Unable to print business cards P1102w of Word 2007 / Windows 7

Similar Questions

• I am trying to print business cards

  I just bought a HP Photosmart C4480 all-in-One. I tried to print business cards using the type of stock perforated (equivalent to Avery L7414).

  I can't match the top margin so that printing starts within the perforated area. If I use plain paper that it lines up properly. When I use the cardstock I get different higher margins even if I do not change the setting. It's like as if the map is slippery in the printer after it gets taken up by the rollers and prior to printing. Advice please on what to try a solution?

  Always looks like a mechanical problem, however changing software shouldn't solve the problem if this was true. In any case, I'm glad that you were able to find something that works. My last word of the Advisor; stick with what works.

• When I print business cards, they print sometimes 1/4 too high, but not always.

  I have my business cards in a Word document by using a template Avery. I used the same file for years. I never had a problem with my Canon printer, but after buying an HP Photosmart D110, I got nothing else problems. When I print, then they print approximately 1/4 in. too high ruin cardstock and waste. This happens not all the time. Sometimes I print and they are perfect but when I come back and print another, the problem returns. It is the same strain of the map that I have used for years and when it is inserted in the printer it doesn't matter if it's a single page or a stack of them. I tried the page preview before printing and the alignment is correct. I tried to print to PDF and then print the PDF, same problem. I try on the barrel and no problem. Only reason why I bought it was in the first place the cartridges were cheaper and I do a lot of color printing and scanning.  I just replaced the cartridges and did a head alignment is not the problem. I tried it with plain paper and the problem persists. I'm ready to give up anything to join your room and buy another Canon!

  AuntieEm, thank you very much! It worked flawlessly! Hugs xoxoxo

• LaserJer Pro 200 M351nw: residues of toner to print business cards

  When I print on bond paper, I get a decent, crisp image. But when I print on card stock thre is a powdery residue on the paper. I can drag it with a handkerchief and get a significant amount of powder on the tissue.

  I remember reference to paper stock that is sutiable for color lasers, but I can't find it all in stock business cards anywhere I looked. It is apparently a special paper.

  I went through the type of paper in the printer properties. The only problem is when I print business cards. Is currently trying Avery 5876 and 8876 and Office Depot 3700-R. The 5867 and 3700-R are labeled for use in color lasers. The 8876 is inkjet. Same negative results with all.

  All proposals/solutions would be greatly appreciated.

  Hi @1071 ,

  I see by your post only when printing on cards, you get powdery residue on the paper.
  I want to help you solve this problem.

  You have the Laserjet LaserJet Pro 200 M251nw?  How can I find my model number or product number?

  Usually, when there are residues, burrs, tasks of toner left on the pages is caused by the paper used or the type of paper selected in the printer driver. You already tried different types of paper and had the same results.

  The Avery 5876 you tried are Laser printers.

  It is recommended to use bright white paper or paper that is designed for use in Laser printers.
  Don't use paper that is designed only for use with ink jet printers.
  Progress of paper is porous and for printers inkjet that absorbs ink in the paper.
  Paper Premium isn't for Laserjet printers. Chemicals and the ink soaks into the paper and takes more time to dry.
  Use paper that is not too rough. Generally using smooth paper translates into a better print quality.

  I have provided the specifications of paper for this model.

  Specifications for HP LaserJet Pro 200 M251n and M251nw color printer.

  Up to 200 g/m2 (110 lb. index) cards

  I have a document with a few steps to try to see if this will solve the problem.

  Troubleshooting print quality problems.

  What is the weight of the cardboard?

  What parameter for the type of paper do you use?

  If you need help, let me know.

  Have a great day!
  Thank you.

• What kind of paper setting should I set my printer to print business cards?

  HP PSC 2210 all-in-one

  Win XP Pro Media 3rd ed.

  No error message

  No changes made to the system

  I am trying to print business cards using Avery 2 faces of business cards printable 5876.

  When I print a test out of my biz on plain paper # 20 cards and adjust the settings so, everything goes well and a walk test using the regular stock # 20 everything comes out great!  But when I put in the stock cards Avery and hit go, the printer goes much more slowly while the scenario and images very dark with excess of toner on the card only stock.  But not on the paper stock. Why is this?

  Should I should change the settings for the automatic printer paper what setting for business cards?  If so, in what context? -Special papers, greeting cards, paper brochure or what?  PLEASE NOTIFY.

