Some programs cannot connect to the internet on Windows Vista?

Similar Questions

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the internet using Windows Vista Edition Home Premium

  Just installed Windows Vista Home Premium and cannot connect to the internet.  The network card is a Broadcom 802.11n and a code appears who says: device cannot start (Code 10).  Does anyone know how I could fix this problem?

  I think that you don't have the right driver.

  Go to the website of FAB and look for downloads or support and type in your model number and find the driver for the network card.

  Thank you.

  Tech of

  http://www.computerstar.ca/

• My laptop is one of the 4 home cannot connect to the internet, it's Vista and it has connected w/Ethernet no problem, I called Xfinity tech, that says, is the problem of configuration! Can you help me?

  Acer laptop, Vista is, she can connect wirelessly with my friend modem but my house, she can't, I use the service of Comcast, they checked the modem is fine, they think that the problem of configuration! I'm not computer too, thank you!

  Ryan (Shih Chi)

  Hello

  How do you try to connect the computer to the House? Wired
  or wireless?
  Try the methods provided and see if it helps to solve the problem.
  Method 1:
  Check out the link and follow the troubleshooting steps in the article.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  If you try to connect to t Wireless net work then refer to this link and follow the steps.
  Connect to a network with Windows Vista wireless
  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx
   
  Method 3:
  Reset TCP/IP on your computer and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  Method 4:
  You can also visit this link and follow the steps.
  
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• WRT54GL establishment cannot connect to the Internet

  I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet.  Why the hell not?  I am writing on the same laptop, using the same ADSL modem and Internet connection.  So why don't the router sees it?  The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of.  I didn't know if he wanted the original preset 'admin' or that I had sometimes back (hours) came the first time that this has been asked.  So I tried both.  Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet.  Power, then turn on the DSL Modem. "I did already too many times to count.  And again I say, this direct DSL connection of the modem for my laptop is fine.  But when the cable Internet through the router, then the other wire goes to my laptop, no Internet.  All the time my DSL modem displays a green light for the Internet.  And the router shows a light on the Internet.

  I'm too tired to walk any further tonight.  Maybe someone has a simple suggestion.  I'll check tomorrow.

  Thanks for helping this rank amateur.

  Try to configure the router manually.

  Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

  Follow this link to configure the router with DSL Internet Service.

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• I had Acrobat Pro 8.3 for awhile. It is a registered product. However, as I updated to Windows 10, repeat me that it cannot connect to the internet to register or update the product

  I had Acrobat Pro 8.3 for awhile. It is a registered product. However, given that I have updated to Windows 10, he repeats that it cannot connect to the internet to register or update the product. I am connected to the Internet. What should I do?

  Thank you

  Reinstallation of my original DVD has solved the problem.

  Charlie

• Why my Labtop cannot connect to the Internet by Modem USB?

  Why my laptop can't connect to Internet by Modem SUB? And the message that show me he said that "the mistake of reporting services may be temporarily unavailable" I really want to know about this problem. You can top me, pleases?
  Thank you very much

  Name, make and model of modem?

  USB modems require thay you install a driver that is compatible with the operating system.

  I have a USB HUAWEI modem and its only compatible with WIndows Vista and XP, so I have to use it to connect to the Internet through Windows XP Mode.

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Unable to connect to the Internet on Windows 8

  Original title: Windows 8

  I receive the message that Microsoft cannot connect to the internet and that I should check my connection, DO NOT CALCULATE!

  Hi Kenneth,

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are unable to connect to the Internet. Let me try and help you with the issue that you are facing.

  1. What is the brand and model of the PC?

  2. do you let us know the exact error message that you receive? This is important in order to solve the issue accordingly.

  3. are you connected wired or wireless network?

  Internet connection issues are more often caused by cables disconnected or routers and modems that do not work correctly.

  Follow the steps in troubleshooting this article and check if this helps solve the problem.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Carnt connect to the internet, a window opens saying code error 680, no dailing tone

  Carnt connect to the internet, a window opens saying code error 680, no dailing tone

  Hello

  You did changes to the computer before this problem?

  Read the following article that may help you resolve this problem.
  Troubleshoot modem
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.