Hibernate error in algorithm using SDK "could not resolve property.

Similar Questions

• GLWB-10521: could not resolve the ASM label

  Hello

  I try to install Oracle Grid Infrastructure 12 c Release 1 on Windows Server R2 2012 in a hyper-v Lab (to my intention is to install a complete rac - later).  I created my ASM storage with the role of ISCSI target (4 discs 20 GB each, all the dynamic extension), and they are all visible from both nodes.  I can ping all the IP addresses of all servers involved.  I required prior tasks, and there is one thing that I am invited to check.  Error message is:

  «Device checks for ASM - there is a control to check the devices specified in the requirements for the ASM.»  Error:

  -

  GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA0' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.

  -

  GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA1' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.

  -

  GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA2' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform.

  -

  GLWB-10521: could not resolve disc ASM 'ORCLDISKDATA3' label to the path of unity on the node 'ORAN01DV' - Cause: could not resolve the ASM label to any device on the specified node.  -Action: Make sure the specified label of ASM is properly engraved on a device shared on the specified node and marked devices are accessible to the current user. To check the address record label use tools "Asmtoolg" on Windows operating system platforms and "oracleasm" on the Linux operating system platform. »

  I opened Asmtoolg, and everything seems to be ok in there (all discs are stamped and are visible etc.).  I recognize that this is a complex area, so I understand that it will be difficult to difficult to diagnose.  I was really surprised to not find anywhere, any success on the internet for the GLWB-10521 error code well.  Does anyone have ideas of things I could try?

  Thanks in advance

  There is a bug (Bug 20428707 : GLWB - 10521 RAC INSTALLATION)

  Re: GLWB-10521

• sqlplus ORA-12154: TNS: could not resolve the connect identifier specified

  Hello

  I am not able to connect to the database using sqlplus, using following command:

  sqlplus activites@OCA010

  I get the error message "ORA-12154: TNS: could not resolve the connect identifier specified.

  I tried to connect by providing the full as connection string: "" sqlplus activities / [email protected]:1521 / compix "and he succeeded."

  I also tried to connect using sql developer by providing network TNS alias 'OCA010' it is also successful.

  Someone could please help out here and let me know how can I connect using sqlplus using aliases TNS network.

  content of the tnsnames.ora file is as follows

  tnsnames.ora # Network Configuration file: D:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  COMPIX =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = compix)

  )

  )

  BC =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = BC)

  )

  )

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  OCA01 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = LUCKY-HP)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = OCA01)

  )

  )

  OCA010 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.10.3)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = compix)

  )

  )

  Thanks in advance.

  2931143 wrote:

  Hi EdStevens,

  I used option TNS with Alias network as 'OCA010' in Sql Developer.

  I checked in tnsping and tnsnames.ora directory is correct.

  Please find below the exit of tnsping:

  C:\Users\LUCKY>tnsping OCA010

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on October 29, 2015 21:07:38

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  D:\Oracle\product\11.2.0\dbhome_1\NETWORK\ADMIN\sqlnet.ora

  AMT-03505: failed to resolve the name

  Have you worked from the link I provided?  (I don't think you have time to do).

  It is possible that your tnsnames.ora is corrupted by some weird characters printable somewhere.  In some versions of the oracle, he might be sensitive to spaces vs. tabs.  If in doubt, netca to add entries, rather than doing it by hand.

• Unable to solve the ORA-12154: TNS: could not resolve the connect identifier specified

  Hi friends,

  I'm unable to resolve ORA-12154: TNS: could not resolve the connect identifier specified, error:

  C:\Windows\System32 > sqlplus scott/tiger@ORADATA

  SQL * more: Production release 11.2.0.1.0 on Sun Feb 2 13:46:10 2014

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  ERROR:

  ORA-12154: TNS: could not resolve the connect identifier specified

  SQL > select database_name from v$ database;

  DATABASE_NAME

  ----------------------------------------------------

  ORADATA

  SQL > select instance_name from v$ instance;

  INSTANCE_NAME

  ----------------

  oradata

  tnsnames.ora

  ============

  ORADATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP)(HOST=himanshu-PC) (PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = oradata)

  (SERVER = DEDICATED)

  )

  )

  Listener.ora

  =========

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = himanshu-PC)(PORT = 1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORADATA)

  (ORACLE_HOME = G:\app\himanshu\product\11.2.0\dbhome_1)

  (SID_NAME = oradata)

  )

  )

  SQLNET.ora

  ========

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  C:\Windows\System32 > lsnrctl status

  LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on February 2, 2014 13:53:37

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = himanshu-PC)(PORT=1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production

  Start date February 2, 2014 13:29:35

  Uptime 0 days 0 h 24 min 6 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File G:\app\himanshu\product\11.2.0\dbhome_1\network\admin\listener.ora

  G:\app\himanshu\diag\tnslsnr\himanshu-PC\listener\alert\log.XML log listener

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = himanshu-PC)(PORT=1521)))

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))

  Summary of services...

