Highlighted on the sequence area

Similar Questions

• Measure highlights in the image

  Hello world.

  I was presented with a challenge.

  Our team of mechanics built a machine that randomnly erodes the surface of a test tube.

  It is an image of a specimen captured at the beginning of a test:

  

  As you can see four white lines are present in the image, the lines are caused by the reflections of the lamps.

  And this is a picture of a similar specimen at the end of a test.

  

  We already found a satisfactory means to measure areas of erosion and it seems to be robust for all colors of possible test specimen

  Now they decided they wanted the machine to measure the length of the white reflection lines (online), because the erosion to some materials only causes the surface to become tangled.

  And not necessarily give obscurity eroded area above.

  an example of such a case of use can be seen below:
  

  I tried several approaches without success.
  Ideally I would like to isolate the highlighted lines, so that the system could identify almost the same lines as those which is hand painted below

  

  Tried methods:

  1)
  IMAQ find Edge, to get the endless lines that best described the lines of reflection highlighted.
  Then using an binning method, the line is segmented, in the place where there is enough light in the picture.
  This method is, however, very sensitive to the horizontal change in lighting and usually either find endpoints, or frosted and middle section correctly.

  2)
  Tuning IMAQ detect lines
  It gives me:
  

  Which is exactly what I want, as I hoped that the lines on the left of the eroded area would also include, and lines lie above and below the highlights would have been excluded, but getting close.

  3)
  High pass filter of the image to improve the edges and remove the effects of the quality of variable light.
  The built-in methods had tend to reinforce the edge of erosion more or equal to the highlights, so I tried to build my own kernel to improve only the horizontal characteristics, but even with a core of 5 x 5 was the best result I got:
  

  Who has not exactly me left to separate the highlights of the eroded area.

  4)
  Finally, I tried a cross-correlation with an image of a horizontal line with a small width.
  

  Yet once I improved more than eroded area the line feature I was interested.

  If you have an idea, that I can use to either improve the highlighted lines, so that the length can be measured I would really appreciate it.
  I tried to adjust gamma, contrast and brightness to make the 'white' lines stand out, but due to the change in light, this also gives the bright Center of the image until the lines are increased in the extremities.

  Thank you

  / ZcuBa

  You can very easily find everything at the top and the bottom line using advanced search of edge. It extracts the values of the pixels form the profile of the line and you should be able to detect all non-uniform pixel values.

  There is a screenshot of the result.

  Good luck

  Dan

• How can I change the resolution of the sequence?

  Let me explain my situation:

  I created a sequence accidentally to 480 p and then edited my full video in this sequence. All of the clips used in the sequence were 1080 p, but when I try to change the resolution of the sequence, you can say that it does nothing. I also tried to create a new sequence and copy and paste all my stuff in it from the original sequence. It doesn't change anything. The sequence says that it's in 1080 p, and the videos say they are 1080 p, but they are clearly not. There are two giant black bars at the top and bottom of the screen preview and export, there are four giant black bars - one on each side of the video. It's like the videos and the sequence are correct, but there are some that deferred setting that enlarges the clip down to the old sequence or something... Please help!

  I think that the problem is that your sequence settings are 1920 x 1080 @ Pixel Aspect Ratio of 0.9091. For video 1920 x 1080, IRON is typically square (1.0)

• gaps in the sequences being cached

  Would like to know if the sequences are defined the cache is it possible to see gaps in the sequence if a process such as rman or a long period of time accures.
  
  I'm trying to identify why we have gaps. I read a little, if the system boils then the sequence in the cache would be lost and Oracle would get the next set of numbers.
  
  10.2.0.4
  Linux
  
  Thank you
  Steve

  user12551219 wrote:

  Would like to know if the sequences are defined the cache is it possible to see gaps in the sequence if a process such as rman or a long period of time accures.

  I'm trying to identify why we have gaps. I have

  Oracle sequences will always be gaps for various reasons, a restoration is one, caching and data base closures are others. Caching of the sequences produced better performance.

  The answer is to not care that there are gaps in sequence.

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:4343369880986

  A sequence is a unique identifier and not a counter, store a number of rows in a table is non-relational and not to carry out or scaling. If the lines are to be counted, they should be counted when they are selected.

  If you are concerned about the number of losing because you can escape, I worry for some time or the other.

  Re: What kind of operation on the inside?

• Generation of the sequence.

  I noticed that the sequence is generated on all cases when we use it in a select statement.
  
  For example I have a DECODE in the select statement and I use two sequences one if the statement is TRUE and the other when his SCYTHE. But the sequence are generated on both the two. I know this behavior but I just want to know why it happens like that.
  
  Here is a small example.
  

