Highlight selected tree-point

Similar Questions

• Why my point chronological marker highlight / select the clip that it is parked?

  Cannot find anything else online to anyone with this glitch.  I can't find a preference that could put out of service.  Is this a bug?

  When I play through the timeline, whenever I stop, the clip on which the chronological marker is parked gets highlighted / selected.  Also happens if I rub it or simply click somewhere back in the timeline bar.  The clip below that it gets highlighted - usually the video clip in the foreground; otherwise it'll hit the audio clip in the foreground.

  Running Pr CC2015 9.0.1 (36) on a new Mac Pro with 64 GB of RAM.

  It's not a big deal, but it's boring and since I couldn't find someone else with the issue, I thought I would bring.

  Thanks for all help!

  A

  Check/uncheck this option: sequence > selection follows playhead

• Value of the selected tree node

  Hello
  
  I'm new to Apex (4.1.1) and I'm having a small problem.
  I had 2 Pages. The frist one is composed of a treeregion and a "submit" button.
  The Second is a report.
  
  I want to create a workflow, the user selects a treenode shipment and presses. Then it will be redirected to the reportspage,
  that will show him a report according to the treenode that he selected on the first Page.
  
  Problem:
  I don't know how I can read the value of the selected treenode.
  
  I hope you can help me.
  
  Thank you
  Frédéric

  Hi Frederic,.

  To get the value of the selected tree node, you can make use of the "selected Page element node' attribute on the attributes of the tree page. Just create an element of your page and set the "Page of selected node element" of this new item page. Then fill the point via the BINDING of your tree query parameter. For an example, take a look at the following: http://apex.oracle.com/pls/apex/f?p=36648:6, where I put my point page P6_SELECTED_NODE to the value of the node selected in the first tree that is empno. Your report query must refer to the node selected item "Page, to make sure it displays information about the selected tree node.

  I hope this helps.

  Kind regards
  Hilary

• By selecting a point of the circle shape path

  Hello

  I'm working on an AE project where I am placing a circle described on a wonderful IMAGE that has a circle as described. I need them to be excatly the same. Now I am trying to only select ONE point (bottom center) of the circle shape and move it, instead it also moves upward to the center one, I don't want to. I searched the internet but it did not help me.

  Kind regards

  Amir

  

  You do not have the path of selected sahpe, only the bounding box of the transformation of the group. as parametric elements must be converted into editable classic tracks. Read the help.

  Mylenium

• After effects 3D camera track, do not select track points

  Hi ~!

  I have a question on the follow-up of the camera in After Effects. I followed this stage/photo before and it worked fine, but I could have pushed a button that turns off the ability to select the points tracking / hovering above them does not give me a target/bubble either. (I'm still able to view all the points of the track, just cannot interact with him!) I tried in a different project and it works very well, but every time that I open it again my project the same continues to be even after I retrack and still solve it.

  Any tips? I would like to know if my problem is understandable! appreciate the help, thanks

  It is Ctrl/Cmnd + shift + h. If this does not work go to the view menu:

  

• Trim shortcut does not always select edit points

  Hello my trim mode shortcut still works. When I press T, most of the time, nothing happens. I checked in my keyboard shortcuts and T is indeed the key to the trim mode.

  I found that if i maually select mount points, and then press T to happen in balance mode, but only for that edit point. If I press up/down mode of trim will disappear until I select a point of editing again.

  If I press T and not have everything change selected points the program respond not at all.

  Mode previously topping was functioning normally, but I started a new project, and I don't know why he stopped.

  I have Adobe first CC and I'm sure it's the latest version since I was only 10 days in my trial period.

  "T" will not pass to the nearest point on targeted tracks edit.

• Impossible to highlight / select text in detailstamp aspects of a table

  Hello
  
  We have a table in a single page with facet detailStamp. Inside of the facet, we have panelGroupLayout. In the panelGroupLayout, we have some elements of inputText readonly.
  In Internet Explorer, we are unable to highlight / select the text in the inputText.
  I want to copy the text displayed in the inputText detailStamp.
  I am able to copy text in Mozilla Firefox. But I could not copy in Internet Explorer.
  
  Here's the code for table...
  
  Thanks in advance...
  
