Hi, I have a sport IWatch found that domestic activity (usually running on treadmill) there is a huge different iWatch see the short distance (approximately 23%) then the treadmill Distance (I used several treadmills). Calibrate the iwatch outside. any o
Hello
I have a sport IWatch found that domestic activity (usually running on treadmill) there is a huge different iWatch see the short distance (approximately 23%) then the treadmill Distance (I used several treadmills). Calibrate the iwatch outside.
no possibility to calibrate domestic? or solution of New York.
Thank you
Avner
Hi Avner
Currently, there is no way to calibrate Apple Watch on a treadmill.
Calibration teaches your watch how your arm movements relate to your length of stride at different speeds when walking you and/or running. It does this by comparing the accelerometer data with GPS (location services) data from your iPhone. To optimize the performance of the application of the workout, when using the treadmill, allow your arms swinging naturally.
It can help restore your calibration data and start over:
On your iPhone, in the application of the watch, go to: My Watch (tab) > privacy > Motion & Fitness > tap reset Calibration data.
To calibrate again, follow the instructions in the article to support below, including:
- Records open-air market training and/or run in the open air with the application of the workout on your watch.
- This for 20 minutes at each speed to during which normally walk you or run.
- While doing so, take your iPhone with you, with location on Services.
- Allow your arms swinging naturally during training.
Estimates of activity also dependent on your personal information. To verify that it was entered correctly and update over time:
-On your iPhone, in the application of Eve, go to: Watch My > health > edit (top-right).
More information:
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
Use the activity on your Apple Watch - Apple Support
Use of the workout on your Apple Watch - Apple Support
Tags: Apple Watch
Similar Questions
-
I used "windows easy transfer", but after that I can see the files. Any idea about it?
original title: Windows easy transferHi Vrajeshparekh,
1. what files you're talking about?
2. When you see the files?When you use the Windows easy transfer cable to transfer the data that the data is copied. So you copy the data on the old computer also.
Windows Easy Transfer (applies to Windows Vista)
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transferHow Windows Easy Transfer makes setting up a computer easier? (Applies to Windows Vista)
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier -
I have itunes 12.4. When I try to add a new song to icloud music library I see the following message: "Genius results cannot be updated because the iTunes store does not recognize your iTunes library." He then ordered me to turn off Genius, and then turn it back on. There is no option. Othe impossible of access devices correspond to these songs via itunes. Any help would be appreciated.
Hello Subocz E M.
Thank you for using communities of Apple Support. I see that you had problems adding pieces and turn off Genius. I know how it is important to be able to add music to iTunes. I'm happy to help you.
Since you are being invited to turn off Genius, you can add music, please use the following information to resolve these two issues:
Turn on or off the Genius
If iCloud music library is enabled, you cannot disable Genius.
Choose file > library > Genius (toggle Genius).
Turning off the Genius Genius Genius Shuffle shuts and and the Genius Mix.
12 iTunes for Mac: use Shuffle Genius, Genius or Genius Mix playlists
Have an amazing day!
-
I plug just after effect cs6 and I have installed it on my laptop but my composition screen is black and I'm not able to see the video. Here are the following info on my computer. resolution 1366 x 768, 60, graphoc memeory 1792 MB referesh rate. 1 TB hard drive, 12 GB of RAM
Thank you
Deban Tony wrote:
resolution 1366 x 768,.
The requirements for the CS6 (which can be found here: system requirements:) After Effects) specify a resolution of at least 1280 x 900 display
-
What is an installation package "status.msi", it doesn't let me access my command to scan on my HP officejetJ5780 all-in-one. It indicates that the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi. It's also prevents me to access my backup disk.
Original title: status.msi?
I restored my computer to a period of time, two weeks earlier and which seem to fix the problem, somehow. Thank you
-
I am with a printing company large format and I'm trying to download the trial for illustrator to have a better understanding of what I do. I am a first time user and have virtually no experience in this field, I received this message "you run an operating system supporting Illustrator is more." See the system requirements for a complete list of the supported platforms. "I don't know the measures that must be taken to be able to download it?
Here's what I know on this computer, I use google chrome.
