Hierarchy in SPR

Similar Questions

• The hierarchy problem

  I have a hierarchy that has 3 levels. In total, intermediate level and level of detail. At the intermediate level, I have 2 items I want the user to be able to break through by and the functionality is that they can choose which of these items they want to drill in the. So at the middle level I category and group so the user can choose to break through by category or group. How can I reproduce this to the RPD.

  Hi Pinnocchio,

  In SPR, you can only configure hirerachy and his element at each level. You need to reproduce this in the responses. Create two reports by category and group. In the parent report goto-> link-> Interaction Action adds the two reports as a navigation target.

  Kind regards
  DpKa

• I can isolate a bookmark with the filter, but how 'find' a bookmark in the hierarchy of the ShowAllBookmarks window?

  I want to find a bookmark to its location in the hierarchy of bookmarks, but all I can do with the filter is isolate a bookmark [s]; or by using the filter bar bookmarks, or in the ShowAllBookmarks window. For example, I know I have bookmarked some, but I want to move it into a new "folder" and rename it, perhaps; for this I need to be able to * see * in the hierarchy, as in the Mac Finder, when the filter turns into a file, and then "Show Original" to "Open the enclosing folder."

  Watch these extensions:

  • Show Parent Folder: https://addons.mozilla.org/firefox/addon/show-parent-folder/
  • Go Parent Folder: https://addons.mozilla.org/firefox/addon/go-parent-folder/

• Where is bookmarked in my favorites folder hierarchy?

  I have a comprehensive set of bookmarks, organized into a hierarchy of nested folders. Sometimes the bookmark I want is not where I expect to be. I can find it easily by using the search engine to organize bookmarks and I can then move to where I think it should be kept, but I can't find out where it was hidden! I put it somewhere just as sensitive? She was stored or moved inadvertently to the wrong place?
  It would be useful that, when a bookmark is highlighted in the right pane of the window to organize it, its current location could appear in the left pane emphasizing and expanding its hierarchy of folders. If not, perhaps the full path to the bookmark could be given in a column in the right pane which can be made visible or not by the user by right clicking on the column headers of the usual way.

  Install Show Parent Folder: https://addons.mozilla.org/en-US/firefox/addon/7372/

  • After installation, tools > Modules > Extensions, click view the Parent folder, click Options, set your options, there are only 2 Articles.
  • After installation, the bookmarks > organize bookmarks, click views, click show columns, click Parent folder to place a check mark, the new Parent folder column in the right pane. Rearrange the columns in the right pane by dragging the column to the desired position headers.

  See also go Parent folder: https://addons.mozilla.org/en-US/firefox/addon/7377/

• Important, I can't find the table of the hierarchy for Sony - for a research paper

  Hello

  Student and a PS3 gamer.

  I need a chart of the hierarchy for Sony - for a research paper

  I thank.

  Hi J D,

  Welcome to the community of Sony!

  Unfortunately, the information on research in education or reports can be provided online. I recommend the book "MADE IN JAPAN", written by Akio Morita (our founder) as an excellent resource for the history of Sony and our products. You can also visit the following Web site for a detailed presentation of the history of the company:

  http://www.Sony.net/SonyInfo/CorporateInfo/history/SonyHistory/

  You can also view our annual financial report to:

  http://www.Sony.net/SonyInfo/IR/financial/ar/index.html

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• Organization chart... .to leave Vi hierarchy?

  I know that I went on this point the wrong way... probably the point #1 in the top ten things not to do when programming, not but...  (I'm not a software engineer, you guessed?)

  I have a state machine relatively complex vi developed and deployed and I don't have a chart for it. As I was only working on this, I know it all and how it works, but I need to have an overview for non-geeks out there, who will use the standalone version.

  Is it possible to generate a diagram of the VI hierarchy?

  or what is the best way to develop the organizational chart (not from the beginning..)

  Kind regards

  Leeser

  There is nothing automatic.

  Condition is not based on a construction of QSM (this design model can enable transitions that are impossible to document completely...), it can be done by hand with your favorite flowchart software (don't wince but I use paint and PP for this for so long I know all shortcuts and can do it quickly).

  I received the code developed by other groups and drwaing place the diagram of the State was the first step in the estimate of what would be needed to begin to support it.

  This thread is for some years on a similar topic and can be useful.

  I'm safely assuming that you have learned your leason for ' first, second document ", or do you want a conference?

  Ben

• Create ASAM ODS hierarchy

  I am configuring an ASAM ODS server. I already create the server, export the configuration, and installed on the client computer. Then I am able to connect from a client computer to the server but when I try to run the script to the hierarchy that does not work. My understanding of the forums another is that the script "main.vbs" to create the hierarchy should be run in tiara 2012 (I'm running with 2012 SP1 and still does not work).

  The first thing I notice is that after the conection icons are not the same in the interface ASAM (NAVIGATOR) and then when I run the "main.vbs" and "CreateASAMModelHierarchy.SUC" the error attached.