  Service 'ORADATA' has 2 occurrences.

  Instance "ORADATA', status UNKNOWN, has 1 operation for this service...

  Instance "oradata' READY State, has 1 operation for this service...

  Service 'ORADATAXDB' has 1 instance (s).

  Instance "oradata' READY State, has 1 operation for this service...

  The command completed successfully

  Kindly guide whats wrong with my setup.

  You can remove your tnsnames.ora if he isn't there the other TNS inside. and use netmanager

  http://docs.Oracle.com/CD/E11882_01/network.112/e41945/AdminTools.htm#NETAG216

  Concerning

• ORA-12154: TNS: could not resolve the specified connection identifier [10g XE]

  Greetings
  
  There are a lot of topics about this problem on the internet, but none of them deal with this issue properly, so I couldn't find a solution to the problem.
  
  I installed: Oracle Database 10 g Express Edition
  
  After that the installation was done, I opened the SQL command line
  and I used the command "connect" to connect
  I enter username
  Then I entered the password
  
  After a few seconds, I got the following error message:
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  Screenshot of the error:
  http://I35.Tinypic.com/14o26g7.PNG
  
  I installed this version of Oracle on Windows XP 32 bit and Windows 7 32 bit and I get the same error message when it tries to connect.
  
  Why Oracle does not immediately after installation?
  Are there other measures that need to be accomplished in order to make this work? If so I'd appreciate any help step by step, I was stuck trying to find a solution for days.
  
  Published by: user10192105 on August 22, 2010 19:34

  >
  I was able to connect using the above command, but I would like to know why can't connect using a user name and password? I still cannot connect using a user name and password even after the environment variable.
  >

  The problem is that the normal user accounts are either locked, you use is maybe not the right password or they may not have the necessary privileges to establish a session (there are a number of reasons).

  Since you are in the console database, you don't need the environment variable set. SQL * Plus Gets the location of your database in the registry.

  Make the alter statement that I posted earlier for a user which you know that there is and we'll take it from there.

  John.

• ORA-12514: TNS:listener could not resolve service_name

  trying to duplicate db on a remote server, the message, I was wondering how I can make work PMCO is on the remote server, if I add this in listener.ora it says no db name race
  
  Oracle: tulpcorpadb03$ rman TARGET sys/***@wcmp AUXILIARY.
  
  Release of Recovery Manager: 9.2.0.8.0 - 64 bit Production
  
  Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04005: target database error:
  ORA-12514: TNS:listener could not resolve service_name in connect descriptor
  Oracle: tulpcorpadb03$ tnsping PMCO
  
  AMT Ping Utility for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production on November 5, 2009 11:21:44
  
  Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved.
  
  Use settings files:
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = PWR_DB01-HA)(PORT = 1522)
  () (CONNECT_DATA = (SERVICE_NAME = PMCO)))
  OK (10 ms)
  Oracle: tulpcorpadb03$ sqlplus "sys/***@wcmp as sysdba;
  >
  Oracle: tulpcorpadb03$ sqlplus "sys/***@wcmp as sysdba;
  
  SQL * more: version 9.2.0.8.0 - Production game 5 11:23:06 Nov 2009
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-12514: TNS:listener could not resolve service_name in connect
  descriptor of

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=tulpcorpadb03) (PORT = 1521)))
  Summary of services...
  Service "PMCO" has 1 instance (s).
  Instance "PMCO", LOCKED status, has 1 operation for this service...

  BLOCKED is a problem & needs to be solved.

  local & remote control are meaningless from my point of view terms

  using specific host names avoids confusion

  Why 1 system uses use of 1522 & one other port 1521?

• ORA-12505: TNS: listener could not resolve SID in connection descript

  Hello!
  
