HierNodePropValue and default values

Similar Questions

• Updated lines and default values.

  This is my last thread for a while. My final problem with my apex application is related to the update of lines.
  
  I have a tabular presentation to display several rows for a table and want to add a hidden 'updated_by' and 'last_updated' column. I put their default values such as user name and sysdate that work well for new records, but how each line to add these to existing records?
  
  I use 4.02 on 11g.

  Hi Craig,.

  Have you considered using a trigger on the table instead of setting these values from the app? A few advantages are: less logical in the app, especially if these inserts/changes can come from several pages, and once the trigger is implemented it will define values independently from changes and insertions (your form, another form, a non-ApEx client app, etc.).

  CREATE OR REPLACE TRIGGER biu_mytable
     BEFORE INSERT OR UPDATE
     ON mytable    REFERENCING NEW AS new OLD AS old
     FOR EACH ROW
  BEGIN
     :new.updated_by := NVL(v('APP_USER'), USER);
     :new.last_updated := SYSDATE;
  END biu_mytable;
  

  Any insert or update triggers the shutter, define two columns. The NVL call handles the case when a customer non-ApEx brings the insert or update. If APP_USER has a value (ApEx logged-in user), the trigger uses it; Otherwise, it uses the database user ID.

  Hope this helps,
  John

  If you find this information useful, please indicate the 'useful' or 'correct' post so that others benefit. *

• motion presets, the size of the stage and default values - help?

  Hello

  I put a predefined query (zoom in 3D) on the movie symbol instance. It worked great - it zooms well, and the body remained at the center of the stage for the entire animation, which is what I wanted.

  I realized that I needed to change the size of the stage, for reasons that I won't go into. I've converted the measure from the scene of the pixels in inches and resizes.

  Of course, all my graphics and authorities were now out of the Center. Realign and resizing of everything, I discovered that my instance with the preset of the motion had gone down is more centered on the stage. Now, he moves diagonally right down to the right of the scene when played. In fact, now whenever I use this particular preset on anything whatsoever, in this file, and again those, the same thing happens. It's as if the preset was changed permanently on my computer and go back to the default value.

  I tried to change the path image by image, but it makes a mess. I tried using the Subselection tool to change the path, but it is imprecise and does not work well.

  Does anyone have words of wisdom for me?

  Either way, I loaded that particular file on another laptop here at work who also has Flash Pro. Until I opened my file on this new computer, this predefined query worked well. Now that I opened this file in the new computer, this preset is messed up, even when I start a new file.

  I am really confused and frustrated; I'd be very happy any idea that anyone could offer me.

  Thanks in advance!

  Hi Quynh,

  Thanks for your response! I finally realized that I was wrong. Obviously, the preselections of movement (or less than for the zoom in 3D) are only designed to work with the default stage size. I had changed my stage size, so the screened numbers were all off. But that's okay - I used it as a template to create my own, and it came out great.

  Thank you!

  Holly

• HP Officejet Pro 8600 and default values of Open Office

  I bought this printer about 18 months ago and have used it several times to scan documents and convert them into editable text. Output to MS Word and was brilliant.

  I was recently required to install Open Office and since then, the printer ran out of this program. The result is a confused mess.

  How can I tell the printer to use MS Word and not Open Office?

  Thanks for your help.

  Hello

  Locate a document scanned with HP software in your Documents folder.

  Right-click on this file and select open with and click on choose the program by default, and then select the word in this list.

  If she's not licted, click on the browse option and choose WinWord.exe in the Program Files folder.

  Hope that helps,

  Shlomi

• Cannot create bookmarks. New install, have disabled all extensions, tried safe mode and reset to the default values. Any help of any of these actions.

  Hello.

  Statement of the problem is very simple: Firefox won't create bookmarks.

  New installation with Mint 17. New generation of PC with Asus A58M-A/USB3 motherboard, AMD A4 6300 processor 4 gig memory stick.

  All Mint and Firefox packages are up to date.

  A new profile has been created for the test, Firefox has been started in safemode, purged and re-installed and reset to the default values. None of these actions have contributed.

  Here is the info according to the troubleshooting information in Firefox

  The application databases

  Name: Firefox
  Version: 33.0
  User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:33.0) Gecko/20100101 Firefox/33.0
  Windows multiprocessing: 0/1

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Mint search Enhancer
  Version: 1.0
  Enabled: true
  ID: [email protected]

  Name: elegant
  Version: 1.0.7
  Enabled: true
  ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}

  Graphics

  Description of the adapter: X.Org - Gallium 0.4 on AMD ARUBA
  Device ID: Gallium 0.4 on AMD ARUBA
  Driver version: 3.0 Mesa 10.1.3
  GPU accelerated Windows: 0/1 Basic
  Vendor ID: X.Org
  WebGL Renderer: X.Org - Gallium 0.4 on AMD ARUBA
  windowLayerManagerRemote: false
  AzureCanvasBackend: Cairo
  AzureContentBackend: Cairo
  AzureFallbackCanvasBackend: no
  AzureSkiaAccelerated: 0

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.frecency_experiment: 3
  browser.places.smartBookmarksVersion: 7
  browser.sessionstore.upgradeBackup.latestBuildID: 20141013200257
  Browser.Startup.homepage_override.buildid: 20141013200257
  Browser.Startup.homepage_override.mstone: 33.0
  dom.mozApps.used: true
  extensions.lastAppVersion: 33.0
  Media.GMP - gmpopenh264.lastUpdate: 1416067922
  Media.GMP - gmpopenh264.version: 1.1
  Media.GMP - manager .lastCheck: 1416067922
  network.cookie.prefsMigrated: true
  places. History.expiration.transient_current_max_pages: 80569
  plugin.disable_full_page_plugin_for_types: application/pdf
  privacy.sanitize.migrateFx3Prefs: true

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.7
  Version: 4.10.7

  NSS
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSSMIME
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSSSL
  The expected minimum version: 3.17.1 Basic ECC
  Version: 3.17.1 Basic ECC

  NSSUTIL
  The expected minimum version: 3.17.1
  Version: 3.17.1

  Experimental features

  What other information can I give?