My system is Windows Vista Home Premium Service Pack 1
Manufacturer Toshiba
Intel Core 2 Duo CPU T5750 @ 2.00GHz processor 2.00 GHz
Memory (live RAM) 4.00 GBType 64-bit operating system
C: 230 GB of free GB 296
I don't know if you need this information or not but any help will be greatly appreciated.
Thank you!
Brittany
The message indicates that your system does not neet the system requirements for the version of Illustrator, you are trying to use. If this is the latest version of Vista is probably too old to meet the requirements. In any case, here is a link to the system requirements for all versions of Illustrator... choose the one that you try to use and compare their needs to your system to see where you come up short...
Illustrator - http://helpx.adobe.com/illustrator/system-requirements.html
-
I need to transfer my files to my external hard drive free windows click on my mac. I can see the drive but cannot do anything or transfer. any help is appreciated.
The drive does not appear in the Finder? Do you get an icon for it on your desktop?
You say that it recognizes the drive, how exactly, what is the point?
What happens when you try to use it?
How the drive is formatted? Is it encrypted?
-
8 computer is a mess... I am running Windows XP seven.
Cannot access tools, show many errors, see the following issues...
ERROR CODE 0 X 80070715
ERROR CODE FOR INSTALLING WINDOWS DEFENDER
HTTP ERRORS - directory 404 not found
SCRIPTS - you run Scripts (gives an explanation by saying "If you continue to run scripts, that can compromise your computer")
-the choice to continue running scripts or stop script execution...
WEBPAGE SCRIPT ERRORS
PUBLISHER 2010 does not run or act as it did when first installed...Then... I get...
TO BLOCK OR UNBLOCK A PUBLISHER
Internet Explorer allows you to block or allow downloadable software publishers. The Publisher is identified by the digital signature applied to the file that is downloaded. If the file is not signed, changing these settings will have no effect. For more information about digital signatures and certificates, click related topics.
To block an editor
If a file is downloaded to your computer, you will see a security warning dialog box. If it has a button more options , you have the possibility of preventing the download more software on your computer of this editor.
- In the security warning message, click more options.
- Click never install the software of the name of the Publisher.
As you can see... I need to go to the 'TOOLS' to change anything on my computer... not able to access the 'TOOLS '.
To assign an Web site to a Security - Zone could not be opened for this...
Can someone help me with a single blow to properly operate my computer? Impossible to buy a new laptop because without finance.
Laid off in March 2013 and need this laptop to find and apply for a new job.
Thank you very much, Mr. VMW
... Can someone help me with a single blow to properly operate my computer?
If this is the result of infection by the virus scanner Malwarebytes on the machine.
John
-
In my post in November, I explained that I had tested the power supply with a multimeter and read the correct voltage. Two people to the Board of Directors always seem to think it was the power supply, so I replaced it with a new one (Corsair CX 430 R) and it still won't turn. I had suspected the power switch because when I bypass the MOBO 20 pin plug 'on', the power led lights up, fans have come on short and I heard the rotation of the disk. I also tried to troubleshoot the switch by jumpering the pins on the motherboard, but still no luck. Someone there ideas more before I replace the card MOTHER and CPU? Thanks in advance.
Roamstead
Cloud_strider,
Thanks for the reply. After swapping the PSU, CPU, taking the RAM pins on jumping on the MOBO for power/LED/reset button, each separately and with the same result, I eventually swapped the MOBO to an ASRock A785GM - THE and who did! He finally put under tension. Thanks again.
roamstead
-
I have an old windows 98 are dedicated to this plotter and it work fine until we have upgraded to the new machine with windows xp.
Hello Dzuco,
Thank you for your message. You will need get a driver xp for printer/plotter. Pilots are produced by the manufacturer and are usually downloaded from their Web site, however, I can't seem to find anything online to JRL Systems. I recommend you contact JRL systems for the suitable driver for your printer. You also have the option to search the Web for 'plotter jrl systems printer driver. Don't forget that some 3rd party software can contain viruses and malware, so take precautions by downloading and installing the 3rd party software.Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Why can I not see the keyframes outside the edges of the effect control window?
I can't keyframes, I added at each end of an element in the control of effects in Premiere Pro CS6.
Keyframes are 'outside' from the edge of the window. I want to so I can reach them.