  I have a teacher of XP SP2 on my computer. I installed Oracle XE, ODP as a customer. I clould connect to my db. Then I put the proxy data. Next day, when I started my computer, I clould not connet to db. I got an error: ORA-12505: TNS: listener could not resolve SID in connection descript.
  I change all *.ora files, but I checked and I found nothing. I started the lsnrctl and there was no xe services. I couldn't connect to the db with the Oracle SQLDeveloper. I have disabled the connection to the local network (without rebooting), then I clould connect to the db. Then I enabled the LAN connection and everything was OK. So, when I restart my computer I have to turn off the connection to the local network, and then connect to the db and activate the connection to the local network.
  
  What clould be the problem?
  
  Thank you.

  Hi Pavan

  Orace XE use CLRExtProc in the default listener.

  for example:

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
  (= Extproc PROGRAM)
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
  (ADDRESS = (PROTOCOL = TCP) (HOST = APPLIED - NB.datacom.co.nz)(PORT = 1521))
  )
  )

  DEFAULT_SERVICE_LISTENER = (XE)

  See you soon,.

  Francisco Munoz Alvarez
  http://www.oraclenz.com

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Error: Could not resolve &lt; s: states &gt; for an implementation of the component.

  So I try to the installation States in a Flex application, I am building, but it does not compile. I get this error:

  ./build.sh $

  Loading file configuration/Applications/Adobe Flash Builder 4/sdks/4.1.0/frameworks/flex-config.xml

  Uploader.MXML (24): error: < s: states > could not resolve to a component implementation.

  < s: states >

  Here's my build command nothing special...
  $ cat./build.sh

  #! / bin/bash

  mxmlc-bin/uploader.swf CBC/uploader.mxml of output
  I have a class that extends the application of the spark as follows...
  package com.uploader.controllers

  {

  Import spark.components.Application;
  Dynamics/public class FlashUploader extends Application
  {
  ...
  }
  }
  Then in my main application mxml file I use it like this...
  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx c:FlashUploader ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  xmlns:v = "com. Uploader.View ".

  xmlns:c = "com. "Uploader.Controllers.."

  minWidth = minHeight "709" = "400".

  skinClass = "com.uploader.skins.UploaderApplicationSkin" > "

  < fx:Style source = "styles.css" / > "

  <! - States - >

  < s: states >

  < name s: State = "default" / >

  < name s: State = "dΘmarrage" / >

  < name s: State = "submit" / >

  < name s: State = "normal" / >

  < / s: states >

  ....

  < / c:FlashUploader >

  Now when I try to compile, I get the error States. I found several examples and even made a dummy application just by using the application of spark and it compiles properly. Not sure if I'm doing something weird here, but a few other flex devs I know don't seem to see anything wrong with what I'm doing which could cause this.

  When you define an object using namespace, you will need to use the same namespace for its properties, so you will want to use "" instead of "" in this case.

• Error: could not resolve MobileApplication of implementation of components

  I use the 4.5 Flex command line compiler amxmlc. Here is my code (identical to the test code of the road, but not images):

  ******************************************************************************

  MobileTest.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:MobileApplication ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  firstView = "views. MobileTestHome">
  < / s:MobileApplication >

  MobileTestHome.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:View ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:components = "" Spark.Components. * ""
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  title = "Home" >
  < s:titleContent >
  < mx:Spacer width = "15" height="100%"/ >
  < s:TextInput id = "searchTxt" width = "100%" text = "Employee name" / >
  < mx:Spacer width = "15" height="100%"/ >
  < / s:titleContent >
  < s:actionContent >
  < s:Button id = "searchBtn" width = "48" height = "48" / >
  < s:Button id = "addBtn" width = "48" height = "48" / >
  < / s:actionContent >
  < s:List id = "emplist" left = "0" right = "0" top = low '0' = '0' > < / s:List >
  < / s:View >

  Directory structure:

  CBC

  -MobileTest.mxml

  -views

  -MobileTestHome.mxml
  ******************************************************************************

  When I run "amxmlc MobileTest.mxml" on the command line, the following error occurs:

  Error: Could not resolve < s:MobileApplication > to an implementation of the component.

  firstView = "views. MobileTestHome.mxml">

  What I am doing wrong? I'm new to Flex and I'm trying to translate the video Flash Builder Mobile Test Drive to open source flex, and this could be the source of error.

  found some info for you...

  try to add + configname airmobile = to the command line. you will also need a file airmobile - config.xml (must be in the sdk if you have not created yourself)

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!