for Kensington MicroSaver Security lock

  Turn on the password

  Accepts 3rd party locking safety devices

  Software

  Operating system:

  Genuine Windows Vista Home Premium 64-bit with Service Pack 1

  
  

  Hi, people.

  I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

  Thank you

  -Elaine

• From itunes last update itunes does not start without the permission

  iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions.  I am the administrator. Windows 7 Professional.

  See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.

  TT2

• Mac does not start and the fans going crazy

  Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?

  OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.

  SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?