  < af:table value = "#{bindings.searchResultsIterator.dataControl.dataProvider.collectionModel}" id = "searchDiscrTbl" var = "row" rows = "#{bindings.searchResults.rangeSize}" displayRow = "selected"
  emptyText = "#{pageFlowScope.discrepancyView.emptyText} ' fetchSize =" #{(bindings.searchResultsIterator.dataControl.dataProvider.collectionModel.rowCount & lt; (bundle. FETCH_SIZE))?
  bindings.searchResultsIterator.dataControl.dataProvider.collectionModel.rowCount
  : (bundle. "FETCH_SIZE)}" queryListener = "#{bindings.searchResultsQuery.processQuery}" varStatus = 'vs' sortListener = "#{bindings.searchResultsIterator.dataControl.dataProvider.processSort}".
  selectionListener = "#{pageFlowScope.discTblSelListener.onTableSelectionChanged} '"
  rowSelection = 'multiple' summary = ' #{bundle. " ContextMenuId summary}"="rightClickPopup"binding =" #{pageFlowScope.discrepancyView.discrepanciesTable} "rowBandingInterval ="0">"
  * < f: facet name = "detailStamp" > *.
  < af:panelGroupLayout layout = "vertical" inlineStyle = "width: 80%;" id = "pgl7" >
  < af:panelGroupLayout layout = "horizontal" inlineStyle = "" margin-left: 50px; "halign ="left"valign ="top"id ="pgl8">"
  < af:panelFormLayout lines = '2' labelWidth = "75" id = "pfl9" >
  < af:inputText label = "#{bundle." CORRECTED_BY}"value =" #{row.operationIdentifiedBy} "readOnly ="true"id ="it10"/ >"
  < af:inputText label = "#{bundle." SUBMITTED_BY}"value =" #{row.operationSubmittedBy} "readOnly ="true"id ="it11"/ >"
  < / af:panelFormLayout >
  < af:panelFormLayout lines = "2" id = "pfl10" >
  < af:panelLabelAndMessage label = "#{bundle." LAST_STATUS_CHANGE_TIME}"id ="plam7">
  < af:outputText value = "#{pageFlowScope.discrepancyView.lastStatusChangeTime}" id = "it12" / > "
  < / af:panelLabelAndMessage >
  < af:panelLabelAndMessage label = "#{bundle." SUBMITTED_TIME}"id ="plam8">
  < af:outputText value = "#{pageFlowScope.discrepancyView.submitTime}" id = "ot41" / > "
  < / af:panelLabelAndMessage >
  < / af:panelFormLayout >
  < af:spacer width = "30" id = "s9" / >
  < af:panelFormLayout lines = '6' labelWidth = "75" id = "pfl11" >
  < af:inputText label = "#{bundle." ERROR_REASON}"value =" #{row.reasonForFailure} "readOnly ="true"id ="it14"/ >"
  < / af:panelFormLayout >
  < / af:panelGroupLayout >
  < af:panelGroupLayout layout = "horizontal" inlineStyle = "margin-left: 68px;" width: 48%; "halign ="left"valign ="top"id ="pgl9">
  < af:panelFormLayout lines = '1' id = 'pfl12' >
  "< af:image source="/icons/messages_status.png "id ="i4"/ >
  < / af:panelFormLayout >
  < af:panelFormLayout lines = '1' fieldWidth = "480" id = "pfl13" >
  < af:inputText label = "#{bundle." NOTES}"lines = '4' columns ="120"value =" #{row.notes} ' readOnly = 'true' wrap 'soft' = id = "it15" / > "
  < / af:panelFormLayout >
  < / af:panelGroupLayout >
  < / af:panelGroupLayout >
  * < / f: facet > *.
  < af:column sortProperty = "parentResultGroup.name"
  sortable = "true" headerText = "#{bundle." SCANRESULT_NAME}"id ="c27 ".
  align = "left" width = "85" >
  < af:outputText
  value = "#{row.parentResultGroup.Name} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" »
  ID = "ot25" / >
  < / af:column >
  < af:column sortProperty = "parentResultGroup.type"
  sortable = "true" align = "left" headerText = "#{bundle." SCANRESULT_TYPE}.
  ID = "c28" width = "78" >
  < af:outputText
  value = "#{row.parentResultGroup.type} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" »
  ID = "ot26" / >
  < / af:column >
  < af:column sortProperty = "entityName" sortable = "true".
  align = "left".
  
  inlineStyle = "#{pageFlowScope.discTblSelListener.tableInLineStyle};" »
  headerText = "#{bundle." NOM_ENTITE}.
  ID = "c25" width = "85" >
  < af:outputText value = "#{row.entityName} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot23"/ >
  < / af:column >
  < af:column sortProperty = "externalEntityType."
  sortable = "true" align = "left".
  
