Hiro H50113 USB modem works only with Windows 7 64 bit

Similar Questions

• Flash CS4 works only with Windows 7 64-bit and Kaspersky Internet Security

  I have a new computer to core i5 Windows 7 64 bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 answers so that it is completely unusable. Uninstall KIS and it works quite well. I already read on another forum that someone of another encounter the same problem with the same combination of products. Does anyone else have this problem amd If Yes, how do you solve? I posted on the forum of Kaspersky without solution so far.

  Norton works OK with Windows 7 (64) and CS4?

  Your chance.  After a week of research I found someone who has thought about it.  Apparently his self-defense of Kaspersky which is causing the problem.  Under options disable control external sevice disable.  For me, that did the trick.  If it does not for you also try to disable self-defense under both options.  Once I did it was moving smooth again.

• Card USB Reader works only with Windows 7 Final

  My internal card reader is not recognized by Windows 7.  I have uninstalled and installed the drivers of many times without effect.  When I installed the drivers from the website of manufacturers or automatically by Windows, it is not recognized.  After installing it manually through the Device Manager, it is now recognized, but returns the error: this device cannot start. (Code 10).  This device worked perfectly with Vista, Win 7 Beta and Win 7 RC.  The USB port on the card reader works, but not the card reader itself.  Can I use an external card reader and read the card.  The driver is: 6.1.7100.30093 by Realtek.

  Marc and Daniel,
  I solved the problem.  I have checked the connections to the motherboard and swapped USB1 and USB2 connections.  When I reconnected it everything the computer would not start.  I disconnected the connections usb case before and tried and it worked.  It seems that one of the two connections business is bad and the card reader to stop working at the origin.

  Thanks for all your help.
  Ed

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Pavilion 500-090 USB driver works only with windows 7

  Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?

  Hello:

  Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• Wireless USB mouse works only with Windows 7

  When I plug the usb antenna, it recognizes and installs successfully the mouse.  I then sync the two but the mouse does not work.  In the device, the mouse Manager is listed under "Human Interface Devices" as an "input USB device..."  I deleted and reinstalled, rebooted my computer and several other things but still cannot make it work...

  Any suggestions?

  Thank you
  SGT Cren

  I guess that your USB ports are in need of a better driver. It is probably in your drivers "chipset".

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• DeskJet 722C works only with Windows 7

  OK, so I applied the DJ_Patch as described. (See http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-710-720-810-820-100-Series-prin... ) I have Windows 7, 64-bit and a HP Deskjet 722 C printer.  Tried to print the test page, but received the error from the printer.  Tried to add a printer, you are looking for the 722C, but it is not on the list, even tried to do Windows Update to search for my printer.   Tried to restart, which did not work or the other.  Still get error printer.  I appreciate any other suggestions.  BTW, the printer is connected via a USB to parallel port cable.

  My HP Deskjet 722C now works!  I spent several hours trying different things only to find out it was the cable use to connect the printer to our new computer.  He is there not a lot of info on the package of cable but if you watched closely he said it worked only with Win XP, me and Vista.  Who would have thought that the cable wasn't working with some BONE... me!  Once we went and bought a new cable ($40, Ouch!), we were running a few minutes.  I don't know that a cheaper cable is available online.

  I wanted to post this in the hope of saving someone money, time and frustration on the other.

• HP cp1700 printer works only with Windows 8

  My HP cp1700 printer no longer works with Windows 8, but worked well with Windows 7. It is visible in printers and faxes, but displays always 'offline '. This utility is not correct the problem and I could not find any solution working on the forum. HP support reminds me of Windows drivers, which are installed. I uninstalled and reinstalled the printer with hard boots but I have always the same question. Any ideas?

  Problem solved with the driver HP CP1700 for Windows 8

  1 module printer via a usb cable to your pc

  2 turn on your printer and let windows to install the printer

  3. go to control panel of configuration, devices and printers, and locate the hp cp1700

  4. right click, properties, hardware, again, then click on to the left of the change settings tab

  5. on the driver tab, click roll-back of driver which previous version of 2012 at the 2006 pilot

  6 follow steps 3 and click on put updated driver and click search automatically and the winows 8 will find for the driver you on the internet and you will have all the features that have been installed for your printer in the end.

