Navigation the user set

Similar Questions

• Is any way to allow the user, set the value of a null datetime-local field

  Dear all,

  During development, I found that it is not possible for the user to set the value of a field to enter a non-empty value to null datetime-local.

  Take for example, the monitoring scenario

  -User set a track the date and time for a task

  -L' user wants to erase track the date and time of the task.

  But the controller of out-of-the-box made by webworks offers no way for the user to clear the values in the input of datetime-local.

  I would like to know, is there additional information about this limitation, or actually, there is a way to do this?

  Any useful information would be appreciated on this topic.

  Kind regards.

  Lawrence.

  It is advisable to add a "Clear" next to your input control button?

  The input control only allows you to select values for the value.  'Nothing' is not a valid date.

• Recomposition of desktop clears the user setting when you use persistent disks

  I'm in test phase of VMWare View, and I created my server administrator display and a server of composer. I was able to create jobs with the composer. Assignment of a user on the desktop and user can connect through the Client view. When the user logs on, they get a C: (Local disk) drive, drive D: (PersistentDataDisk) and a drive E: (SystemDisposableDisk). The user can create shortcuts and install their profiles of Lotus Notes and everything works great. The user can disconnect and reconnect and stay all settings. If I recompose the office by changing the initial snapshot used to create the office and place it on the office compound it clears all the settings of the user.

  I want to know if this is normal behavior or if the settings of users should be "replication" to the PersistentDataDisk and reloaded when the user connects again. I want to be able to have users customize their desk tops and others for their taste but have the ability to add modifications to the software via the Redial feature.

  Thanks in advance for your help.

  Josh

  A persistent record of the composer view should not be affected by a restructuring or a refresh operation.    Have you checked that the profile is being created on the disk D:\ sucesfully?    I remember problems in the past, if the user was connected to the image of the mother and then the profile remained on the C:\ drive instead of passing to D:\.

• Multi select values in Lov in the user setting page

  Hello
  
  I want to select muliple parameter of the user through LOV values and want to display the data in the report page based on multiple selected values.
  
  Can someone please guide me how I can implement it in the report of the APEX.
  
  Thanks in advance.
  
  Concerning
  Prabhat Mishra

  Prabhat,

  You said:

  I get all the data during the passage of several as 1092980,10031186 input parameter values.

  If I understand correctly; : P4_valor_sel returns a value of session separated by commas.

  This version of your code can not work?

  SELECT *
    FROM table_name
   WHERE INSTR (',' || :p4_valor_sel || ',',
                ',' || table_name.fieldname || ',') > 0
  

  The f

• Get the Date format that the user sets in "Preferences".

  Hello
  Is it possible that I can get the date format (for example: "DD-MMM-YYYY', 'DD-MM-YYYY' etc.) where the user desires under 'Préférences' in a page of the OPS?
  
  Concerning
  Hawker
  
  Published by: HawkerHunter on Aug 6, 2011 11:02

  ICX_DATE_FORMAT_MASK - is the value of profile that contains the value that is selected in the preferences page.
  You can try pageContext.getProfile ("ICX_DATE_FORMAT_MASK");
  in your code.

  Kind regards
  Krishnan guru.

• How to let the user to change the order of the lines inside a list box

  Hi all

  I need to display some values in a sort of list box and leave the user set their order by moving each row upward or downwards as he wishes.

  What is the best way to do it?

  Is there some sort of property node?

  Thanks in advance,

  Mentos.

  Use the list box.  In the Menu right click Watch "Drag And Drop".  I do remember not all settings on the top of my head, but you can allow dragging, dropping, disable the drag and drop out of control and make copy only.

  This should do what you want fewer knots of property.

• Do independent myRIO after the user has defined guidelines

  Greetings,

  I have a labVIEW VI that I write instructions in a text file on the myRIO and then the myRIO executes these instructions.

  I have seen tutorials that start the myRIO as a standalone application. But I need only become independent once the user writes information in the text file.

  Currently the user written instructions, and then click send to myRIO running then all tasks, even if the USB is still attached. After the user sets the instuctions, when they click on the instructions for sending, a message should then say rather unplug the USB of myRIO (this could be set to 10 seconds or something), then the myRIO performs the tasks as a standalone application.

  My project is the starter kit OR using the myRIO. I write instructions in the text file then the robot performs the tasks. The user never interfere with tasks, that the robot made, so the instructions are only sent once.

  Please note that I have a face before poster, I don't know how these screens still work?

  Thanks in advance for your help.

  Hello

  What you have said I think exactly as you want to do is not quite possible but you should be able to achieve the same thing by doing something like the following:

  A start-up executable running on the myRIO would allow him to run separate to the computer. You could then open communication to the myRIO of a separate VI on the PC to send instructions, and then close the communication for you to unplug the myRIO

  These links may help with some other reading on the executables to start on real-time targets:

  http://zone.NI.com/reference/en-XX/help/370622N-01/lvrthowto/rt_building_rt_app/

  http://digital.NI.com/public.nsf/allkb/E2F8C8D4270CCC62862574440054E894?OpenDocument

  Best regards

• IMAP proxy auth - logs as long as administrator if the user is absent

  While the synchronization of the accounts from the old server to OCUCS with imapsync script, I found today that when using IMAP proxy auth (with installation of OUCS 7u2 "vanilla") and specifying a wrong user name (unknown to OCUCS), the absence of the user set IMAP server, but imapsync continues to account for the proxy-admin user Sync messages.
  
