Hijack.DisplayProperties malware appears on the clean install

Similar Questions

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• Synchronization problems with the clean install

  Hello.

  Is it possible to push the content of my iPhone to my computer? (and not the other way around)

  Recently, I did a clean install on my Mac Pro and trying to get everything in working order. I got a load of music and voice notes on my iPhone that I don't want to lose, but the only way iTunes will allow me to manage the content of my phone is erasing all the content on my phone to sync to the 'new' library

  Help, please!

  Thank you

  A new installation of the operating system shouldn't have deleted personal data files unless you want to say that you have done more than a "clean install". You do not install the data files.  Looks like that erase you the iTunes library file and it was a big mistake because it is towards this specific copy of the file iTunes Library.itl that tries to sync your phone.

  Your i-device was not designed for unique storage of your media. It is not that a transfer backup device and media has been planned with you keep a master copy of your media on a computer that is in itself independently supported against loss.  To use a device with a different configuration, you pass the old library from a computer or a backup directly in the new configuration, not the device to the library. Synchronization of media isn't a way, computer device, update the contents of the device to the content on the computer, update or restore the content on a computer from a device. The exception is media to iTunes Store purchases that can be transferred to a computer.

  Re-download or transfer your purchases iTunes Store for the iPhone, iPad or iPod to computer - https://support.apple.com/HT201267 - 'this feature only works for content purchased from the iTunes Store. From iOS9 is more apps that now need to be re-downloaded directly from the store.

  To transfer other items from an i-device to a computer, you will need to use third-party commercial software.  See this document in turingtest2: recover your iTunes library from your iPod or device iOS - https://discussions.apple.com/docs/DOC-3991 even this method can fully recover what you originally had in the library. For example, in order to save space during synchronization if you had converted music files at a lower rate, or photos at a lower resolution, it is these lower quality files that will pick you up.

  If you subscribe to the Apple music, titles that are not part of the content that you have purchased or downloaded may not be transferred and must be downloaded directly from iCloud.

  To see other items: import photos and videos from your iPhone, iPad, or iPod touch - https://support.apple.com/HT201302 - are those you have taken yourself.

• ForecastFox does not appear on a clean install of FF5 with active addon-bar and bar state-4-Eva installed.

  Newly formatted PC, Windows Vista. I did an installation of FF5, pulled down as the default download on the Mozilla site. Installed forecast Fox, did not show. Turned on the toolbar of the add-on, it now shows icons FireBug and anti-ad, but no ForecastFox. I installed the toolbar state-4-Eva, changed icons alignment right, but still no ForecastFox

  What stupid way of doing things in this extension! I've been using Firefox since 2002, have used or tried hundreds of different extensions, and it took me almost 10 minutes to understand how it works.
  No help here - http://www.getforecastfox.com/ - and the image is for a Mac, which is like what, 5% of the Firefox user "market."
  And their 'support' - Questions? Need help? - http://groups.google.com/group/forecastfox-users/ - shown on the download page, has very little 'answers', especially a bunch of questions from lost users.

  ForecastFox display is on the Menu bar, which is hidden by default in Firefox 4.0 and later versions on free software most, with the exception of WinXP - but it must appear when the customization mode is open, they are the tabs on top is selected or not. (I have no idea why it does not appear in your screenshot). You can also see if you press the Alt key, you must open view > toolbars and click on the menu bar to have it open all the time.

