His Cup on one channel intermittently
I'm not looking. I couldn't find something else that some posts related to another model suggested opening the appliance and out of a soldering iron. I hope that there is a better way.
I have a 8 GB rocket. The stereo seems to reduce or cut out completely on the left side. Sometimes it makes it all a few seconds all the time on what it is, I have sometimes a few hours where he arrived at all. Headphones have been replaced twice... I was SURE it was the helmet initially because they were older. Unit never fell, torn off, hit or otherwise abused. I am royally annoyed since I am the thing for sound quality that it can play flacs, and other than this problem, I'm very happy with it. "Other than this problem" is a bit of laugh because it ruins completely at the point of a portable music player for the sound flicker in one ear.
If it is a known problem could someone link me to the appropriate help thread?
Thank you
Hate to say it, but this sounds like a bad connection, which means a physical repair, which means that you will have to do it yourself. If it's under a year, you have a guarantee; If this isn't the case, you're kind of stuck.
Tags: SanDisk Sansa
Similar Questions
-
His Cup on my Satellite L50-B-23F
His Cup on my B-L50-23f when I move the laptop screen or I press a sound button. I uninstalled and reinstalled and still is faulty
I can't say for sure, but I'm afraid that there must be some hardware related issue (Speaker Wire) and your laptop must be controlled by the authorized service provider.
-
my mother has two computers that are running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other. We network cables and such can I connect the on computers and share information from one to the other?
Hello
To connect two computers with a cable, not a router, it must be a crossover cable.
These are special cables, but they are not expensive.(You can configure a network or a host group (see below))
Connect two computers using a crossover cable (XP - Windows 7 may be the same)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cableIt is a description however computer stores will sell them at low cost.
http://en.Wikipedia.org/wiki/Ethernet_crossover_cableAmazon - example of a crossover cable
http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT--------------------------
You can also use Easy Transfer
Transferring files and settings: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questionsHow Windows Easy Transfer makes setting up a computer easier?
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easierWindows 7 Easy Transfer
http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-easy-transferHow to get an easy transfer cable
http://Windows.Microsoft.com/is-is/Windows7/how-to-get-an-easy-transfer-cable------------------------
These should help:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroupHomegroup from start to finish
http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finishAccess to files and printers on other homegroup computers
http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computersFile sharing essentials
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentialsShare files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone=========================================
More help at these locations: (Vista references also apply to Windows 7)
Vista - LAN
http://www.onecomputerguy.com/Networking/vista_network.htmVista network and sharing Center
http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htmSetting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Is it possible to easily just change the first part of the path from one channel to the other?
Due to a disk failure, the first part of the path to the library changed and disconnected so many photos that I've been using photoshop for more than 8 years. I am running windows 7 with photoshop elements 14. An example is the original path was 3 28 \\dualdisk02\bobk\myphotos\2010 and now the path is 3 28 \\dualdisk03\latk\myphotos\2010 is it possible to easily just change the first part of the path from one channel to the other?
Go to the forum of elements
-
First, my sound ceases to die.
Whether on youtube, video games, or just watch a movie via VLC player, the sound just stops randomly. If I refresh the page (like YouTube), he returned for a few moments, before he dies again.The funny thing is, if I plug into one audio of my headphone jack, it again for a while, and then when it stops, I just unplug the unit, and it starts again.
Go wonder?Current drivers:
HDAD AMD: 7.12.0.7719
Conexant SAMI: 8.51.1.0Thoughts?
The other issue I have is with my graphic drivers.
If I try to use the latest drivers, any game I play (tested with MOH:AA and World of Warcraft) randomly hangs my computer, so I have to do a hard reset.So now I'm stuck with the drivers from 2011.
What is happening with this?Kind regards
With regard to the use of drivers of graphics cards:
I assume that you have downloaded the latest driver for AMD/ATI page?
Is this correct?
This GPU manufacturer drivers don t feature additional support which allows you to control the temperature of the GPU.I can't say for sure if the high temperature causes the problem, but it might be possible that due to the increase in temperature (temperature increases everything by playing games of high performance) the system hangs. However can the laptop freezes because of compatibility problems between the game and the driver GPU.
That is why it s recommended to use drivers from Toshiba page even if the driver is a little older.
With regard to the sound:
I guess that this problem is related to the Conexant driver and could be easily resolved by upgrading the driver.
The update can be a little tricky because the laptop is a little older, and look for driver audio Conexant out other models of laptops.However, I discovered that Satellite C55 - B supports also the Conexant audio driver. There is a newer version (at this time v8.65.38.50 for Win 7)
First uninstall the old driver audio Conexant. You can do it in Device Manager.
After removing the old driver, restart the laptop. Then, install the latest version and restart once more.
After that, check the sound performance. -
How do you make an average of only ONE channel in the analysis?