  Thank you

  Scott

  Hmm...  I just did a search on the card stock you use, it is designed for laser printing, do not ink jet.  That being the case, I suggest to try the thick paper or plain paper for the paper type.  The product of 8877 Avery may be a better choice for your inkjet printer.

• print walks onto the page when printing business cards

  When I print multiple sheets of business cards printing the page begins to wander to the top of the sheet.  If I only print one page at a time, this isn't a problem.  How can I fix?   I have an Officejet Pro e8100 printer works wirelessly on a Win 7 64 bit OS Home premium.

  RickT2,

  Welcome to the HP Forum.

  If the first page prints OK and then subsequent pages tend to stick or the text wanders a bit, then perhaps adjust the media type would help.

  Assumption

  Setting the media type tells the rolls expected in what kind of paper - this could help pull the paper but at the right speed and tension to allow the text to apply to the location appropriate during each pass.

  Paper size and media Type are selected in the printing preferences:

  Control Panel > display icon > devices and printers > right click on your printer >

  Printing preferences > tab paper / quality >

  Select the paper Source > have desired / needed by printer model

  Select the paper size > have desired / necessary for the print job

  Select Support > have desired / necessary for the print job - for example: paper matte brochure for labels

  Ok

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• I can't print business cards

  I bought a HP Officejet Pro 8500 a and Print artist version 23. I use the software and design business cards, take the A4 (which is a product of Avery 8571) and then print. The end result is the printer prints about 1/4 inch on the brands of preferated to the left. The alignment is off and I ruined sheets of cards preferated. I use regular paper now just to see if I can solve the problem but after exhausting all possibilities including choosing A5 and the creation of business cards 2x3.50 on the software, the printer still refuses anything else print that off to the left.

  Any suggestions?

  I thought of her after hours of changing the settings in the Print artist program. The setting must be on the cards own Cup istead a4 as Avery said.

• How to print business cards in PSE9?

  I try to print my design on paper card stock business.  How do you print to Avery Cardstock or address labels Avery in PSE 9?

  Thanks in advance.

  iness-Card-_-Wide-8-per-sheet-_Adobe-Photoshop.htm http://www.Avery.com/Avery/en_US/templates-%26-software/templates/cards/business-cards/bus? N = 0 & refchannel = c042fd03ab30a110VgnVCM10 00002118140aRCRD

  There are several models available (for download) Avery that open in Photoshop and PS Elements. directly.

• To print several documents duplex in Word 2007 problem

  Hello.  I have a laptop Dell Inspiron 9400, running Vista business, SP1.  I can't print multiple copies of a two-sided document in Word 2007 on a HP LaserJet 2200DN, connected via a JetDirect card.  What I do is select the duplex function, select multiple copies (for example, 3 copies) and send to the printer.  The printer prints a copy correctly, then stops - no other flashing lights or whatever it is, it is done with the print job.  To work around this problem, select print, print a single copy, click ok, and then print this copy and repeat until I have the number of copies, I need.

  I installed the latest driver for the LaserJet printers without success.  In Firefox, I'm able to print double-sided copies, so my thought is that the problem may reside with Word.  I have searched this forum and Google a potential answer, but have not found anything yet.  Any help would be appreciated.  Thank you!

  -Alex

  Marilyn,
  I found another workaround.  I think I can be happy with this one and we have no need for this further.  In Word, when I want to print, I can select Properties.  Within this selection is a tab for the printing of the shortcuts.  If I select ' Eco-print (printing two) "in the list, it will be front back and print multiple copies.  The problem is the default setting in the list, "Factory Default".  Something in this selection stops the printer from allowing multiple copies when double-sided printing.

  I think that this will work for me and I don't need extra help.  Thanks for your help!

  -Alex

• HP Laserjet 1022N: unable to print from IE11 to, HP laserjet1022n HP Windows 10 machine

  I am able to print without any problem at all on my new HP computer applications, but with the exception of Internet Explorer 11.

  When I try to print my internet Laserjet1022n explore closes and we must open.

  Event ID 1000 and source of Application error.

  I uninstalled and reinstalled the printer (connected with a usb cable)

  I would be grateful all the other tips!

  Again, all applications other than IE11 print very well!