When I pull on the edges of the effect control window, he enlarged the keyframe graph only, it does not reveal the current keyframe.
What I am doing wrong?
Use drop down the menu and deselect Pin to Clip.
-
See the settings that will change after Oracle restart
Hi all
Oracle 11g
Linux
My current SGA is 700M.
If I give you:
SQL > alter system set sga_max_size = 2G scope = spfile;
Modified system.
SQL > alter system set sga_target = 2G scope = spfile;
Modified system.
After that, I won't have to restart the database. But, now, I type "CMS show", that is to show 700M.
My question is: How can I see the values of the parameters that will change after the instance is restarted? Thank you
Select *.
v $ spparameter
less
Select *.
the parameter $ v
See V$ SPPARAMETER
--------
Sybrand Bakker
Senior Oracle DBA
-
Be able to listen to music, but can not see the game
Original title: no video
I have a Dell XPS1 and loaded a game software. I can hear the music, but do not see the game. Any suggestions? Thank you! Karen
Hello
Please try to install the video card drivers.
-Attempt to fix the game
-Install the game in compatibility mode
-Check the specifications of the games.
I hope that this information is beneficial.
Thank you
Aaron G.
-
How to see the volume mounted in Windows Explorer?
Hi all
I am new bie to the VDDK stuff, you might find my pretty obvious question.
I use the VXMnt API to mount the drive but I don't see that he set up in Windows Explorer.
I am able to see the \\.\vstor2-mntapi10-shared-2CB22CB2007E00000000001000000\. In my opinion, this device comes only after successful mounting of the volume.
I also called DoDOSDevice (...) to map this unit as a player.
DoDOSDevice (...) returns successfully and creates drive, but I am not able to browse it from Windows Explorer.Here are the calls that I do:
VixMntApi_Init (1, 0, NULL, NULL, NULL, NULL, NULL)
VixMntApi_OpenDisks (connection, DiskNames, numberOfDisks, VIXDISKLIB_FLAG_OPEN_READ_ONLY, & disksetHandle)VixMntApi_GetVolumeHandles (...)
VixMntApi_MountVolume (...)
VixMntApi_GetVolumeInfo (...) -> Symboliclink used to DefineDOSDevice
DoDeviceName (.)I changed \\.\vstor2-mntapi10-shared-2CB22CB2007E00000000001000000\
TO
"\DEVICE\vstor2-mntapi10-shared-2CB22CB2007E00000000001000000" - but without success
"\\?\GLOBALROOT\\DEVICE\vstor2-mntapi10-shared-2CB22CB2007E00000000001000000" - without success.Please correct me where I'm wrong. If possible, share the sample code.
Thank you
A breakpoint will affect not to work. The program must be running to be able to serve Windows i/o requests. I have not seen the attached code, but you might need to restructure your program to continue to run as long as there are any mounted volumes.
Thank you
Annick
-
Computer Windows Vista is unable to see the Boxee Box or Windows 7 computer.
original title: network sharing
I have a Windows Vista-based computer, a Windows 7 computer and a Boxee Box from d-link.
The windows vista machine is set up for sharing, but I thought that you should choose what is shared. I'm not able to see the Windows 7 machine or the boxee box to share with... This is due to the different operating systems?
When I implemented the boxee box he showed all the shared files when I couldn't see the device to share... why?
Maybe this can help.---------------------
The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.
----------------------
Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .
------------------------------
Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have permission and security issues with Vista/Win7, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
** Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.
Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.
-----------
If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out
Maybe you are looking for
-
Some buyers slow to activate Apple pay?
Hello I noticed in the SF Bay area many traders have the Apple player pay but don't have that it activated. Why a dealer have the drive but not that it is ready to use?
-
WE TRIED TO RESIZE THE COPY OF A DOCUMENT WHAT SHOULD WE DO? WE WOULD LIKE TO SEE EXPANDED. READ SEVERAL REVIEWS AND HIS DOES NOT. Help, please!
-
Is there anyone who can suggest why my HARD drive down. Kind regards. / Sunil
-
Can I use a working android code to build a pure Java application. I don't want the port directly. I want to convert an android app for Bb 10 working versions of a Java for BB 6.0 and 7.0 application verson etc.
-
Client VPN prevents internet access from other computers on the network
Hello. I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original mo