  inlineStyle = "#{pageFlowScope.discTblSelListener.tableInLineStyle};" »
  headerText = "#{bundle." ENTITY_TYPE}.
  ID = "c26" width = "80" >
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.externalEntityTypeLabel} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot24"/ >
  < / af:column >
  < af:column
  sortProperty = "attributeOrRelationshipName" align = "left" sortable = "true".
  inlineStyle = "" text-align: left; ""
  Width = "140".
  headerText = "#{bundle." ENTITY_ATTRIBUTE_RELATIONSHIP}"id ="c22">
  < af:outputText
  value = "#{row.attributeOrRelationshipName} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" »
  ID = "ot20" / >
  < / af:column >
  < af:column sortProperty = "networkValue."
  sortable = "false" align = "left" headerText = "#{bundle.NETWORK_VALUE}" id = "c23" "
  Width = "140" >
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.discoveryValueAndEntityLabel} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot21"/ >
  < / af:column >
  < af:column = "inventoryValue" sortProperty
  sortable = "false" align = "left" headerText = "#{bundle." INVENTORY_VALUE}.
  ID = 'c24 '.
  inlineStyle = "" text-align: left; "width ="140">"
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.inventoryValueAndEntityLabel} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot22"/ >
  < / af:column >
  < af:column sortProperty = "custom".
  headerText = "#{bundle." CUSTOM}"id ="c999"width ="85"sortable ="true">
  < af:outputText value = "#{row.custom} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" »
  ID = "ot888" / >
  < / af:column >
  < af:column sortProperty = 'type' sortable = "true".
  align = "left" headerText = "#{bundle." DISCREPANCY_TYPE}"id ="c21 ".
  inlineStyle = "" text-align: left; "width ="65">"
  < af:panelGroupLayout id = "pgl17" layout = "horizontal" >
  < af:image
  source = "#{pageFlowScope.discrepancyView.discrTypeIcon [Row.type.valueAsString]}" "
  ID = "i7" / >
  < af:spacer width = "3" height = "10" id = "s13" / >
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.discrType} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot19"/ >
  < / af:panelGroupLayout >
  < / af:column >
  < af:column sortProperty = "gravity" sortable = "true".
  headerText = "#{bundle." DISCREPANCY_SEVERITY}.
  
  inlineStyle = "#{pageFlowScope.discrepancyView.severityColor};" »
  align = "left" id = "c15" width = "60" >
  < af:panelGroupLayout layout = "horizontal" id = "pgl10" >
  < af:image
  shortDesc source = "#{pageFlowScope.discrepancyView.discrSeverityIcon}" ="" "
  ID = "i5" / >
  < af:spacer width = "3" height = "5" id = "s12k" / >
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.discrSeverity} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot14"/ >
  < / af:panelGroupLayout >
  < / af:column >
  < af:column sortProperty = "prioritΘ" sortable = "true".
  align = "left" headerText = "#{bundle." PRIORITY}"id ="c19 ".
  inlineStyle = "" text-align: left; "width ="60">"
  < af:outputText value = "#{row.priority} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot18"/ >
  < / af:column >
  < af:column sortProperty = 'operation' sortable = "true".
  align = "left" headerText = "#{bundle." DISCREPANCY_RESOLUTION}"id ="17 ".
  inlineStyle = "" text-align: left; "width ="100">"
  < af:panelGroupLayout id = "pgl18".
  layout = "horizontal" clientComponent = "true" >
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.discrOperation} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" »
  ID = "ot16" > < / af:outputText >
  < name af:clientAttribute = "correctedBy".
  value = "#{row.operationIdentifiedBy}" / >
  < name af:clientAttribute = 'folder '.
  value = "#{row.operationSubmittedBy}" / >
  < name af:clientAttribute = "submiTimeString".
  value="#{pageFlowScope.discrepancyView.submitTime}"/ >
  "" < af:showPopupBehavior popupId = ": resolutionPUP".
  triggerType = 'sender' align = "beforeStart" alignId = "pgl18" / >
  < / af:panelGroupLayout >
  < / af:column >
  < af:column sortProperty = 'status' sortable = "true".
  align = "left" headerText = "#{bundle." DISCREPANCY_STATUS}"id ="c16 ".
  inlineStyle = "" text-align: left; ""
  Width = "140" clientComponent = "true" >
  < af:panelGroupLayout id = "pgl16" layout = "horizontal" >
  < af:image
  source = "#{pageFlowScope.discrepancyView.discrStatusIcon [Row.Status.valueAsString]}" "
  ID = "i6" / >
  < af:spacer width = "3" height = "10" id = "s12" / >
  < af:outputText
  value = "#{pageFlowScope.discrepancyView.discrStatus} '"
  