  Can you please help me with this problem?

  Neither Chei,

  In case you have the same problem as did nrin, here is once again this solution:

  To connect to the NI ASAM-ODS server with AOP5 please follow these steps:
  1. open the NAVIGATOR tiara.
  2. go to settings - data banks...
  3. Add a new data store. Or using the first button on the toolbar or via the context menu.
  4. enter a name, select the use AOP5 and click OK.
  5. in the following configuration dialog box, you must enter the computer name of the machine running the server OR ASAM-ODS.
  (This information is also displayed in the dialog box settings ASAM Manager DataFinder (DFSE)
  6. click on the [...] button in the URL line. In the next dialog box, select your server ASAM-ODS.
  7 leave the dialog boxes for configuring two clicks on the [OK] button and open the new data store in the BROWSER.
  8 download the creative hierarchy script that has been updated on January 27, 2014 and run in DIAdem SCRIPT

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Why don't I have a green exclamation point on one of my vi in the hierarchy of VI?

  

  Hi seafood

  Stay of execution

  
  

  Suspend execution of a Subvi to change the values of
  controls and indicators, to control the number of times that the Subvi is running
  before you return to the caller, or return to the beginning of the
  the Subvi execution. You can get all calls to a Subvi
  with the suspended, or you can suspend a specific call to a Subvi.

  To suspend all calls a slot - VI, open the Subvi and select Operate"
  Suspend when it is called.
  The Subvi suspends automatically when another VI calls it. If you
  Select this option when single-no, the Subvi does not suspend
  immediately. The Subvi suspended when it is called.

  To end a call specific Subvi, click the Subvi on the block schema node, and then select node Subvi
  The installation program in the context menu. Check the suspend when it is called to suspend enforcement only to this instance of the Subvi.

  "The window of the Hierarchy of VI , which view you by selecting view" VI hierarchy.
  indicates if a VI is interrupted or suspended. An arrow glyph, shown as
  as a result, indicates a VI runs regularly or not not unique.

  

  A glyph break, shown below, indicates a VI interrupted or suspended.

  

  A green break glyph, or a hollow glyph in black and
  White, shows a VI that stops when it is called. A glyph of Red break, or a
  Glyph of solid black and white, shows a VI that is currently
  pause. A glyph of exclamation point, shown below, indicates that
  the Subvi is suspended.

  

  A VI can be suspended and stopped at the same time.

  Determination of the current Instance of a Subvi

  
  

  When you hold a Subvi, calls list
  pull down menu in the toolbar list the chain of callers of the
  first level VI down to the Subvi. This list is not the same list you see
  "When you select go" callers to this VI, which lists asking them all screws regardless of whether they are running. Use call list
  menu to determine the current instance of the Subvi if block
  diagram contains multiple instances. When you select a VI in the menu calls list , its block diagram opens, and LabVIEW highlights the current instance of the Subvi.

  content above http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/debug_techniques/

• display the VI hierarchy window

  Hi all

  How do I call/display window hierarchy VI programmatically >?

  Thank you.

  
  

• How to create the hierarchy without creating a Subvi files

  Hello

  I have an existing LabView program that uses blocks of Subvi.  I want to change it so that I can't copy files Subvi (when I transfer the program to another computer).  The goal is to have a single file/program that I can copy, paste, and run on other computers.  So, I want to know if there is a way to create the hierarchy without creating a Subvi files or how to integrate the Subvi in the program.  My program and Subvi files are included here.

  Thank you

  Rocky

  You can create a version in an executable file.  It would be the most common way if you insist on having a single file.

  You could also build a source distribution in a zip file.  Then you just copy and paste the zip file and unzip it anywhere where you want.

• IviScope vs niScope hierarchy

  I use LabWindows/CVI to add specific calls to instrument existing at an IviScope driver wrapper.  I use a NO-scope (specifically a PXI 5114).  Up til now all calls have been to IviScope_ functions and all attributes used (get/set) were inherent attributes (IVISCOPE_ * defined in iviScope.h).

  I now need to add an attribute specific to the instrument using (or is it an attribute defined by class?).  Specifically, I need NISCOPE_ATTR_MEAS_OTHER_CHANNEL, which must be set before the use of the specific call of the instrument to niScope_AddWaveformProcessing value.

  I'm confused about the hierarchy of IVI - C class driver calls vs instrument driver specific calls.  Is it true that all calls to the functions IviScope_ are "converted" to instrument specific calls in the engine of the IVI (via the Configuration of the IVI store)?  If there is a recall for a specific attribute of the intrument will still be executed if I call IviScope_Set...?

  Here are the specific example, but I would like to answer widespread in all cases if possible.