  More there is no instructions on how to configure and use this extension and is not easily detectable - they should use a 'premiere' page on the Options page of forecastfox with some kind of instructions and screenshots for all operating systems.
  
  http://www.getforecastfox.com/customize/16/ - to change the Options, such as adding a 'place', change 'units', etc. And the 'button' to 'customize' or move the screen only appears when this page is loaded in Firefox, even in a tab that is not displayed! (And that brings up a security problem with Firefox, because it is not a "secure" page, but it's something I'll bring in support of the Addon for one or one at Bugzilla)

  "Screen" can be moved to a different toolbar, but you need the mode customize open and 'slide' + with the circle around it (which only seems to be present during the loading of this page - http://www.getforecastfox.com/customize/16/ - in Firefox), to be able to move the screen to a different location. In addition, a lack of "convention" with personalization, use cursor changes that are not the same as with the other tens of thousands of Firefox Add - ons that are available for Firefox. "A helping hand with the extended index" is the usual cursor used to display the 'sweet spot' to 'slide' mode customize, but this extension uses the cursor to "move" instead - the ToolTip for that says "move".
  "Drag and drop to move Forecastfox.
  ' Close the page options to hide this icon.

  See CSS2 Cursor property - http://www.gtalbot.org/DHTMLSection/Cursors.html

  I hope that answers all your questions with the Forecastfox add-on.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/Forecastfox-weather/

• How to get the software HP Coolsense works again after the clean install (win7)?

  I recently purchased a DV7 6014TX and upgraded to an SSD and a clean install of the retail version of windows 7 64-bit. I want to know how do HP Coolsense works again? I saved the folder drivers of my original hard drive SW and I so all people. SP52814, I downloaded the installer coolsense, but it doesn't seem to work. Any input on this would be highly appreciated.

  Coolsense also requires HP Support Assistant see links below

  HP Notebook PC - on CoolSense technology

  Download

  HP Support Assistant

• After the clean install kernel panic

  Hey people,

  Gone through these forums for a good while but the first assignment in time...

  Small story is that I have a macbook pro 2010 mid runs the mavericks, 8 GB ram, 1 TB SSHD. My mac suddenly rebooted and then got stuck in a reboot loop, screen display multilingual "your computer restarted because of a problem", I understand that this is a possible kernel panic.

  After much tinkering, I did a clean install of Mavericks on my player (I did a few times before) and now my mac still restarts regularly... the last crash report is less to...

  Thanks to everyone who has all the answers!

  Anonymous UUID: 18795270-0A64-9C43-DC5A-D2621405E611

  Mar 23 11:35:16 Feb 2016

  panic (cpu 0 0xffffff80032526cf appellant): "an element of the liberated area has been changed: expected 0xdeadbeefdeadbeef but found 0xdeadbeebdeadbeef, wicks 0 400000000 changed x, 8192 2704 offset in the area: buf.8192"@/SourceCache/xnu/xnu-2422.115.4/osfmk/kern/zalloc.c:461.

  Backtrace (CPU 0), frame: return address

  0xffffff81050d3480: 0xffffff8003222f79

  0xffffff81050d3500: 0xffffff80032526cf

  0xffffff81050d3560: 0xffffff8003251dc9

  0xffffff81050d3660: 0xffffff80033c8daa

  0xffffff81050d36c0: 0xffffff80033c879b

  0xffffff81050d3790: 0xffffff80033c7a61

  0xffffff81050d37d0: 0xffffff80033c7c37

  0xffffff81050d37f0: 0xffffff80035584b2

  0xffffff81050d3850: 0xffffff80035942dc

  0xffffff81050d3870: 0xffffff8003595303

  0xffffff81050d3910: 0xffffff8003591455

  0xffffff81050d3a20: 0xffffff800355ddc0

  0xffffff81050d3bb0: 0xffffff800355711f

  0xffffff81050d3da0: 0xffffff80033fff0c

  0xffffff81050d3e50: 0xffffff80033edc36

  0xffffff81050d3f50: 0xffffff8003640c63

  0xffffff81050d3fb0: 0xffffff80032f4176

  Corresponding to the current thread BSD process name: mds

  Mac OS version:

  13F34

  Kernel version:

  13.4.0 Darwin kernel version: Sun Aug 17 19:50:11 CDT 2014; root:XNU-2422.115.4~1/RELEASE_X86_64

  Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0

  Slide kernel: 0 x 0000000003000000

  Text of core base: 0xffffff8003200000

  Name of system model: MacBookPro7, 1 (Mac-F222BEC8)

