Hi, I got creative cloud on my dell laptop but recently the laptop has stopped working so I got a mac, and I downloaded creative cloud on my mac, but it comes out as a trial version. don't know why, can anyone help?

Similar Questions

• My D drive is about out of space. I don't know why, can anyone help please

  My D drive is almost out of space for some reason, somone can help me out here please. Thank you

  Hello

  Follow the steps in the HP document on the following link.

  Low disk - recovery Partition space.

  Best regards

  DP - K

• I get an error code, 0 x 80070070. Don't know why, can anyone help me with this?

  Error code 0 x 80070070, what do I do to fix this?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If it does not, then thanks for posting any repetitive error messages in the event viewer (start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  http://www.vistax64.com/tutorials/88236-repair-install-Vista.html , as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure:

  Lorien - a - MCSE/MCSA/network + / A +.

• I bought my dell studio with webcam 2010. Not long after that I bought the audio has stopped working. What is so frustrating, is that there is no troubleshooting feature...

  Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value?   the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover

  Hi Susan,.

  1. are you able to hear the system sounds?

  2 are you facing any problem with Dell webcam?

  3. What is the number of the model of the computer?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  To resolve the problem with the sound, I suggest to refer to article and follow these steps:

  No sound in Windows

  If the problem is not resolved, please respond with more details.

• I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What should do?

  I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What to do

  Install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Use it to install your lr.

• Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

  Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

  I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

  What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you

• Dell Inspiron 9400 and the charger has stopped working.

  I have a Dell Inspiron 9400 and the charger has stopped working. I looked on the Dell support site and they sell no spare Chargers.  I looked on ebay and they are inundated with Chargers dell from £ 6 to £99.    But how can I be sure that they will not be some sloppily made Chinese clone that will burn my house!

  I would have a go to repair the charger If Dell has not seen fit to the heat of welding the two halves closed!

  You can search a person selling a genuine Dell PA10 adapter.  This is what you need.

• Can I repair my version of Photoshop when the license has stopped working?

  I just got a message when I tried to open a file in Photoshop, saying that "license for this product has stopped working". I have CS3. I work on a Mac under OSX-Yosemite 10.10.5. The message says that I must repair the problem by uninstalling and then reinstalling the probem. I have the installation disc. If I uninstall and reinstall it will work?

  Move to the Photoshop forum

• Hi, I keep getting a pop up whenever I start my computer stating sync apple laptop has stopped working and the solution is to re install, but I don't know where he comes and he can't find in my list of programs.

  He gave me a bucket id and a so-called solution is available, but I don't have a clue! There are 3 programs from apple, that I installed it but none of them say notifier synce apple, it also shows that a pop-up based apple window stopped working pleas help thanks!

  He gave me a bucket id and a so-called solution is available, but I don't have a clue! There are 3 programs from apple, that I installed it but none of them say notifier synce apple, it also shows that a pop-up based apple window stopped working pleas help thanks!

  Hey dizzydopeymare

  There is nothing to do with vista

  It's apple software problems

  It is related to itunes quicktime etc problems

  Contact apple support

  Apple newsgroups at links below

  http://discussions.Apple.com/thread.jspa?threadID=1949073

  http://discussions.Apple.com/thread.jspa?MessageID=11315722�

  Apple support at the link below

  http://www.Apple.com/support/

  Walter, the time zone traveller

• My license Windows Vista included in my Dell laptop has been lost. How do I rdownload and re - install the Windows on my laptop again?

  My laptop has been infected with a virus and I did a ghost to restore the system. Unfortunately, I chose the wrong disc hard Ghost in so packed in the computer Windows Vista laptop has been erased. So I want to know how to download and install again.

  Please see: How to request a backup Dell drive

• My Dell laptop has begun to consume 100% of his memory and then eating my hard disk activity, causing the light becomes solid.

  After the restart after that the most recent windows update, my computer dell laptop began to consume 100% of its memory, and then eating my hard disk activity, causing the light becomes solid. The computer is severely slow, I checked for viruses, malware, and registry errors with no chance to address the issue. The computer is a memory dump, but I could so he could properly start without doing a memory dump, it becomes all just slow and unresposive at the simplest of tasks. Any ideas of what it could be? What to check? How to fix?

  Original title: excessive use of Ram

  Runs a more comprehensive material, it was established that it is a bad hard drive. Fortunately, it's not bad enough that the data is not recoverable so I replace the hard drive.

• I got a link to download and install because the mine has stopped working. Where is he? I think I uninstalled the old version. My number is 0217498994 and I was talking to Neha

  How to uninstall and reinstall Adobe Acrobat 9 Pro?

  Use the uninstall program uninstaller.

  Use the Setup program to install.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I installed the mappoint trial 2013 and he says that it is 100% complete, but asks me what program I want to open it with. Can anyone help?

  He did not a regular download. He asks me what program to use to open and all the options it gives me do not work

  Hello

  Check with the help of MapPoint and in the MapPoint Forums.

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoiint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Edit tools: pointing out the tool has stopped working, how to fix this?

  
  My highlight tool worked this morning, but after clicking on a box that says do not yet show that my highlighting tool has stopped working. How can I fix it?

  Rahul,

  After posting my question, I found how to solve my problem. I just reset the warnings edition.

  Thank you

  Kelsey