  Hope you enjoy this :)))

• SENTINEL HASP KEYS 3.25 WORKS ONLY WITH WINDOWS 7

  I lived several of these posts here about the hasp and windows keys 7 and I tried many suggested fixes, but nothing works. I installed the software using Windows XP Mode in Virtual PC, I've updated, uninstalled drivers, reinstalled with and without the hasp key inserted. I use the Sigmanest V4, Mastercam9, and Mastercam10 software. All three of these programs worked fine with Windows XP service Pack 3. I did everything that I mentioned above and some of which you try to run the software in compatibility mode. Nothing I try works, Sigmanest software seems like it is recognizing the hasp key because it will be open, but it will not open in demo mode. The two programs Mastercam do not even recognize the hasp key. They open up and say that there is no present hasp key, then close. After years that Windows 7 has been out someone got a solution for this. Maybe they have, but I can't?

  Hello Chad,

  Thanks for posting your query on Microsoft Community forum.

  According to the description of your problem, it seems that you are trying to install the drivers for the Sentinel 3.25 HASP key. I checked the official site, it shows drivers for Windows, but did not mention the version of Windows.

  Here is the link: http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=End+User&p=HASP+HL&o=Windows&t=Runtime+%26+Device+Driver&l=all#.

  I also checked this device and software Center of Microsoft Compatibility, and I couldn't find any information out there in that regard. So I suggest you to contact technical support SENITEL for troubleshooting further because they are the best people who can say that this device is compatible with Windows 7 or not.

  Hope this information is useful. Do get back to us after contacting them and please update your question on the forum.

  Thank you.

• USB 2.0 Slim Portable optical drive works only with Windows 8

  Hello

  I recently bought an external optical drive (USB slim portable optical drive;) DVD + RW/BLU-RAY disc). When I plugged in my lenovo with windows 8. the computer does not even recognize any device connected to it. The optical drive does even turn on. I don't know if it's a problem with the player or what he is.
  I would apreciate for this assistance.

  Hello

  It is possible that the drive is faulty, but there may be a setting of conservation of power on your laptop, originally a problem as well...

  If you go to Power Options... 'Change Plan settings' on the right in blue text... then 'Change advanced power' also in the blue text, you will get a window where you can change the default power settings.

  You can temporarily disable or modify everything related to your USB...

  You can also go to Device Manager... 'Bus USB controllers' and see if you can determine what Hub or your disk controller is attached to and temporarily disable power save...

  Maybe it's that your computer does simply not provide enough power to the drive...

  Can you pass the cables to different ports to see if that helps?

  USB 3.0 ports supply more power, is that you have a...

  You have all the gadgets AC adapter that power via a USB connector, you can try?

  You could try a friends computer or something for a simple test...

  When USB powered external drives first came out, there were many problems with insufficient availability. Even after the use of two Sockets USB problem remained to a lesser extent...

  USB 3.0 has a higher power to try to resolve many of these issues.

• NB100 3 G Ericsson F3507g works only with Windows 7

  I did everything and I can't get it to work under Windows 7, although it works on Windows XP.
  I already updated the firmware of the modem to the last R1D06 (I had to downgrade to XP to do it, because in windows 7, program reviews "No module" find.)
  I installed the latest drivers for win 7 32 Toshiba, as well as the latest Wireless Manager (R2V2)
  What is happening is as follows. I start Wireless Manager, and request the SIM PIN code. After I insert the code PIN SIM "success" icon appears. After a few seconds of this 'Success' icon the icon "the mobile broadband device is not found" is displayed briefly and then the animation "initializing the device mobile brodband" appears... After the PIN code request page back... If I insert the PIN again once I have the same story...
  Can someone please help me, because it's driving me crazy?
  Thank you.
  Manuel Quinaz

  Hey Buddy,

  This really strange story... I tested the modem 3G with Windows 7 and the drivers of Toshiba page. In my case it works correctly, I have problems.
  The only problem I've had is that the SIM card was not recognized, but the solution was a simple reboot.