  In my view, this means that the default of the proxy connection as user not valid succeeds always a proxy-user connection. (Or imapsync again this connection and that's the problem - I'll try this possibility of research too).
  
  If the problem is known to be one of e-mail server, all toggle to disable these connections as the proxy user and return a failure (absence of user account, incompatibility of word password, whatever)?

  When you say "proxy auth", you mean identifying you as the user admin and then using the "proxyauth' mail server owner command to switch to the other user?
  Or are you talking about using the plain SASL authentication and sending the

  For an example of the former, see MOS knowledge article Doc ID 1387203.1.
  For an example of the latter, see MOS Doc ID 1012047.1.

  If you do the first, it makes sense. You are logged on as an administrator and then tried proxyauth to another user, but it failed, so you're always connected as administrator.

  If you do the latter, I expect this connection failure. So if this is the case, please open a case of pension so we can report a bug.

• message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

  I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

  The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

• In FireFox 13.0.1 I can't open view in Google Maps. I get a blank page. I have two users set up on the computer, (WIn 7) and the second works OK

  Some other videos also will not work. I tried to run in safe mode, but that did not help. I had to use google chrome to see images.

  It started when my wife logged and a message "the user profile service has no logon. Unable to load the user profile.
  When I went in Firefox did not display most of the images such as YouTube. I failed in trying to set up a new user for my wife I did a system restore to several days earlier. It seemed to work, and in fact, Firefox seems to be OK. Then I updated plugins and when I returned to Firefox I can play Youtube videos but not others such as the Google Street View.

  All ideas

  Thanks for the help. I uninstalled Flash 11.3 and installed Flash 10.3. Everything works fine now.

• How to pragmatically set the name of the user event?

  In LabVIEW 2010, I register a user event during execution by using the function of events Reg, but I want to put the name of the user event, according to the runtime. LV said "If wire you a cluster at the entrance to the data type of the user events , LabVIEW uses the type name of the cluster in the event user name." But I need set the name of the event based on the data that is generated during execution.

  How can I pragmatically set the name of a user with data from cluster event at run time?

  I can do this by changing the text of the label of the bunch before I use Reg events function?

  How will I know what name the user never received?

  Thank you.

  I found a viable solution. I can create a user with a name known event. The event that is sent with the event data will include a Source DN string that identifies the sender of the event. The event handler can then handle each event based on the name of the Source. This is equivalent to have several unique named events, is only right they all share a common event data format, which is OK in my case.

  It works very well.

  THANKS for all the suggestions.

• concatenate the hexadecimal code set by the user for communication series

  Hello.. I'm a newbie to LAbView. I am trying to contact a power supply Source. for which my order will be in the format of 4 to 5 bytes; for example, to set a voltage of 220 VAC, it's 1509 0898 in hexadecimal, 15 of which is binding for all orders of shaky writing, 09 for various operations such as setting Volatge or FREQ. and last four digits 0898 is a 2200 (by 220.0VAC) hex code.

  By sending the complete command 1509 0898 in hexadecimal Serail port communicating my source, even in the giving them using string concatenation as 1509 is the first chain and 0898 in second, it works fine.

  But these last two bytes would be defined by the user and can therefore vary in digital, so I put a number of Hex code conversion there before concatenation. who does not send the code Hex 0898 as reqd.  but this garbage to send value... 3038 3938

  Help, please... Thanks in advance...

  Ermani salvation,

  Here is a step by step journey:

  

• How can I set up a structure of the event that sends text when the user presses the button "Return"?

  I'm new to programming of the Structure of the event.  I am trying a program which causes the content of a control to the string to be processed when the user presses the button back in after typing in the control of the chain.  I think (I hope!) that it is simple, I just can't understand how do.

  Basically, I would take the attached VI and change so that the user can send the value of control 'String In' to the indicator "String Out" either by pressing the 'Return' key or press the button 'send string. '

  Any help would be greatly appreciated.

  This example has nothing to do with the RETURN key specifically.  It fires all simply whenever the value of the control is changed.  If you click outside the text box or on another still controls the value changes and still the event is raised.  This is often the desired so if it works in your application, you good to go.

  You CAN ONLY answer a particular key if you wish.  Set your event to meet 'This VI' > key down.  Then, read the proposal Vcle on the left side of the structure of the event and compare it to the RETURN (for example).  The Boolean result of the comparison gets connected to a structure to deal with your code to run inside.  You can also wire Vcle directly to a case structure and execute different code based on which key was pressed last.

• How to set the user account stops after 2 minutes of inactivity

  I want to turn off my computer after a few minutes of inactivity and go back to my screen to the user. How do I get the XP.

  Hello

  You can install a power on the computer management and configure the setting below. See the link for the procedure: power management set up Windows XP: http://windows.microsoft.com/en-US/windows-xp/help/setup/configure-power-management

• I want to restore the factory setting. I press F8 and their credentials for 'user '.

  Original title: I tried to restore my computer and it shows the other user. What should I do?

  I have a windows vista Dell and I want to restore the factory setting. I press f8 when the computer starts and then I choose the repair option. After that, it shows a written page another user with two spaces a username and another for the password. I tried to write my username and leave the password blank, but it does not work. I want to know if there is another way to restore or if should I do something?

  Hello

  This is Dells use of their recovery partition information

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  For more information, contact Dell

  http://support.Dell.com/

  or try the dell support forums

  http://en.community.Dell.com/support-forums/default.aspx