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot15"/ >
  < name af:clientAttribute = "lastStatusChangeTimeString".
  
  value="#{pageFlowScope.discrepancyView.lastStatusChangeTime}"/ >
  < name af:clientAttribute = "reasonForFailure".
  value = "#{row.reasonForFailure}" / >
  < name af:clientAttribute = 'notes '.
  value = "#{row.notes}" / >
  "" < af:showPopupBehavior popupId = ": statusPUP".
  triggerType = 'sender' align = "beforeStart" alignId = "pgl16" / >
  < / af:panelGroupLayout >
  < / af:column >
  < af:column sortProperty = "discrepancyOwner."
  sortable = "true" headerText = "#{bundle." OWNER}"id ="18"align ="left ".
  Width = "60" >
  < af:outputText value = "#{row.discrepancyOwner} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot17"/ >
  < / af:column >
  <! - source columns not too helpful, so emotional at the end (Kenny) - >
  < af:column sortProperty = "discoverySource."
  sortable = "false" align = "left" headerText = "#{bundle." DISCOVERY_SOURCE}.
  ID = "c2311" width = "60" >
  < af:outputText value = "#{row.discoverySource} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" »
  ID = "ot2111" / >
  < / af:column >
  < af:column sortProperty = "importSource.
  sortable = "false" headerText = "#{bundle." INVENTORY_SOURCE}"id ="c2411.
  Width = "60" >
  < af:outputText value = "#{row.importSource} '"
  inlineStyle = "#{pageFlowScope.discrepancyView.inLineStyle};" "id ="ot2211"/ >
  < / af:column >
  < / af:table >

  Hello

  This is a known behavior managed in bug 9830307 and 9768470. This is the expected behavior for the rows in the table that can be selected. FF and Chrome may behave differently, which is considered to be the wrongful conduct and is subject to the determination

  Frank

• HELP - strange behavior rounded Rectangle - cannot select Anchor Points

  Good day to you all, I hope someone can help out me.

  I have a strange problem with my Illustrator CS3.

  I worked on an illustration for hours without any problem and the graphics requires me to do a lot of "buttons". I used the rectangular shape with AESTHETIC tool > > button CORNERS ROUNDED to create different forms without any problem whatsoever.

  All of a sudden (without close AICS3), all my NEWLY CREATED rectangles behave strangely.

  None of my new rectangles allowed me to individually select anchor points. As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  When I choose the direct Selection (white arrow) tool, I can not select on the path itself and only the limit is displayed (with corner WHITE, no black points). Adjust this flat bounding box / distorts my rectangle, while the scales of adjustment with the black arrow rectangle. I can't use the scissors tool either. I can't add/remove is a path with the pen tool.

  I can't select individual anchor points.

  All of the 'old' generated rectangles are fine, I can select each path and anchor individually, but all rectangles later do not allow me to do.

  To add to the confusion, this only happens with rectangles. As you can see with the picture below. I can create any simple or complex form/paths, and I can choose individual anchors with no problems. Can I use the tool scissors without any problem or even the tool pen to add/remove a path to all other forms BUT the rectangle with corners rounded...

  

  Only the rounded rectangle tool shows the anchor 'blue '. Note that all four forms have been selected with the direct Selection (white arrow) tool. If I used the black arrow, then the selection should have been outside of the black lines of the rounded rectangle.

  What is going on? I deleted the AIPrefs, it isn't CTRL-H, I am really confused...

  Help, please. Thank you very much

  Dave

  As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  Yes, as it should be. Rounded corners is an effect and unrelated to the native rounded rectangle tool. In order for the paths, the effect should be expanded using the object--> Expand.

  Mylenium

• [CS4] AIPathSuite::SetPathSegments() selects all points

  Hello

  I am desparetly trying to adapt my plugin for AI CS4. It works fine under CS3 & older. But the same code recompiled under CS4 SDK, don't nastly changes in the selection of points in the path. Indeed, the call AIPathSuite::SetPathSegments() does NOT maintain the existing selection state as he did in CS3 and higher, but still select all THE points on a path partially selected. It is an ABSOLUTE NECESSITY for my plug-in to maintain the existing State of selection for partially selected paths. I tried unsuccessfully to means that I could imagine to turn around this bug, including the record of the selection state before changing the coordinates of the points and after restore. Similarly for the path art attr... Apparently, this is beyond the control of the plus-po HAVE seems to change the selection after my trips plus-dans routines.