  You have another SIM card that you can test? The SIM isn't working properly and to test another might be worth a try. ;)

• Intel Wimax 5350 works only with windows 7/t400

  As someone who uses the Server 2008 on my desktop, when I received my t400 a few days ago I hesitated at the idea of using vista.  so I decided to download and install windows 7 64-bit (Vista 32 bit... I did an install own good... I think).  I haven't heard of anyone having problems with the drivers wireless in windows 7 and, indeed, intel States on their site that windows 7 will automatically install the drivers for the card 5350 wireless.

  Unfortunately, during the installation of windows 7 was complete the drivers were not installed and I don't have access to the internet.  I therefore had to take my Office Wireless usb adapter, then plug it to access the internet.  Windows Update has not fixed the problem.  so I installed the visa of intel 64-bit drivers and windows told me that my wimax device has been recognized, the drivers have been installed, etc.

  except the wireless card still does not work!  He is currently under listening network cards as area network/2 connection cable unplugged/intel wimax link 5350.  I do not understand... should not it listed as being a wireless network connect as is my usb adapter?

  I think that the problem might be that in Device Manager, I don't have a driver for the controller network, serial port pci or pci simple communications controller.

  It is quite frustrating and I really regret not putting more thought in this installation of windows 7.

  Thanks for the help

  I have a T400 with 5350 Intel and Windows 7 x 64, I downloaded and installed the

  Intel PRO / Wireless and WiFi Link drivers only for Windows Vista * (3298 KB) and the

  Intel® utility connection WiMAX PROSet/Wireless for Windows Vista * 64-bit (9206KB) from the Web site below.

  http://Downloadcenter.Intel.com

  Furthermore, my "Intel(r) WiFi Link 5350' and ' Intel WiMAX Link 5350" listed in the "Network adapters" category, I have not any category 'Wireless Network Connect' at all. "

  I hope this helps!

• Microphone works only with Windows 7 and StarCraft 2

  I have Windows 7 64 bit is installed on a computer HP Pavilion Elite (HP-M9600T), and I'm having problems to make my microphone to work with Windows 7 and Starcraft 2 (SC2).  The strange part is that I have an old analog microphone that works, but it's quality is very bad.  I bought 3 or 4 new microphones (some analog other USB) and none of them have worked.  I tried standalone and headset microphones.

  Whenever I tried a new micro, I went in the 'Sound' Panel and check that the microphone is not muted.  I check that the microphone level is high (and if mic boost is available I assure me that it is also at the top).  Then I test the microphone via the 'Listen to this device' feature in the properties of Microphone Panel and can hear my voice through my speakers when I talk.  I also see the green bar on the acoustic Panel fluctuate everytime I speak.  However, no one can hear me when I play StarCraft 2 unless I unplug the new microphone and plug the old microphone.  StartCraft 2 settings are configured to use the default device and StarCraft 2 also has a test feature of "Listen to this device" and I can hear my voice through the speakers.  Just like in the sound Panel, when I speak I can see the Soundbar of StarCraft 2 fluctuate in recognition of my voice.  However, only the old work of mic.  If my old microphone had a mute and better quality, I would ignore the problem.  However, this is not so I would get a new mic work.

  All the drivers seem to be up-to-date and indicate that they are working correctly.  I uninstalled and reinstalled StarCraft 2.  I also reinstalled Windows 7.  I used two generic drivers and installed the drivers RealTek supplied with my machine.  The two sets of drivers give me the same result.  I thought they might be in conflict, so I uninstalled the RealTek drivers, but I got the same result.  Teh generic drivers recognize my mic fine, but no one can hear me.  Any ideas?

  

  Hi tlonni,

  You can try the following steps and check if it helps to solve the problem.

  a. Click Start, click Control Panel and then double-click sounds.

  b. in the sound dialog box, click the recording tab, click on the microphone and then click Properties.

  c. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.