  SQL> create table t
    2  as
    3  select level no
    4    from dual
    5  connect by level <= 10
    6  /
  
  Table created.
  
  SQL> create sequence s1
    2  /
  
  Sequence created.
  
  SQL> create sequence s2
    2  /
  
  Sequence created.
  
  SQL> select no, decode(mod(no,2),0,'even-'||to_char(s1.nextval),'odd -'||to_char(s2.nextval)) seqval
    2    from t
    3  /
  
          NO SEQVAL
  ---------- ---------------------------------------------
           1 odd -1
           2 even-2
           3 odd -3
           4 even-4
           5 odd -5
           6 even-6
           7 odd -7
           8 even-8
           9 odd -9
          10 even-10
  
  10 rows selected.
  
  SQL> select s1.currval from dual
    2  /
  
     CURRVAL
  ----------
          10
  
  SQL> select s2.currval from dual
    2  /
  
     CURRVAL
  ----------
          10

  Thank you
  Knani.

  A sequence is prety different, it is not a function.
  For a given sequence, Oracle only launch a sequence to each row value.

  Please, ask in this thread:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:8491662046178

  Nicolas.

• How can I sequence photos in an album of Pad?  Pictures are sequenced by file name (for example, 10 C, 20 C, CN) within their folder (album) in Photoshop Elements on my PC to 10 Windows, but the sequence is disrupted on the iPad via iTunes import/synchron

  How can I, sequence, photos, in, one, pavement, album?, the, photos, are, sequenced, file, nam e, (e.g., AC, 10, AC, 20,...) (CNN), within, their, folder, (album), in, Photoshop, elements, on, my, Windows, PC 10, but sequencing, is, disturbed, to, import, /, synchronization, to, t it, Pad, via air, how, may, sequencing, PC, be maintained, soon, transfer, to, nth, Pad?  My PC operating system is Windows 10 and my iPad is version 9.2.1.  Photoshop Elements is version 10.

  There is no way to manually sequence on an iOS device.  You can import them to your computer and the sequence by using a photo application that has this feature.

  iOS: import personal pictures and videos of iOS devices to your computer

• Faced with a failure of OSD task sequence. The failure messages in the end are: failure to file WIM mount (0 x 80070002) & Failed to create media (0 x 80070002)

  Hello

  Faced with a failure of OSD task sequence.

  The failure messages in the end are:

  --------------------------------------------------

  Has no file WIM mount 0 x 80070002

  Cannot create media 0 x 80070002

  CreatTSMedia failed with error 0 x 80070002 details MediaGenerator

  --------------------------------------------------------------------------------------------

  It comes via SCCM 2007 R3 and a version of Windows XP.

  I think 0 x 80070002 means "the system cannot find the file specified."

  But what file?

  How do you determine what the media Wizard is missing to generate this error?

  Is this a driver problem?

  Thank you

  John

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/configmgrosd/threads

  Hope this information helps.

• on my desktop, the icon, (text under the icon) are highlighted, is anyway to have just the text under the icon? Thank you

  on my desktop, the icon, (text under the icon) are highlighted, is anyway to have just the text under the icon? Thank you

  This is probably caused by your background color of your screen.  You can confirm this by:

  If you have a Web page on your screen, then you will need set the color manually by:

  (1) right click on your desktop and select "Properties".
  (2) this should bring up your "Display properties" dialog box  (You can also get it by going to your control panel and double-clicking on 'Display'.)
  3) click on the tab "Office".
  (4) on the bottom right of the dialog box, there is a 'Color' option and below which shows the colors of the office - this must match what you see on the screen.
  (5) simply change the color to whatever color you want and then click on the 'OK' button to close the "display properties".

  If you do not have any web content on your desktop, you can set the transparent icon labels by:

  (1) right-click on 'My Computer' then click 'properties '.
  2) click on the "Advanced" tab
  (3) in the 'Performance' section, click on the button "settings".
  (4) make sure that "shadows fall to use the desktop icon labels" is checked
  5) click on the 'OK' button to get out of the "Performance Options".
  "6) click on the 'OK' button to get out of" System Properties "
  (7) right click on desktop
  (8) mouse on "arrange icons by".
  (9) be sure that "Lock Web items on desktop" is unchecked.  (If it is, just click once.)

• When I drag files in WMP the sequence of songs is not because it is in the list of files. the first certain tracks are at the bottom of the playlist

  When I drag music files in WMP and in the field of reading list, the sequence of songs is not as it should be determined in accordance with the list of files in Explorer windows, the first or the first few tracks are at the bottom of the playlis.
  For example when I drag the track 1 to 10 in WMP playlist could end up with the 4,5,6,7,8,9,10,1,2,3 sequence. It ranges from which follow playlist starts with, but the first track (s) (rare) is at the bottom every time.