  Thank you.

  Jim

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• Reset Windows Picture and FAX viewer as the default value for jpeg files after loading of Corel

  I put Windows Picture and FAX Viewer by default to open jpeg, tiff and other pictures, so it appeared as an option in the drop-down list to view attachments that have been downloaded. After loading the software Corel Draw, it is now the only option to open photo files even if Windows Picture and FAX viewer is always defined as the default value. How to restore Windows Picture and FAX Viewer as a choice?

  Have you looked into the Corel software preferences to see if you can cancel these associations?

  There is usually backup keys are created in order to return to the previously used application.

• The default value and after that use it as control

  Hello
  Currently I'm doing engine of labview, and I am facing a problem.
  When I connect to my Board of Directors through labview, it will relay last position to the global variable. After that, I have to go to loop, where I can refer change position to my narcotics control engine
  In short, I must control number, but this default value must be written by another function when I run vi.

  no idea how to do it?

  Let me know if any clarification is needed

• Definition of default values for the inputs of button and the cursor?

  Hello

  I use Labview 8.5.1 and have a few entries button and zipper-type on my front. How can I set some of them having specific (as opposed to zero) default values when the VI is executed?

  Thanks for the help

  The default value for the type of slide of entry (or button).

  Right-click on the control.

  Select "Operations on the data" > "default to the current value of doing."

• How can I change default digital and enum values in a Cluster of Def Type Strict?

  I have a Strict Type Def cluster that contains 10 digital controls and a number of enums.  I have changed the default values for the digital controls in the strict Type Def, in customize mode, carried out a 'course values Default do' and did a 'apply changes' and recorded.

  This group is used in various places throughout the project and have not found a way to make the default cluster values change downstream.  Strict control Type (STD) Def seems to have good values on the front panel.  But if I place an instance of this on a white façade and do pass a wire of him in the block diagram with a probe and an indicator, I still get the old default values being passed against the STD.

  and still another approach is mentioned in my nugget on definitions of types found here, where I include this picture

  

  To illustrate how a wrapper around the constant type-def avoids not only the "problem of the explostion" (largely set by the new LV 2011 for display as icon feature) can be used to set the defaults AND allow some documents explain what, where and why.

  Ben

• Permanently change the default value of the police and the size in hotmail

  I know how to change the size of police and style in hotmail for each email but not how to change the default value.

  Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon.

  Mick Murphy - Microsoft partner

• Want to change the WordPad default values for font size and line spacing

  I use WordPad quite heavily because it is simple and fast.  But the new version of W - 7 seems to not allow you to change the default values for the font, size and line spacing.  The default values are not suitable for a large part of what I do and I'd like to find a way of quickly and easily, either make the changes permanent or change this to open with a single click of mouse or at most two.  Any suggestions?

  It is the "best" solution to workaround.  After you change your Default.rtf custom, simply move it to your system32 directory and add the "Default.rtf" at the end of the location of your target on the property sheet for your file WordPad.exe.

  Every time that you open its default location in the directory c:\program files\windows NT\Accessoires WordPad.exe, it defaults to now your Default.rtf custom.

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.

• Permanantly disabling "Install Google Toolbar" and change the default value for future updates

  I use Adobe products for years and, in general, is that Adobe produces some really useful tools for users of computers and productivity.  Thereby, ever time I get notice of an 'Adobe Flash Player' update I have to answer the same questions during the update / install process.  During the installation of the installation application ask if I want to install the toolbar 'Google', and the default value is Yes, then I have to uncheck the box before installation or I receive the software on my system I do not want or do not want.  In addition, towards the end of the update, the installation application provides three options on future updates:

  (1) download and install automatically

  (2) ask before installing

  (3) never install...

  And each installation I have to uncheck the installation of "Google Toolbar" and tell them that Adobe 'ask me... ' "before you download and install future updates.

  Is it possible permanently disable toolbar Google and by default my response to the update download and install question to always be 'Ask Me' first?  Adobe's witnesses crossing the machine during this process, so please do not suggest that it is not possible.  Adobe simply needs to modify the setup package to find these cookies and apply preferences users for the installation process instead of constantly trying to push unwanted applications and choices to the user.

  The displayed offers are based on the OS and the browser used.  If the two of you are essentially correct, for the browsers you use.

  If you opt in background updates, update option = allow Adobe to install updates (recommended), Flash Player will be updated within 24 hours of a new version is released.  If you use several browsers that use different types of Flash Player (for example, IE & Firefox) all drive types are updated within 24 hours of the new versions available.

  If you opt in notification updates, update = option Notify me when updates are available, the update notification generally appears within 7 days of an update is available and it is after that the system was restarted or that you log on/off voltage.   Opting to put up-to-date will launch the browser to a download page to download and install Flash Player.  If you use several browsers that use different types of Flash Player (for example, IE & Firefox) as the type of player who set the notification of update is updated.  The other type of player is not updated.

  Essentially, opting in the background updates will update all types of drive on the system within 24 hours and avoids downloading accidentally offers from third-party vendors.

  Note: there are slight differences for OS X updated behaivour but since you have Windows I described the behavior under Windows.

• I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I ha

  I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you

  Hello

  Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.

  You can do it from the control panel as well.

  This would make CD player as default PDF Viewer.

  Concerning

  Sukrit diallo

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.