  Availability of the system in nanoseconds: 61740424811

  last load kext to 13925356367: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f8477f000 size 32768)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.60

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 100.14.34

  3.5.13 com.apple.driver.AppleUpstreamUserClient

  com.apple.iokit.IOBluetoothSerialManager 4.2.7f3

  8.2.4 com.apple.GeForceTesla

  com.apple.nvidia.NVDAStartup 8.2.6

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4

  com.apple.driver.AppleHDA 2.6.3f4

  com.apple.driver.AppleMikeyDriver 2.6.3f4

  com.apple.driver.AppleSMCLMU 2.0.4d1

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.IOUserEthernet 1.0.0d1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleLPC 1.7.0

  com.apple.iokit.IOBluetoothUSBDFU 4.2.7f3

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3

  com.apple.driver.AppleMuxControl 3.6.22

  com.apple.driver.AppleBacklight 170.4.11

  com.apple.driver.AppleMCCSControl 1.2.5

  com.apple.driver.SMCMotionSensor 3.0.4d1

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.BootCache 35

  com.apple.driver.AppleIRController 325.7

  com.apple.driver.AppleUSBTCKeyEventDriver 240.2

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleUSBCardReader 3.4.1

  com.apple.driver.XsanFilter 404

  com.apple.iokit.SCSITaskUserClient 3.6.7

  com.apple.iokit.IOAHCIBlockStorage 2.6.0

  com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2

  com.apple.driver.AirPort.Brcm4331 700.20.22

  com.apple.driver.AppleUSBHub 683.4.0

  com.apple.driver.AppleFWOHCI 5.0.2

  com.apple.driver.AppleAHCIPort 3.0.5

  com.apple.driver.AppleUSBOHCI 656.4.1

  com.apple.driver.AppleUSBEHCI 660.4.0

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIBut

  Model: MacBookPro7, 1, MBP71.0039.B0E of BootROM, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, MSC 1.62f7

  Graphics card: NVIDIA GeForce 320 M, NVIDIA GeForce 320 M, PCI, 256 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x859B, 0x435434473353313036374D2E4D3136464B44

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)

  Bluetooth: Version 4.2.7f3 14616, 3 services, 23 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: ST1000LM014-1EJ164, 1 TB

  Serial ATA Device: HL-DT-ST DVD - RW GS23N

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  Bus crush: k

  panic (cpu 0 0xffffff80032526cf appellant): "an element of the liberated area has been changed: expected 0xdeadbeefdeadbeef but found 0xdeadbeebdeadbeef, wicks 0 400000000 changed x, 8192 2704 offset in the area: buf.8192"@/SourceCache/xnu/xnu-2422.115.4/osfmk/kern/zalloc.c:461.

  expected 0xdeadbeefdeadbeef

  but found 0xdeadbeebdeadbeef

  Very likely bad RAM.

  Contact the company that provided your RAM upgrade and get them to replace your RAM.

  Within the forum, Curcial.com and MacSales.com (OWC) are the most recommended, for quality of RAM provided Mac and customer support should something go wrong.

• Satellite P200 - 17 c: Question on the clean install of Vista

  Hello

  I have the Toshiba P200 - 17 c Personal Computer and I don't want programs like Norton ISI because I want to install my own I, so thought to format the drive to install Vista Premium on its own and then install the drivers and the utilities of the download on the Toshiba webssite section, but, after reading the thread at this link :

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28091&TSTART=45

  I see that some users who also have this pc had problems to install the drivers and utilities, that they got on the site for their P200 - 17 c. A user who installed instead of Vista Premium Professional Vista and then tried to install the drivers/utilities for Vista Business that he has downloaded from toshiba and was getting errors like "invalid serial number."

  I still want to use Vista Premium on my P200 - 17 c and then install my Toshiba approved some drivers/utilities. Surely in this case, all the drivers should install without problem on the same model computer and s/n?

