High level electromagnetic Satellite R830 show

Similar Questions

• Cannot create high-level arrangement positions in muse 2015.1

  Weach I create a shape custom as a rectangle, square or menu on nav on the master page and select 'organize-face' when I go to see on my other pages, forms and nav menu always scrolls behind all other elements on this page. I guess that if create you something on a master page and have high level it should always show above all other elements, but it's not. Why? In addition the possibility of effects of scrolling is disable when you use a fluid response. Which causes other problems.

  Go to your master page, open the "Layers" Panel, create one new layer above all the others and drag all the elements 'top' on it. Be aware that the layers are working throughout the site, not to the scale of the page!

  Scroll effects: in sensitive pages does not effect of scrolling for now! At the same time, it should be clear to all users of Muse, because this is stated in the release notes, in the help files, and here, in this forum, we have tons of detachment about '"scrolling effects'. Simple use of the find command!

• Satellite R830-1GZ - CPU usage high (> 25%) and increase in the speed of the fan after reactivation

  Hi all

  The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I noticed that when this produces the system interrupts - delayed appeals procedure and Interrupt Service routine appears in the resource monitor > CPU > process and seems to explain the increase in the use of the processor.

  Any ideas on how to solve this problem would be most appreciated.

  I use a Toshiba Satellite R830 1GZ with Windows 7 (64-bit). This problem will not occur when I use the same mouse with another laptop (Dell with Windows XP).

  Thank you very much.
  CM

  > The CPU usage of my laptop shoots upward to 25% (and beyond) and increases in fan speed considerably after waking up, but only when I use an external mouse (Microsoft Natural Wireless Laser Mouse 6000) - disconnect the mouse once it happened does not solve the problem, so I always have to restart my computer if I let go sleep with the connected mouse.

  I think that the process that controls the mouse MS WLan does not close properly.
  The system to memorize it and therefore the cooling module begins to spin faster because these processes stressed the central unit.

  Maybe its caused by the mouse driver
  Have you checked if there is an update to the driver?

• Satellite R830 - support Sata III for SSD drives

  Hello

  Why Toshiba Satellite R830 does not support Sata III, although the plug to motherboard. indicate that it is possible?

  So you can not significantly increase the performance of your laptop by replacing the HARD drive with disk SSD Sata III. Is it possible to activate the Sata III (6 Mbps) on R830?

  All the system settings? It's also kind of bios update request necessary support SSD and SATA III...

  Any help is appreciated! :)

  > It shows that SATA III is supported, but when you install the SSD SATA III disc it does not work with higher speeds to ~ 250 MB/s (cases Crucial M4).

  From my own experience many SSD readers need a updated firmware that is provided by the manufacturers of SSD drives.

  But readers in the R830 SSD seems to support these specifications:
  Host interface: Max 300 MB/s
  Reading data supported: Max 250 MB/s
  Writing data supported: Max 160 MB/s

  By the way: the R830 supports a Mobile Intel HM65 Express Chipset and the chipset supports the storage interface high speed supports up to 6 Gb/s transfer rate for improved data access. Provides up to 6 SATA ports, 3 Gb/s with up to 2 ports support 6 Gb/s transfer rate.

• Satellite R830 - HDMI port does not work

  Hello

  Is there a driver for the HDMI for the Satellite R830 port?
  It is no longer connects to a TV.

  I tried different TV but still nothing.
  Also there is no HDMI in under the control panel Device Manager, should there be?

  Thank you very much for any help or advice.

  Hello
  I put t know what Windows system that you use on this laptop, but the driver HDMI isn't available from the HDMI port driver is part of the system and should be recognized automatically.

  Capacity Audio HDMI you need to install the right audio driver and should allow this in Control Panel-> sound-> playback device

  HDMI (digital out) would be not listed there, right click and choose:
  Show devices disabled, view hidden devices.

  Usually the HDMI connection isn t very delicate. Everything should run automatically.
  Connect both devices with a HDMI cable.
  Turn on the TV, then the computer.
  Now, use the exit function FN (key) video combination in order to get to the video (HDMI).

  Note: the correct HDMI channel must be selected on your TV

  All that s

• Satellite R830 random freeze with no way to take back control - full fan speed

  Hello
  I've been Googling autour for a bit now, looking for a solution to what could be a hardware problem.