  FWIW, my plugin does not use LiveEffet because it makes no sense for the plug-in. I develop on Mac OS X, but I guess that it would give the same results under Windows.

  Need help please, I am deperate.

  Too many customers are angry because I can't provide an update for CS4

  TIA

  I guess that's a filter? In my view, selects automatically that nothing touched when a filter is running. I thought he did always frankly.

  If you need to maintain the selection, I would try to add a step to your strategy of 'save & restore '. Illustrator will beat you selection, you can't win this fight. So just let it go and THEN restore your previous selection. I believe you can get that the use of a timer. Create a timer with a length of zero and I think it fires after that Illustrator is over. You can create and market when you have finished your filter, then turn it off as soon as you catch it, actually making it a one-shot timer. When you catch the timer, you restore you selection at this time here and I hope that you have bypassed the Illustrator trying to 'help' you. Why this is not an option on the filter that I'll never know.

  I used this technique before to solve simillar problems, so I think it will help here. In any case, good luck

• I'm trying implement highlight/select all mails from a particular sender to remove

  My Inbox needs serious editing. A lot of unwanted emails. I would like to delete e-mails in groups, but do not know how to select or highlight an entire group, which can then be removed.

  You can click on any column heading to sort by that column. Clicking the same header again reverses the sort.
  Then you use basic computer skills to select multiple items
  Click the point 1. Up or down several elements and hold down the SHIFT key when you click on the point 2. This allows to select the elements 1 and 2 and everything in between.
  Holding down the CTRL key and clicking on random element will select all clicked on element.
  Select an item. Press Ctrl + a to select.
  Hold down the CTRL key when you click on a selected item to deselect the item.

• How adjust the tint or color of a highlighted selection inactive in Windows 7?

  I'm looking on how to adjust the color and the shadow of a selection inactive in Windows 7.

  Try to understand what I'm after:

  Explorer of files open in a window that is not maximized not so you can still see part of your office.
  Left click on any file in the file Explorer.
  Now, click your desktop.
  Notice how the highlight color takes a dim gray on the selected file.  It's the shade/color I want to change.

  The reason why I need is when you use a program for a reference and another for a task that count you seeing the information highlighted in the other program.  It becomes very difficult to see sometimes depending on your level of the eye in relation to the item highlighted.  (With the help of a LCD).  Also within the same program like SolidWorks for example if you select an item in the graphics view highlights in the PDM tree, but as the tree does not focus it is a very light gray and is difficult to see.

  I found a fix supposed to Windows XP but don't know where to look in Windows 7 to fix this if possible.  Here's the patch supposed to XP I don't know with certainty that it works although I have not tried.

  Control Panel, display, appearance, Advanced Options
  Select "3d elements".
  change to a darker gray
  accept - apply
  voila!

  So I don't know if there is an adjustment of the elements, I do somewhere in 3d?  May be in the registry?

  And please do not suggest the themes of contrast high or similar.  I've been there.  I'm looking for something more elegant keeps the default look of Windows 7.

  Help, please.  That would make my work from day to day less irritating.
  Thank you

  Stott,

  Even if this is normal breast of Windows, there may be third party software that can take care of it the way you want. I would do some research on your favorite search engine.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get the selected tree node and its attributes

  I have a 'af:RichTree' on a page, which is linked to a support bean (session scope)
  
  Here is my selection Listener:
  
  {} public void groupTreeSelectionListener (SelectionEvent selectionEvent)
  RichTree tree = (RichTree) selectionEvent.getSource ();
  Model TreeModel (TreeModel) = tree.getValue (); / /--> this line causes a "pointer Exception zero."
  RowKeySet rowKeySet = selectionEvent.getAddedSet ();
  Key of the object = rowKeySet.iterator () .next ();
  }
  
  
  
  
  what I'll do is get the note selected and then get all the attributes of this node, perform other actions.
  
  
  Please advise,
  
  Thank you
  Shahab

  have not tried the tree component but cross chek well's Rowselection component of the tree. If so set to single or multiple

• Highlight / selected MenuItem

  Hello

  When the user pressed a MenuItem, is it possible to highlight the selected item when the user click the menu of the phone again? Y at - there any sample code I can read on this?

  Thank you in advance.

  Kind regards

  Joshua.