  Concerning

  Brave

  Hello

  The European driver Toshiba page provides the drivers for Vista OS. This means that these drivers must be compatible with all versions of Vista. There should be no problem because all the Vista OS s use the same kernel!

  But note; If you use the clean Vista you must also use a compatible serial for a Vista version right key. In addition, you should note that there are different sets of P200 and so good drivers for the series on the right should be choose in download form.

  All that s

• HP envy 14-2090eo: in what order should drivers installed better when you do the clean install

  Hi HP experts...

  I want to do a clean install of my Windows 7 Home premium 64-bit, and I've always used my recovery disks when it was necessary to format and subsequently updated all the drivers in the support section and drivers HP, but it is a slow process, and I'm not even in what order I should update drivers when it that way or the other , and often a message jumped ud saying ' the driver is not properly installed - try again or the driver is installed correctly. But as mentioned, I want to do a clean install with my Windows 7 Home premium 64-bit disk and would like some experts advise on order in which drivers must be installed. Can anyone help?

  Best regards hpenvy1

  Hello:

  The order generally recognized installation of the driver is:

  1 install the chipset driver and restart.

  2. install the graphics driver and restart.

  3. install the audio driver and restarted.

  4 install the ethernet driver.

  5. install the wireless driver.

  Then you can install a driver you want.

  I also do a practice to update to the latest service pack before installing the drivers, if any.

• HP pavilion dv 6-2070eo: unknown unit in the device after the clean install Manager

  My product: HP Pavilion DV 6-2070eo

  Product number: VJ346EA #UUW

  Windows 7 Home premium 64-bit

  Hi HP experts...

  I just did a clean install of windows and installed all the drivers - installed Microsoft security essentials - windows update updates entirely, but in Device Manager it is a unknown unit with a yellow icon. When I double click on the unknown unit, it says location on bridge isa standard pci and beneith which - drivers for this device are not installed (code 28). What kind of driver I'm missing? Now, I wanted to check for other drivers, but I couldn't find any other drivers because the driver download page are not available at the moment on the site of HP

  Best regards hpenvy1

  Hello:

  Yes, that's what I needed.

  You need the driver for this device...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_79533_2

  You don't need to worry about the EEG W10 icon.

  You can download W10 directly from Microsoft.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Download the 64-bit installation program and do the immediate upgrade option.

  Then you can go back and make the W10 DVD or USB flash drive.

  I'm not very confident that your laptop can run W10.

  Most likely, audio, graphics and without wire do not work and there is no drivers to make them work.

  But you can give it a shot and see what happens.

• New R13 - R7 - 372T: Tools missing after the clean install

  Hello!

  I got my R13 - R7 - 372T today and I want to do a clean install of Windows 10. I checked the Acer site and saw that most of the drivers are available on the download page, I also found the abApps (Portal of Acer and) download ( https://www.cloud.acer.com/ops/downloads) where I need those who one day but its seems that some of the pre-installed tools/applications are missing. How can I reinstall the following tools if I wipe my device? (I have already created a backup of the recovery partition but I need regular installation files):

  -Acer care center (edit: I found a link for verification of compatibility to download it here: http://www.acer.com/ac/en/MY/content/software-acer-care-center )

  -Acer Hover access (edit: found the link for flight stationary access here: http://go.acer.com/?id=18022#_ga=1.267060686.114307318.1458377954 but not sure of the version)

  -Dolby X 2 Audio Windows App

  -Acer Audio utility invert (makes that actually do?)

  I'm a little disappointed that Acer does not offer those by convenient download as the rest of the drivers and application of quick access for example. So where can I download those, or how I at least check out them of the recovery media that I created?

  Edit: Looks like after some experiences of most of the tools I mentioned is unnecessary (so I removed them from the list) or available by searching around for a while. However the 2 above mentioned utilities are still missing.

  Thank you!

  Alex

  Dolby

  Go to Manager of device/Audio inputs and outputs / RealTek High Definition Audio speakers / right click and uninstall.