  Given that NISCOPE_ATTR_MEAS_OTHER_CHANNEL is defined as a compensation of IVI_SPECIFIC_PUBLIC_ATTR_BASE,

  This call is legal:

  IviScope_SetAttributeViString (session, "0", NISCOPE_ATTR_MEAS_OTHER_CHANNEL, "1");

  and functionally equivalent to:

  niScope_SetAttributeViString (cHandleSession, "0", NISCOPE_ATTR_MEAS_OTHER_CHANNEL, "1");

  That said, if there is a defined calllback for NISCOPE_ATTR_MEAS_OTHER_CHANNEL that makes something more as defined a specific memory location (and would be executed if niScope_SetAttributeViString is called), will run this recall if I set the attribute via IviScope_SetAttributeViString?

  More generally, can I use function calls IviScope_ to set the 'elements' are defined (in niScope.h) in terms of compensation to the IVI Foundation (IVI_SPECIFIC_PUBLIC_ATTR_BASE, IVISCOPE_VAL_TRIGGER_TYPE_SPECIFIC_EXT_BASE, IVISCOPE_VAL_TRIGGER_COUPLING_SPECIFIC_EXT_BASE, IVISCOPE_VAL_ACQUISITION_TYPE_SPECIFIC_EXT_BASE, IVISCOPE_VAL_MEASUREMENT_FUNCTION_SPECIFIC_EXT_BASE, etc.)?

  All of the examples I see online on the use of the IVI drivers, videos for DMM examples, show the use of the specific instrument to function calls, no calls from IviDMM_.  This seems misleading and confusing.  I've not seen anything that addresses the use of IVI drivers at this level.

  Thank you for your consideration.

  
  

• hierarchy of export

  When I open a VI, this VI call other screws in a hierarchical structure.  Is it possible to any hierarchy of the screw shaft in a separate output directory, so I can't locate manually one by one?

  File-> save as... and select the option "Double hierarchy to the new location.

• The hierarchy scrolling bug window class

  With the help of LV2012, the class hierarchy window continuous scrolling originally, or to the last selected class (but only if selected by clicking on the arrow to show/hide children).  This makes the window almost unusable and I assume it is a bug.  Even if it keeps reloading and redraw the hierarchy of classes (every 2 seconds or 3?), it should not scroll when it does.

  I found one of the causes of this phenomenon.  I installed a package of TSVN Toolbox of the VSI.  In the settings, there are, check "Auto-Refresh" and a rates box.  In my view, it is set by default to checked and 5 seconds.  I disabled the feature.  However, everytime I open the settings of TSVN VSI, it causes the hierarchy update.

  I hope this helps others with the same problem.  I'll try to send a note to the subject of the VSI.

  -Kurt

• Show only the screws used to VI hierarchy instead of all polymorphic Versions of a VI

  Hello!

  When you pull the top of the hierarchy of VI for a program, you get a diagram showing all polymorphic versions of a VI used in your program (at least I do).  Is a checkbox hide somewhere that I did not find that put the screws in the hierarchy I call in my program?  For example, if I use the polymorphic VI 'DAQmx create Virtual Channel' in my program, and the "AI Input" version is used, I always get every version, which is several, figure in the hierarchy of VI.  This clutters the schema a bit.  Instead of an icon that appears in the hierarchy, it is instead of 20 or 30.

  Everyone there knows what can be done?  Thanks for any help you can give me.

  Thank you, Jeff, to confirm this as I was afraid of.  I was wondering where they were hiding this darn box!

  I guess that the code that creates the diagram hierarchy VI must have been written before polymorphic VIs and he travels find as all loaded screws to add them to the diagram.  When any one version of a polymorphic VI is called, all versions are loaded and found the code that creates the schema.  If only the specific version of a polymorphic VI takes over, then this theory does not work.

  If I helped you and I get this feature implemented, I am glad that I could be useful.

  I appreciate your response.

• Question re: display globals in the hierarchy of the vi

  I am an older (LV2009) application debugging which was written by another developer and includes a large number of global variables (~ 100).   When I discovered the hierarchy VI for the (rather large) VI of high level and I have the option "Include Globals", I notice that the icons for the various globals generally - but not always - have a number superimposed on them.  It does not correlate with the number of callers, the number of institutions, or level in the hierarchy, so I'm curious to know what it is supposed to represent?  Seems like this should be a trivial matter that it is easy to find an answer to, but I checked the forums help and discussion of LV and found exactly so far nada.

  

  Can someone enlighten me?

  Bob_Schor wrote:

  When you create a Global Variable, you end up saving them as a VI, with the default name Global 1(vi).  As with every VI that creates LabVIEW, it creates a default icon, and as it does for all the default icons, he assigns a number, starting with 1.  If you create several Global screws in a single session of LabVIEW, the default icons will be numbered 1, 2, 3...  However, if you stop LabVIEW after you have created the global with global icon 1, and then restart LabVIEW and create another world, its VI (which must have a different name) will have the same global icon 1.

  Bottom line - do you a favor and change the default icon LabVIEW to create so that the icon means something to you.

  BS

  In fact, I think that the OP has already done this.  I think it's the reason for the confusion in the first place; the OP was not used to seeing a default icon.  In fact, I was momentarily confused until I created a world as an experience.  Then I got a good laugh.