  Randomly my Satellite R830 suddenly freezes and the speed of the fan running at full speed. It's actually a useful way to be immediately aware that my computer crashed. Everything is frozen, the only way out is to force via the power button.

  I hit the same description on several Web site for different models of Toshiba, return of 2009. It seems that the problem is still there! I also read testimonials from this problem for Windows and Linux OS. I use a Debian Squeeze, which does not detect the newspaper when the accident occurred.

  Sometimes it can be fine for a week, but recently, the computer freeze at least once a day, which is not acceptable for a new laptop.

  I am really getting concerned if something will be done soon, or if I should ask for an Exchange and pray to be spared. I use my laptop on a daily basis for professional use, and so I would definitely prefer another solution. I have been waiting for 4 months now and just update my BIOS 3 days ago from Web site of Toshiba with no noticeable improvement. the computer crashed 4 times in the last 2 days.

  If someone managed to overcome this problem, I would be very grateful for the tip!

  Hello

  A question: do you have a fingerprint reader?

  I got this Toshiba document that describes a problem similar to yours.
  This problem can be caused by old fingerprint software you need to update this software where you have a fingerprint reader.

  + Intermittend hang up or freeze your machine (possible high rotation FAN) on Windows 7-32 Bit / 64 Bit +.
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

• Problems with online information product Toshiba Satellite R830

  Hello! I just bought a Toshiba Satellite R830-146 with the following general specifications:

  OS: Windows 7 Home Premium
  CPU: Intel i5 - 24010M
  RAM: 4 GB DDR II
  HARD DRIVE 640 GB

  I had install/configure these days.

  In addition to the original, Aministrator account, I first worked with what turn on the machine and the installation/configuration of starting the process, I had to create another account to user with administrator privileges. The reason? Because the settings of Internet Explorer 9 in the original Admin account were somehow gone corrupt: some web pages that I absolutely have to work with because of professional reasons cannot be properly charged more, and these web pages are only compatible with Internet Explorer, not any other browser, Mozilla or anything like that. After several hoyrs work trying to solve this issue, I couldn't find a way to solve it.

  So I created a second administrator. User account (with the intention to delete the original Admin account if it worked OK); and in the admin again. account 9 IE works fine in any web page but I this is my problem with the Toshiba application online product Info begins.

  Namely: Toshiba OPI app doesn't work at all in the admin again. user account, even if it worked perfectly in the original account of amin - and it still doesn't work (I haven't dared delete the admin account of origin). When it is running in the new account admin, Toshiba OPI shows only an error message. I tried with UN-install the utility, then put it back in the admin again. account - no result, problem still there and Toshiba OPI still works fine in the oldest account where the IE 9 settings are corrupt, but false in the new, where everything works fine.

  So, why don't I just uninstall Toshiba OPI, delete the older admin account and forget all about?, you ask. Well, because among all the specific software Toshiba provided with my machine, this seems to be the one and only piece of software that maintains a current alert on, locates, downloads and installs the necessary drivers, BIOS updates and other. Software specific to the computer of the machine it does basically what Windows Update performs the operating sistem. Like many other users, I usually end up uninstalling the pre-installed software, specific LABELTEX, most of the machines that I buy, because it most of it isn't useful. But I still like to preserve the piece of software specific LABELTEX update which is updated regular with LABELTEX criticism or specific patches to the computer/model instead of having to regularly visit Toshiba support & updates page to see if it is something urgent. And this piece of software in question seems to be Toshiba OPI utility, in this case.

  So I wonder if anyone has a diagnosis of why this does not work in all the admin. accounts (and no, the problem isn't that I do run the program with two admin accounts connected and active I already checked that), and how could I solve apart from uninstalling the Toshiba OPI and oblivion, that would be very easy , but I would not do.

  Thank you very much in advance for your help.

  In the last years I ve changed 3 portable Toshiba and the first thing I did was to remove the OPI and several other specific applications of Toshiba. Why? All of them start with Windows, slow start-up of the laptop, run in the background for nothing.

  My experience Toshiba doesn't offer new things every day, so in general you can use OPI every two months to check whether or not something is offered again. You can do this when you start your laptop with the original admin account.

  You know, that these questions are not easy to explain. Toshiba has tested pre-installed software and functionality with the original account. Who knows what is corrupt with your admin account and what have you done in the past.