  Go to C:/drivers/setup and install. Otherwise it

  Audio

  Realtek

  Audio driver

  6.0.1.7288

  386,0 MB

  04/11/2014

  Download

  Don't restart yet.

  Go to PCEE4/Dolby Home Theater / double click and install/reboot.

  Audio Acer utility to invert

  I don't know what it is. Nobody seems to know.

• Windows 7 does not connect to the internet after the clean install

  I did a clean install on my Windows 7 computer, but means doing so my computer not connect to internet more that connection drivers were lost. I'm going back between Web sites up-to-date, but without success. I someone could direct me to the link with the appropriate driver if I give you my ibs material?

  If you purchased your computer with Windows 7 preinstalled, the computer or the manufacturer of the laptop computer uses drivers for it.

  If you have installed Windows 7, you can always go and find Windows 7 drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  Examples.

  Dell drivers:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  HP drivers:

  http://WWW8.HP.com/us/en/drivers.html

  Drivers Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon

• How to uninstall Windows 7 32 bit or get the clean install of Windows 7 64 bit to work properly.

  Today, I bought and installed windows 7 32 bit as an upgrade from vista 32-bit, shortly after I spoke to my friend and he told me that I could have used the disk for 64-bit and Windows 7 64 bit instead, the problem now is that I can't find a way to remove windows 7 32 bits using other methods I've seen here as the file Windows.old, it isn't here. Also I cannot perform a clean Windows 7 32-bit to windows 7 64 bit installation because when I insert the disk it says that I need to boot from the disk, so I tried then whenever he says failed to load. IM fine with doing a clean install and losing what I have, because I have them the settings and files saved externally already so no need to save again.

  Thank you very much

  Mango

  Looks like you're stuck with a clean install of Vista's original support for start.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Using the media update for windows 7 (from vista), can I now re - install 7 via the clean install option, even if it is the path I have chosen when first installing 7 first?

  With a 7 upgrade version (not the full version) I could not use the upgrade option to install 7 on Vista, because it asked me to uninstall 2 programs that would not work in 7 with installation before you begin.  I couldn't do it because my Windows Installer is missing on my computer. (In fact, I couldn't even run the Windows Upgrade Advisor before proceeding with the installation because this program must be installed on your computer before you can run) So, I chose to use the custom installation and it worked fine, except that my computer is now worse than with vista. Thinking that it was because he kept all the vista files (windows.old) I deleted this file, but he did that give back me my hard drive space. I would like to make a re-install using this same version upgrade disc, but I've heard that I can not do a clean install, if the original operating system is not currently on the computer (using the version upgrade 7, not the full version), and I guess that's is more on my computer with the exception of fragments which I affect 7 performance. If this is true, what should I do? If I have to go to the full version, is there a way I can just pay the difference between what I already bought and version complete, or will lose money that I spent on the upgrade version, and buy the full version outright? Bottom line is this:  I want to just Vista on my computer for GOOD!  I don't want something that looks even left of Vista on my computer. I'm sacrificing all my programs to do it with a clean install, but it's better than all the headaches, I got Vista! Thanks in advance for all you can give me advice.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• After the clean install 2 drivers required

  HP Mini 1151 PC NR
  SN: {removed privacy}
  P/N NM123UA #ABA

  I had to do a clean install of Windows XP, now updated to SP3, but the 2 drivers are missing.
  SM Bus controller.
  Webcam-101.

  I have looked on "support.hp.com" for these drivers, but can not find them.

  Could you please give me the correct address to find these drivers?

  Hello

  Download and install the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42295.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• How to re-enable Lightroom after losing during the clean install of windows

  I lost Lightroom when I had to do a clean install of windows 10. Am now uploading. How to re-enable it?

  Hi DMC,.

  Please use the following link to download Lightroom: Photoshop Lightroom Installer

  See also, find the serial number of your product Adobe quickly

  Let us know if that helps.