How do you carry the 'average' function in the analysis using a single channel? Currently I have to for this by hand in the .csv file I import to tiara. I prefer not to do so because of scripting.
-
Media Center not display or record one channel. Signal OK
I have an ATI tuner card in a desktop under Vista Home Premium PC. When I run Setup of Media Center, he finds all the channels. When I select in this case channel 56.1 (or 56.2 and 56.3) I get nothing. As a result, I can't save this channel either. I'm in the Los Angeles area, with a roof antenna, the signal strength is not the problem.
If I use the ATI application, the channel comes very well and records too.
I have a laptop running Windows 7. I just bought a key USB from Hauppauge. Windows Media Center detects all channels, and on this configuration, I can view 56.1 etc.. BUT, when I select a program to record from the EPG, it not save and give an error message that there is no signal. If I look at the same channel when a record event program starts, the screen goes black, and the level of the signal LED on the USB turns off.
As with the other computer, the application supplied with the device works very well on the channel in question.
On both computers, I tried to manually add the channel (the physical channel is 32), no luck. All the other channels, with the exception of the 56 works very well.
My conclusion is that the electronic Program Guide to be a mistake for this channel. As it does on two different computers with two different tuners, two different antennas and all other channels work fine, I don't see how it could be a hardware problem.
For any help or suggestions would be most appreciated!
Hello
Method 1:
You can also create a new user account with administrative privileges and try to save channel in Windows Media Center. If it works fine, it means that the other user account is damaged.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Access the link below and follow the steps to fix a corrupted user profile: http://windows.microsoft.com/en-US/Windows-vista/Fix-a-corrupted-user-profile
Method 2:
If the problem persists, you can try the steps and check:
a. go to settings-guide-add missing channels.
b. type in right channel # (like 8.1).
c. then put in the right frequency for the station live.
d. now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists.
e. can change the list source to the channel that you have problems with. Then go to tv setting-tv digital signal signal strength.
f. then UN check channel which did not properly record to remove it from the guide.
You can access the link below and follow the steps to solve the problem with the recording on your Media center.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer -
Firefox only plays in one channel?
I have this example file where in firefox plays the audio in the left lane only. I've already imported mp3 and ogg files, but continues to play in a single channel audio ogg.
Looks like a local problem (with your driver/card sound/speaker). You can try it in another machine?
-
His equalizer in both channels?
Hello
A small question really,
I recorded the sounds through a channel unfortunatley and want to know if prem8 can equalize it somehow to make it appear more than 2 channels?
I know it can be done in Adobe Audition (phase correction?) but my trial has expired and I can't afford to buy the program at this time.
Any advice would be most appreciated.
Thanks in advance!
n
If you have saved the channel left or right using the right or left filling fill to duplicate the channel.
See you soon,.
--
Neale
Insanity is hereditary, get you your children -
His cup during the preview or project
I am brand new to items with a PC brand nine (i7, 16 GB of RAM). I imported all my videos but when I try it in preview mode, I hear about 3-4 seconds and then it shuts down. I pause, restart, rewind, fast forward and still no sound. If I close the window preview and re - open, I get again my initials 3-4 seconds and then nothing. I tried to drag the clip to the timeline and playing the project and still the same thing. I can open the clip in Photoshop Elements or Windows Explorer and the sound plays without problem. First is the only open program. Help, please.
Do you mean that the sound stops always exactly at the same place in your Premiere Elements project - or is it intermittent?
You happen to have Windows 7 64-bit OS? It could be an incompatible driver.
In the meantime, go to Windows Update manually and make sure you have even non-critical updates.
Go to http://www.realtek.com/downloads/ and make sure to have the latest drivers audio, if appropriate for your system.
What kind of camcorder also has your video come from? Make sure your Premiere Elements project is set up for the video from this camcorder?
There is a red line above your clips on the timeline? If Yes, press ENTER to display the timeline.
-
Since I did the update of El Capitan I have no sound, the icon shows the sound is muted, but it does not get the sound.
Try resetting the SMC.
Reset the management system (SCM) controller on your Mac - Apple Support
-
LPX 10.2.2: I'm doing a piece with 6 midi tracks.
The editor only displays the Track5 any track I've highlighted. Cannot change other tracks.
Can anyone help? Thank you.
You select the track header, or you by selecting the region in this way you should be?
-
Hi so I have had this problem for about 2 weeks now and I need help. So what is happening is when once cut-scene after 5 seconds cuts sound out for everything I have at the time (usually just the game) and to get back I have to turn off and then turn on my helmet, then the noise will return then I return to my game and continue the cut scene and then 5 seconds later the sound cuts again. I would really find a fix for what I searched online for the last week 2 trying to find something useful, but unfortunately not and I tried a lot of things already that I saw all the other posts that I could find online and patches, they found did not work for me. and it is only when a cut-scene plays a game not when I play the game or watch videos on YouTube or listen to music in the game cinematics
and here's my dxdiag
------------------
Information System
------------------
Time of this report: 02 28, 2015, 19:51:36
Computer name: TWINSHOT-PC
Operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150113) - 1808
Language: English (regional setting: English)
System manufacturer: power O.E.M.