  You can do if you change the order of Menu after clicking on Menu2 get this order:

  Menu2
  Menu1
  Menu3

  because the first item in the menu will be selected by default

• How can I link to pages in a selection tree / index level 2 with java script popup?

  I can do something unique popup level using the java script below (#1) and selections link to pages but to change a tree of selection index popup level 2 as below (#2), I can't seem to understand how to link to the pages. Any help much appreciated. Thank you

  1

  var itemIndex = app.popUpMenu("INTRODUCTION", "ALPHABET", "GRAMMAR", "NUMBERS", "DATES & TIME", "GETTING TO KNOW PEOPLE", "PHRASES FOR LEARNING", "DIRECTIONS & TRANSPORTATION", "DESCRIBING THE TRAIL", "DO'S & DON'TS", "EQUIPMENT", "FOOD", "INTRODUCING A VILLAGE", "CULTURE AND ETHNIC GROUPS", "HANDICRAFTS", "TEMPLES & MONKS", "AGRICULTURE", "ANIMAL HUSBANDRY", "SCHOOL & EDUCATION", "LEADING A TREK", "NATIONAL PROTECTED AREAS", "IDENTIFYING WILDLIFE", "PLANTS & FORESTS", "BOATS", "CAVES ", "HEALTH AND SAFETY"() "

  switch (itemIndex) {

  case 'INTRODUCTION' :

  this.pageNum = 1

  breaking

  case "ALPHABET" :

  this.pageNum = 2

  breaking

  case 'GRAMMAR' :

  this.pageNum = 5

  breaking

  case "NUMBERS" :

  this.pageNum = 30

  breaking

  case 'DATE & TIME' :

  this.pageNum = 35

  breaking

  case "GET to KNOW the PEOPLE" :

  this.pageNum = 42

  breaking

  case "PHRASES FOR LEARNING" :

  this.pageNum = 56

  breaking

  case 'DIRECTIONS & TRANSPORT' :

  this.pageNum = 59

  breaking

  case "DESCRIBING THE TRAIL" :

  this.pageNum = 63

  breaking

  case 'Things to do and not to do' :

  this.pageNum = 68

  breaking

  case "EQUIPMENT" :

  this.pageNum = 74

  breaking

  case 'FOOD' :

  this.pageNum = 83

  breaking

  case "INTRODUCE a VILLAGE" :

  this.pageNum = 96

  breaking

  case 'CULTURE AND ETHNIC GROUPS' :

  this.pageNum = 105

  breaking

  case "CRAFTS" :

  this.pageNum = 120

  breaking

  case "The TEMPLES and the MONKS" :

  this.pageNum = 126

  breaking

  case 'AGRICULTURE' :

  this.pageNum = 131

  breaking

  case "FARMING" :

  this.pageNum = 140

  breaking

  case "SCHOOL & EDUCATION" :

  this.pageNum = 145

  breaking

  case "LEADING a TREK" :

  this.pageNum = 151

  breaking

  case 'NATIONAL PROTECTED AREAS' :

  this.pageNum = 155

  breaking

  case "IDENTIFICATION of WILDLIFE" :

  this.pageNum = 161

  breaking

  case "PLANTS & FOREST" :

  this.pageNum = 169

  breaking

  case 'BOATS' :

  this.pageNum = 175

  breaking

  case "CELLARS" :

  this.pageNum = 178

  breaking

  case 'HEALTH AND SAFETY' :

  this.pageNum = 182

  breaking

  }

  2

  var aINTRODUCTION = ['INTRODUCTION', 'How to use this book', 'Format'];

  var aALPHABET is ["ALPHABET", 'Vowels', 'Sounds consonants'];.

  var itemIndex = app.popUpMenu (aINTRODUCTION aALPHABET);

  
  

  Thank you.
  

  
  

  It works exactly the same... itemIndex will bear the name of the selected

  order of the day.

• How to select several points of movement Tracker?

  I have a trajectory of Tracker with a lot of points. I can slide individually, and I can Shift + click to select more than one. But is there an easy way to select all the points in a given region? Or, best of all, all the points that follow a given time?

  I'm trying to drag all the points that follow a discontinuity in the path, to the difficulty of the discontinuity.

  Don't know what you're trying to do here. These 'points' are just keyframes and can be mass selected in the timeline panel and then you can change the values it by rubbing the digital displays. This will adjust them compared to the base value. If you need anything else, then you must adjust them one at a time, although you can find tools like KeyTweak and others found on AEScripts useful...

  Mylenium