Hidden navigation HELP!

Points hidden quizzes - Help!

Hello

So, I'm working on a Captivate project. Some slides within the project are quiz slides. I went through the project 10 times, and I'm still having the same problem. What I notice is that in the Quiz Preferences > pass/fail Options it is said there are 150 total points. Should be only 100. There is a button at the end of the project that reports the value quiz is 100. I have all no hidden buttons and looked carefully through the project and I can't for the life of me find it another button with a value of 50 points! Is there something that I am missing? Help, please!

Taylor

Hello

Could check you advanced Interaction (F9)? I suspect that you marked objects than normal question slides.

Lilybiri

Wmode, overflow: hidden, Firefox, help!

Well, the problem is that I had an area of very large document (2000 x 2000) because I mistakenly thought that the canvas (size of the document) should be larger than the largest size possible I would need to use (I am forced to use noscale for this project for a lot of reasons).

Anyway, I have a solution. Instead of using my settings object/embed 2000 width and height of 2000, I used instead '100% ' for both and then made the very small size of the canvas (1px). I did not know before, now the Player CAN and will display the content outside the size of the canvas, as a 'noscale' is set and width/height is set to 100% of the container it is in.

So, I changed these things and get my wmode settings, and that solved the problem was to have FireFox. As long as the size of the canvas of the flash animation is small, FireFox is not ignoring overflow: hidden. He did that only when the SWF file was a large canvas size when wmode was not present.

Thanks for your comments!

I had a DHL virus in my e-mail and now all my files are hidden, please help me

can some help me to open them?

Hello

read the information at the bottom of the below link to the subject of some malware that hide your data files and the cure for it regarding

Read article 17

http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

also follow the steps to remove given this malware

CS3 navigation help please please please

Hello

My head is made with the new AS3. I just can't figure out how to make it work properly. I have to click twice on buttons and transitions are not smooth at all.

I have 2 buttons in my film that I called but1, but2. When the user click but1 the film called mc_pampered should fade upward and play and when the user click but2 mc_learn film should fade upward and play. The films mc_pampered and mc_learn have the same size and each other so that they cannot all be visible at the same time...

Anyone that can help please I would be so grateful.

My code that I used it it is:

Import fl.transitions.Tween;

Fl.transitions.easing import. *;

Stop();

But1.addEventListener (MouseEvent.MOUSE_DOWN, MousedownPamper);

but2.addEventListener (MouseEvent.MOUSE_DOWN, MousedownLearn);

mc_pampered.Alpha = 0;

mc_learn.Alpha = 0;

mc_main.Alpha = 1;

function MousedownPamper(event:MouseEvent): void {}

mc_pampered.alpha = 1;

mc_learn.alpha = 0;

mc_main.alpha = 0;

mc_pampered.play ();

}

function MousedownLearn(event:MouseEvent): void {}

mc_learn.alpha = 1;

mc_pampered.alpha = 0;

mc_learn.play ();

mc_main.alpha = 0;

}

Thank you, Aileen

If the intention is to click on the buttons, then I recommend you use CLICK instead of MOUSE_DOWN.  As far as transitions go, you do not have everything, so I don't see why they would not smooth.  You import the Tween classes but does not have any code to use.  You must search the help documents the TWeen class and see how to set the constructor to create an instance of the Tween.

Problem with the display of help on hidden objects

Hello.

I started the conversion of an application to make use of the universal theme. The way I did is create a new system of menu navigation from this part of zero with the universal theme.

I loaded my old 4.1.0.00.3 application in my workspace and began to copy pages in my new app. The problem that I am facing is bound to the elements of the region that appear under certain conditions. When the items are hidden, the help icon is (surrounded by a circle point of mark) still visible, stand-alone meeting in the middle of the region. If you click on it it displays help for a field that is not visible:

So as you can see, there's a widget of self-help on the right side below the item earlier in the day.

I use the product Application Express Build 5.0.2.00.07

All advice appreciated.

Thank you

Clive.

Hello. Thank you. I ended up remove and re-create the item that did the trick.

I'm guessing that he in some way I messed up migrate objects from 4.1 to 5.

Navigation the user set

Hi all

EBS R12.2.4

RHEL 6.6

I'm sailing not much the end front of the Oracle Forms, so I forgot how to treat.

For example the form to define a user below, I forgot how to set a user or the application and the user.

How to query you an existing user?

I tried to enter the user name > SYSADMIN % then press F5 but does not work.

Help, please.

Thank you very much

MK

If you forgot the key yet, you can always go with the keyboard

Navigation: Help to her-> using the keyboard

-Kj

Cannot use a format on hidden object mask?

You can opt for the calculation calculation elements post parameter:

Enter a SQL or PL/SQL expression or a PL/SQL '' function; to refine the value of the element.

For example, if this element is named P1_X, you can use post of expressions calculation such as UPPER(:P1_X), INITCAP(:P2_Y), MIN(:P1_X,:P2_Y-200), NVL(:P1_X,:P2_Y), or a function like my_func(:P1_X) call; to set the final value of the question.
Note that these examples show expressions can refer to the current element, or they can refer to any other item in session state.