  In my opinion, if you want to keep your configuration, stop OPI to run with your extra account and be happy. Each connection of two months using original admin account and check for updates.

• Structure of good app to make high-level navpane on pane tabs?

  What is the structure of the correct application for objectives menu navigation, slide-top like for example 'settings' and 'About' pop on top an application with a tabbed pane as its structure of high level, in a navpane - like fashion?

  See for example the menu of top-parameters for the BB10 calendar application.  At the top of the structure nav app we have tabs views for the month, day, week, agenda, etc., but no matter what the tab showing, we are on, settings page invoked since the application slide-top menu appears on top of the active tab.

  When I try to place a TabbedPane inside a NavigationPane, QML editor gives the error message:

  "'FirstPage' default property value type mismatch. Waiting for Page and found TabbedPane. »

  I guess I could put a navpane within each tab, but first of all, it's bad code factoring for slide-top action menu (it should be set in one place), and secondly, it would require me to determine the active tab in the menu slide-top manager and push the target page navigation - from the active tab calculated.

  Conceptually, I'm trying to do something like this:

  import bb.cascades 1.3
  
  NavigationPane {
      id: navigationPane
  
      attachedObjects: [
          ComponentDefinition {
              id: infoPageDefinition
              source: "asset:///infoPage.qml"
          }
      ]
      Menu.definition: MenuDefinition {
          actions: [
              ActionItem {
                  title: "Info"
                  imageSource: "asset:///images/ic_info.png"
                  onTriggered: {
                      var infoPage = infoPageDefinition.createObject();
                      navigationPane.push(infoPage);
                  }
              }
          ]
      }
  
       TabbedPane {
  
           tabs: [
               Tab {
                   // Tab 1 stuff
               },
               Tab {
                   // Tab 2 stuff
               }
           ]
       }
  
      onPopTransitionEnded: {
          // Destroy the popped Page once the back transition has ended.
          page.destroy();
      }
  }
  

  in order to have a similar structure to the calendar app nav app.

  You don't need to have the specific content of the tab inside the tab itself. You can use a NavigationPane + Page with tab specific containers, move that visible on the signal of onTrigger tab. Then, you can push everything you need on top of the NavigationPane.

• How to see the/say high level group/directory

  So I have a script with the help of this forum to change styles, but the only problem I have still is I don't know how to say or show the top level of a style (so not in a group).

  Here's the code below, basically I just need to know what to put in instead of groupold/group when the style that I want to use is not in a folder/group. Thanks in advance.

  replaceStyle("Old", "H1", "new", "ActiviyH1");
  replaceStyle ("Old", "H2", "new","ActiviyH2")
  
  
  function replaceStyle(GroupOld , find, GroupNew, replace){
      try{
  var myDoc = app.activeDocument;
  importedStyle = myDoc.paragraphStyleGroups.item(GroupOld).paragraphStyles.item(find);
  ApplyStyle = myDoc.paragraphStyleGroups.item(GroupNew).paragraphStyles.item(replac e);
  importedStyle.remove(ApplyStyle);
      }
  catch(e){
      //alert (e)
      }
  }
  
  

  Hello

  Change a function:

  function replaceStyle(GroupOld , find, GroupNew, replace){
      try{
  var myDoc = app.activeDocument,
  importedStyle = myDoc.paragraphStyles.item(find),
  ApplyStyle = myDoc.paragraphStyles.item(replace);
  
  if (GroupOld) importedStyle = myDoc.paragraphStyleGroups.item(GroupOld).paragraphStyles.item(find) ;
  if (GroupNew) ApplyStyle = myDoc.paragraphStyleGroups.item(GroupNew).paragraphStyles.item(replace) ;
  
  importedStyle.remove(ApplyStyle);
      }
  catch(e){
      //alert (e)
      }
  }
  

  You can call it as:

  replaceStyle ("", find "", replace) or

  replaceStyle (0, find, 0, replace) or

  replaceStyle (undefined, find, undefined, replace)

  for higher level styles

  Jarek

• Top-level folder does not show the level lowver photos - Lightroom2

  I have my photos stored by year and its location on an example of hard drive

  2009

  Heaven

  April

  Hell

  April

  Remember that each higher level would show subfolders plate which allowed me to sort on the sides, etc.