  PS. Shuffle is not lit.

  Is not necessarily any indication of a fault as WMP does this, even when it is running correctly [he apparently gets files loaded in the order that they appear in the allocation table disk files].

  You can

  1 after dragging in the playlist, drag files to the top or to the bottom of the playlist in the desired order before you save the playlist.

  2 Allocate Index properties for each track before slipping as WMP then normally behave correctly when you drag them.

  3 you can also drag the in WMP individually to achieve the same end result.

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ

• I can't import a sequence of photos on pro first because all the pictures are greyed out.

  I can't import a sequence of photos on pro first because all the pictures are greyed out. I can't click on one of the pictures either. The image sequence is also grayed out. The image files are in CR2 and there are approximately 300 pictures. I had this problem only with the creation of time-is invalid. Help, please... Concerning

  Cr2 are not supported by first.

  Try png or psd or tiff, and they must be in RGB.

• Finding and fixing of the sequences that are out of sync

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production version

  Hello

  Recently, our development database has been updated with production data, but have not been copied from the sequence.

  Then of course the sequence numbers are very badly synchronized with the primary key for tables throwing errors in primary key.

  How can I find the sequence names, names of tables, columns in primary key, and max values for the primary key columns that have values of key primary school max who are higher than the nextval of their corresponding sequences?

  So far the nextval of sequence numbers were all less than the max value for the primary key for the corresponding tables.

  We used the method:

  SELECT max (primary key column)

  TABLE;

  SELECT sequence_name.nextval FROM dual;

  Sequence_name ALTER SEQUENCE increment primary key value - current value of sequence max + 1;

  SELECT sequence_name.nextval FROM dual;

  SEQUENCE Sequence_name CHANGE INCREMENT OF 1;

  But this is done when a record is inserted into a table and the error is thrown.

  So I hope there is a much better way to remedy.

  Please leave me a question.

  Thank you

  Joe

  I don't know if this will help you or not, but here is what I used for the synchronization to the top of my sequences during the last upgrade/server database migration, I was involved with. You must be logged under the scheme that sequences need synchronization, linking of data back to the database, you are basing the sequences on and then let go and recreate sequences. It essentially creates a couple of other scripts and then executes them.

  CREATE DATABASE LINK dblink
  CONNECT to & schema
  IDENTIFIED BY "& password»
  USING ' & dbname';

  set pages 0;
  left head;
  Set feedback off;
  Set trimspool
  fixed line 1000;

  coil gen_seq_grants_spoolfile.sql

  Select 'grants'. privilege: ' on ' | table_name |' to ' | dealer | « ; »
  to user_sequences us,
  USER_TAB_PRIVS PAO
  where us.sequence_name = dtp.table_name;

  spool off;

  coil gen_seq_spoolfile.sql

  Select 'remove the sequence'. o.object_name | ';' | Chr (10) | Chr (10) |
  ' create the sequence ' | o.object_name | Chr (10) |
  "Start by ' | '. (to_number (s.last_number) + s.increment_by) | Chr (10) |
  "maxvalue ' | s.MAX_VALUE | Chr (10) |
  "minvalue ' | s.MIN_VALUE | Chr (10) |
  "nocycle | Chr (10) |
  'cache'. largest (s.cache_size, 20). Chr (10) |
  "all." Chr (10)
  of dba_objects@dblink o,.
  s dba_sequences@dblink,
  USER_SEQUENCES us
  where o.owner = user
  and o.object_name = s.sequence_name
  and o.owner = s.sequence_owner
  and s.sequence_name = us.sequence_name
  and o.object_type = 'SEQUENCE '.
  and us.last_number< s.last_number="" +="">
  order of o.object_name;

  spool off;

  Set of feedback

  @gen_seq_spoolfile.sql
  @gen_seq_grants_spoolfile.sql

  Drop database link dblink;

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo

  

• A way to show items that are not used in the sequence

  Hello world

  is there a way to display items that are not used in the sequence.

  in order not to forget the "rushes" in the Assembly?

  my best,

  Turn on the use Audio and video columns in the sandbox and then sort by those.

• Sequencing to render the 'working area' as a process batch in the SOUL

  I use the latest version of creative cloud (20141)

  I need to restore large amounts of footage of the first both in the SOUL and I need to display the work only area. How can I change this setting on several sequences at the same time to avoid doing one by one.

  Thanks, Moja.

  I have to make the 750 videos this month and don't want to go through each sequence and configure it to display the work area. In the latest version of SOUL, make work was default zone. Let me know how can I set this up as a batch process so I don't have to spend all day clicking on through one by one.

  Thanks, Moja.