  The details are below:

  Log name: Application
  Source: Application error
  Date: 12/07/2015-21:02:03
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Computer DESK-8U0DERA
  Description:
  The failing application name: iexplore.exe, version: 11.0.10240.16412, time stamp: 0x55b99d3f
  The failed module name: ntdll.dll, version: 10.0.10240.16430, time stamp: 0x55c59f92
  Exception code: 0xc0000374
  Offset: 0x00000000000ea28c
  Process ID vulnerabilities: 0xaa0
  Start time of application vulnerabilities: 0x01d13131da821932
  The failing application path: C:\Program may Explorer\iexplore.exe
  The failed module path: C:\windows\SYSTEM32\ntdll.dll
  Report ID: b43ec6b3-585c-4e70-96e3-721a4de98d63
  Faulting full name of the package:
  ID of the failed package-parent application:
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      1961
      Application
      COMPUTER DESK-8U0DERA
     
   
   
      Iexplore.exe
      11.0.10240.16412
      55b99d3f
      ntdll.dll
      10.0.10240.16430
      55c59f92
      C0000374
      00000000000ea28c
      AA0
      01d13131da821932
      C:\Program may Explorer\iexplore.exe
      C:\windows\SYSTEM32\ntdll.dll
      b43ec6b3-585c-4e70-96e3-721a4de98d63
     
     
     
     
   
  

  Hi @phlump,

  Welcome to the Forums of HP Support!

  I see that you are unable to print from Internet Explorer 11 to your HP LaserJet 1022n printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you are able to print from other applications. While this question would be better suited for Microsoft, I can make some suggestions. If these solutions do not help, please contact Microsoft.

  Reset Internet Explorer settings (backup your Favorites):

  You can reset the Internet Explorer settings to return to the State they were when Internet Explorer has been installed on your PC. This can be useful to solve the problems that could be caused by some settings changed after installation. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

   

• HP P1102w: Unable to print on HP p1102w Mac (OS 10.12)

  I upgraded to Sierra (OS 10.12) and installed the HP for the P1102W driver (hp says its compatible with Mac OS 10.12) that I downloaded from hp website.   I then added the printer in the printers/Scanner menu on mac.

  The mac is to detect the printer OK (status in the menu of mac printer shows slowed down when the printer is turned on), but nothing comes out when a document is printed.    There is no error message (the mac believes that the job is printed successfully).

  Swapped the USB cable to rule out a defective cable.

  Pls help.

  Try resetting the system printting as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
  
  Click on the Apple menu and then click on System Preferences.
  Select Printers and scanners.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Then, click on the plus sign and select your printer from the drop-down use, remember to select the model of HP printer and click Add.

  Then, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Now try printing and search of any differemce.

  If remain the same, what application are you printing from? can see a difference when trying to another application such as TextEdit or Safari?

  Kind regards
  Shlomi

• Printer hp laserjet P1102W wireless light. Windows Vista operating system

  After trying to download the firmware update to enable air print from an I - pad 2, the wireless light is out and didn't once again.  I tried to reset the printer back to the original settings, but nothing happened.  We have a router from linksys E1200 and he worked before you download the firmware without success.  Can the wireless connection be restored?

  Hi shirley_h,

  Rerun the update of the firmware on the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-95176-3&cc=us&DLC=en&LC=en&OS=4063&product=4110396&sw_lang=

• Can I print my own business cards using HP phtosmart?

  I have a HPC4500. Y at - it software to print business cards customized with a picture on them?

  Jugo,

  What I would recommend you do is to download the Avery Label Pro add-in for Word and use it. What we must remember what using it however, is change print you 8.5 x 11 borderless settings when printing. Otherwise, your business cards print about 1/4 inch, especially towards the bottom of the page.

  You can print on cardstock and cut out them yourself or use business cards Avery.

• OfficeJet Pro 8610: business card printing Officejet Pro 8610

  Recently purchased the officejet Pro 8610 and I was wondering what is the best type of paper or stock for printing business cards

  (Matt and glossy paper types)?

  @himrajbir

  I used Avery "Clean Edge business cards" for a number of years.

  Ink jet business cards Avery #8871

  Regardless of the make or model, buy the right cards for your type of printer:

  Ink Jet

  Help, Suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Laserjet1300 print on business cards?

  Trying to figure out how to print business cards with my 1300.  Have adjusted the size of paper/stock, but could not get any Arthur f.  Any help on this will be appreciated.

  Thanks for the kind yr and quick response.  I'll give it a try.  Best regards, TominTexas