System model: O.E.M. power
BIOS: BIOS Date: 21/08/14-12:08:10 worm: 05.06.05
Processor: Intel Core i7 - 5820K CPU @ 3.30 GHz (12 processors), ~3.3GHz
Memory: RAM 16384MB
Available OS memory: 16278MB RAM
Page file: 3669MB used, 28883 MB of available space
Windows Dir: C:\windows
DirectX version: DirectX 11
DX setup parameters: not found
DPI setting: Using System DPI
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7601.17514 32 bit Unicode------------
DxDiag Notes
------------
Display 1 tab: No problems found.
Sound tab 1: No problems found.
Input tab: no problems found.--------------------
DirectX Debug levels
--------------------
Direct3D: 0/4 (detail)
DirectDraw: 0/4 (detail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (detail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (detail)---------------
Display devices
---------------
Card name: AMD Radeon 200 Series R9
Manufacturer: Advanced Micro Devices, Inc.
Track type: processor AMD Radeon Graphics (0x67B1)
DAC type: DAC (400 MHz) internal
The device key: Enum\PCI\VEN_1002 & DEV_67B1 & SUBSYS_046E1043 & REV_00
Display memory: 4 095 MB
Dedicated memory: 3072 MB
Shared memory: 1023 MB
Current mode: 1680 x 1050 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor
Monitor model: ASUS VK222
Monitor ID: ACI22A5
Native mode: 1680 x 1050 (p) (59,852 Hz)
Output type: DVI
Driver name: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
The driver file version: 8.17.0010.1333 (English)
Driver version: 14.501.1003.0
DDI version: 11
: Model WDDM 1.1 driver
Driver attributes: Final retail
Format/driver Date: 21/11/2014-10:44:20, 1348928 bytes
Would be WHQL logo: Yes
Date stamp WHQL:
The instrument identifier: {D7B71EE2-24F1-11CF-C676-6424BEC2C535}
Vendor ID: 0 x 1002
Device ID: 0x67B1
SubSys ID: 0x046E1043
Revision ID: 0x0000
Driver of strong name:Please run a check of system files (SFC)All instructions are in our Wiki article below...
If you have any questions please ask us for . -
Its a cd of instructions, it allows to play with all the instruments or just the backing track
Start > Control Panel > Sound > playback > highlight speakers > properties > levels > balance
I hope this helps.
-
The sound icon is with muting and and clicking on it does not erase the 'secret' or display the volume bar. When calling up the HP Support Assistant, he States:
ATI High Definition Audio Device - active - Version AtiHdmi.sys of the 5.0.7000.4 driver
IDT High Definition Audio CODEC - Errorr (52) - stwrt64.sys Version 6.10.6276.0
Walker also clicking on the sound icon windows says that it dectects a problem, but does not offer a solution. I have a HP Pavilion dv6 running Windows 7. Anyone has any ideas please? Thank you.
Hello
Kathy1222 wrote:
As requested (even if the label is not quite identical to the photo - cell about 1 year old):
Product - VJ342EA #AB9
Model - dv6-020sa
Windows 7 64 bit
The sound was stopped abruptly, works fine, don't know when, but I've always done the updates from HP, when they have developed, so, if a file/driver has been corrupted then?
Try this driver. There are also versions available to the support page for your laptop. Look in the driver - Audio section.
Best regards
ERICO
Maybe you are looking for
-
How to remove ads by mgid from my Pro iPad an iphone 6
-
Replacing the drive HARD on Satellite C series
Hello I want to replace and upgrade my hard drive internal sata, what is the maximum size that I can install which will fortunately be recognized by BIOS / chipset?
-
ENVY 14 Sleekbook - 14-k074ca: cannot find wireless networks after Windows update 10
Hello I have problems connecting to networks wireless on my HP ENVY 14 Sleekbook (14K074ca) TS. Networks are available, as I am able to connect via my phone and other PCs. I tried the network troubleshooting and it failed. I've updated the network wi
-
Can not view videos in Windows Photo Gallery
Hello In Windows Photo Gallery, I can see my photos very well; but when I try to select a video for viewing, I get a message that it has stopped working. Thanks in advance! Error details are as follows: Signature of the problem: Problem event name: A
-
Windows Setup could not configure windows to run on hardware__ this computer
I try to install vista on my computer but I get this error. My installation process has not been smooth so far! What happens is that when I install vista (from usb) it restarts the first time, then it displays the message "vista starts for the first