My Browser Based Air help does not work someone can tell me why?

I use Windows 7 and HR 8.

I looked the site Grainge, who said it was similar to a merger.

So, my project is a merged project I used that to make the browser function will help.

I accessed the .xpj parent, clicked on Adobe Air file and let it generate browser based around air where he wanted. It gives rise to a SSL folder and the folders for my projects merged were there. I consulted a fusion of the child folder and clicked on Adobe Air to generate air support of browser based in the appropriate folder. It appears, but it did not display when I consulted the file original parent.

So, I joined the company mother .xpj file again once clicked on Adobe Air and changed the homepage to c:\RHair82\HelpforSs.htm. What makes the path more runs.

She produced a file mergedProjects with folders for all my projects merged. However, it has not produced a SSL folder. Again, not able to display the child's record, but I couldn't access it from the parent file.

Can anyone help?

Thank you.

Pat

By default, the wizard will create a path to a folder in the. SSL! folder. However if you set the path as C:\MyAirHelp, it does not generate one! SSL! folder, it will just create C:\MyAirHelp with mergedProject underneath and you build projects from child to their appropriate folder, it.

You may need to generate all the projects of the child before it works.

The first thing I would check is that the installation works if you generate WebHelp. Also try to work with the download of my site. It is very basic and makes the resolution of the problems.

Post at the time you tried.

Some time ago I tried merged AIR Navigator helps so I need to watch it again and I can't do it tonight.

See www.grainge.org for creating tips and RoboHelp

@petergrainge

WiFi only works in safe mode

WiFi worked normally on my Mac Pro and then suddenly yesterday I received signal and an IP address but pages load. Other devices and computers work well with my wifi router. I can also surf the web very well when I boot in safe mode. However, when I restart my computer, then no wifi again. I can then go back into safe mode and get internet. I did no new software updates, installations or router configuration changes that may cause this problem from one day to the other. Anyone have any suggestions?

Since then, I tried the following:

-restart my router

-renew the DHCP lease

-flushed out DNS cache

"- removed 4 files of./Library/preferences/SystemConfiguration/" then restarted computer

-rebooted in safe mode

-reset the SMC

-turned off bluetooth

-hidden "iTunes Helper" elements of opening under my user account. The only listed element.

http://etrecheck.com/

What is this small triangle in the address bar just to the left of the button refresh which turns blue when the mouse passes over it?

Installed modules include:
Adblock more
Add to search bar
Easy YouTube Video Downloader
Hidden ELEMENT Helper for Adblock
Flagfox
Ghostery
NoScript
Tab Mix more
TinEye Reverse Image Search
Vertical toolbar
WOT

Hi ApolloSerenus,

You are probably referring to location bar history. If you click this button, a list of Internet sites must appear. This article will give you information about the history of compensation.

You should also look Awesome Bar - find your Firefox bookmarks, history and tabs in the address bar for other cool things you can do with the address bar.

Hope this helps!

Return to the last slide

Hi guys. My project has 2 blades help and we can navigate between them, (they are 2 and 3 of the slides). Slide 3 is accessible from any of the other blades, and from there, the user can decide what kind of assistance they need. My problem is I want the user to be able to return to the slide, where they accessed assistance. Of course, a simple button with a "return to the next slide" action is useless, as if they access the two slides help and then try to return that they are in the loop 'help '. So my question is "How do I do that?

As always, any help greatly appreciated.

Robbie

Here is the link: Navigation help glide - Captivate blog

I tried to update photoshop13 at least 6 times - get error code - U44M1P7

Yes, I downloaded and installed the extensions CS6 - no luck - the same error code - manager why the technicians to Photoshop are so difficult to install an update to a program that has paid a lot of money to buy?  Is there a simple download that would heal all the aggravation to get the codes to error because of the poor programming-my time as well as others is valuable and is very irritating when I lose someone with no result-' one out there have a simple solution - I just bought a new laptop with windows 10 so I don't think it would be the computer - David

Hi Newtobe,

This error that u44m1p7 is related to permissions, when the application is not able to apply the patch in a place because of a lack of permissions there.

1.0 folder location is - C:\Users\[Username]\AppData\Local\Adobe\AAMUpdater\1.0 - ( This is a hidden folder to display the hidden files/folder please see, Show hidden - files help Windows)

Please go through this document once more - "Installation failed" error U44M1P7 with Adobe Creative Cloud or updates of Adobe Creative Suite 6

If the document did not help, I recommend you check the log files, not referring to troubleshoot Adobe Creative Suite install problems with log files

Let us know if that helps.

Why this line in a mesh have a crease in there?

I have a mesh that I made of an ellipse, and at some point the edge changes direction completely before going to another point (see photo). The score of the right handle does not change the fold at all. Although step as extreme, this also happens to several other points of the mesh.

How can I fix? Ask if you need more info or pictures; I'm new to illustrator and don't know what info is relevant.

Because it has a hidden anchor "helper." Click on the 'more or less of the pen tool' and the hidden points will appear. Then you can remove them or change them as standard Bézier points.