  Now that the background more folder has the County...

  2009 0

  Sky 0

  April 20

  Hell 0

  April 5

  I tried all import into a new catalog with chance np... Only the bottom folers most seems to have the County

  How did I break it?

  You must enable include photos, in subitems (I think that was the name) in one of the menus in the library.

• editing file of higher level page homepage

  editing file of higher level page homepage
  
  When I had these files
  
  
  I type server/mywork/bkb
  
  These files are located in the server under the mywork/bkb folders
  When I type the server/mywork/bkb
  The my index page show
  It is very good.
  
  Now, I created a page called highestpage.cfm
  The goal is for me to put the myindex.cfm link and it works fine.
  
  
  But my problem that I'm really still confused is
  
  It will appear when I type bkb/mywork/serveur/myindex.cfm
  
  But my purpose is not of type that far.
  
  I just want to type I type server/mywork/bkb/without myindex.cfm
  
  And always lead me to I type serveur/mywork/bkb/myindex.cfm
  
  As with the previous version
  Server/mywork/bkb that lead me to myindex.cfm
  
  but only now lead me to highestpage.cfm
  
  I hope I express my self properly.
  
  Thank you for your understanding
  

  If I understand your situation, you can accomplish this by defining the names of web page by default on your web server, whatever that may be - Apache, IIS, etc.. The web server has some names of default files (web pages) that will be used if no specific file is requested. It is often index.html, index.cfm, etc.. You want to add myindex.cfm to this list.

• I need to stop a download of the query, I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not who have, or want to buy.

  I need to stop a download of the query, that I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not have that, or I want to buy it.

  Motion IS a stand-alone application. It is mainly designed to make effects for Final Cut Pro X, but it is not necessary to have with FCPX nor is it necessary to have FCPX to create projects for other purposes. When you open the query, simply select project of work outside the FCPX motion. You can save regular projects of Motion anywhere on your system.

• Satellite R830 and Windows 10 question webcam

  The Microsoft Upgrade Advisor said that my Satellite R830-182 would be allowed to switch to Windows 10, so I made the leap. Everything works fine, except the webcam of Toshiba. Device Manager States "the drivers for this device are not installed (code 28)" and click on "update drivers" is futile.

  The Toshiba site looking for an updated driver, I found that this model is not in their models supported for Windows 10, despite the advice of Mrs.

  Anyone know if there is a way around this problem (another pilot?), or it is impossible to get this webcam works in Windows 10?

  Thank you.

  Jon

  I have exactly the same problem with my Tablet still WT - 8A - 102. after upgrade W10. FAO memory exceptions and closed software system with a blue page

• Satellite R830 - reset password

  Hello

  I have a Satellite R830. As I closed it down an opinion seems to say keep until finished updates. At the end of the updates, the laptop closed and then restarted. PASSWORD of the screen when it is restarted on a black background: _ appears with the blinking cursor. I tried all the passwords I can think of including the administrator password. Laptop stops after three attempts. Any ideas of what password is required and if there is a safe mode to restart?

  Thank you very much

  PASSWORD of the screen when it is restarted on a black background: _ appears with the blinking cursor.

  Sounds like a BIOS password.

  But to be honest, the story seems really strange to me... I never read the BIOS password which could be resolved automatically during the update of the system...

  However, if this is a BIOS password and if it is unfamiliar to you, well, then you will be needing additional assistance of authorized person... authorized service provider is able to remove unknown BIOS password.

• Need a small part of my Satellite R830 - 1 L 7

  Hello

  I'm looking to get my hands on a small part for my laptop Satellite R830 - 1 L 7. The part is the protector of small silver hinge there are two on the laptop; one on the left and one on the right, just below the screen. One of mine came loose and was lost, and the sons are now dealt with under.

  It would be great if someone would be able to help me find one, and I'll give you as much information as I can, if anyone thinks that they will be able to help.

  Thank you very much.

  Hello
  You mean the screen hinges or hinge protector?
  However, I assume that the two parties could be ordered in local Toshiba authorized maintainer.
  Accredited maintainer will be able to order all the compatible parts for your laptop, and from my point of few, this is the best place where you could make any order the part.

  Do you know how to find the service partner?

  See this page for detailed information about all available worldwide FSA:
  http://backupmedia.Toshiba.EU/landing.aspx