His editing plays is not in the new CS5/s

Hi people,

I use first Pro CS5

For the first time what works on a new project all the clips during the preview in the source monitor's search and his works.

When any clip/s are done sliding on a timeline, they do not play the sound even if the audio monitor shows his is crossing.

The video clip both its sound appear on the timeline.

I tried setting up of several new projects, and the same thing happens.

Hardware audio settings see the default 'First Pro WDM Sound' and 'ASIO Setting. "

If I import the music again the same problem occurs.

All audio tracks are set for stereo, and there is no mono soundtracks.

I checked the previous projects and the sound works on timelines and parameters of audio material is identical.

Any suggestions on how to fix would be greatly appreciated.

Barry

1 waveform is in the timeline

2. the sound is not muted in the timeline

It is strange that the sound plays all the clips in the source Panel but not on the timeline in all new project.

Also sound on any project previous plays on time lines so I was wondering if a reboot will sort problem.

In any case, I rebooted the computer and erased the media cache as suggested. I also copied clips folder in a new folder and re-imported a few clips of test and they all work very well.

I tried to use original excerpts in the new timeline (not those reimported) and they also work very well.  All the clips in the original timeline will play without sound still the timeline looks identical in all ways and settings.  As it is strange.

Welcomes any other suggestions or thoughts on what is the problem with the timeline would be interesting.

In any case very well thank you anyway for the quick response.

Tags: Premiere

Similar Questions

  • I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, it goes well until the installation of the updates, but installation ends, it displays error windows could not update

    I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer.  not installing and it rolls supports everything. Please help me solve this problem

    original title: windows 7 gamer edition

    Download of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.

    Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.

    You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.

    Resources:
    The Dangers of the purchase or use of software pirates - Notebooks.com

  • The green arrows front and rear under file and Edition disappeared after I downloaded the new Firefox toolbar. How to recover?

    The green arrows to page forward or backward at the top left under the file and edit disappeared after I downloaded the new toolbar for Firefox (for 3.6) and was replaced by the most visited, getting started and last new icons, which I have little use for. How to bring back the original toolbar?

    If the Navigation toolbar is not be displayed? See below.

    Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
    Turn on/off the menu bar is a new feature in version 3.6.
    (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
    Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M then release the key
    Windows method 2 Press the F10 key, while the Menu bar, choose "view > toolbars", click on 'Menu Bar' so that a check mark next to the Menu bar
    Method Windows 3 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar as well as a checkbox is placed next to Menu bar
    The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
    See:

    http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    

    http://KB.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
    Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
    To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
    Mode full screen
    http://KB.mozillazine.org/netbooks#Full_screen

    See also:
    Back and front toolbar buttons or others are missing
    Customize controls, buttons, and Firefox toolbars
    How to customize the toolbar

  • where is playing strong option on the new drive to download?

    Where is playing strong option on the new drive to download?

    Hello

    You get this option under the edit in the new MS Reader tab.

    Launch the CD player > go to Edit > read aloud.

    Concerning

    Sukrit diallo

  • I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

    I download the latest version of Firefox, but when I go to sign up for google + it tells me that my browser is no longer supported. I tried uninstalling and everything, but can not get the new version appears. Any Suggestions?

    Please see that.

  • Firefox 4 beta1 does not show the new user interface

    Firefox 4 beta1 does not show the new UI (not Firefox Button on the left). It is exactly the same as FF 3.6.8 under the tabs on the top function. Also, if I disable the menu bar, UI GET screwed up

    This has happened

    Each time Firefox opened

    Nevermind, I fixed it.
    It seems that, for some reason, the default theme has been disabled (?) for the installation of 4 FF, and everything looked weird and wise as I mentioned in the original post.
    On a side note, next to the default theme, once I activated, it reads "not compatible with FF4.

  • Can not install the new update

    Hi, I use windows 8.1.

    My Skype cannot be used at present. Pop message 'the old Skype 7.8 version can not be delete' while I install the new version by the message on Skype application.

    I got through all the files and make sure you all relate file has been remove. But I can not install the new version. How can I update the window to desktop?

    Thank you

    Run the following program to remove traces of Skype from your system, which should allow you to reinstall the program:

    http://www.pcdust.com/downloads/SRT/SRT.exe

  • HP Pavilion 15-ak120nb: HP does not accept the new ssd m.2 500 GB samsung 850 evo - M.2 500 GB ssd

    HelloW,

    I have a note book HP Pavilion 15-ak120nb QWERTY with a boot SSD disk original: Samsung MZNLF 128 HC HP - 000 H 1 of type m2. and it's more complete al. I bought an also a samsung Samsung 850 m2 of EVO - 500 GB SSD type. Once it has been installed the laptop did not recognize the new boot disk? It is not vissible in the BIOS. How can I solved this problem please? I post a picture of my new 500 GB of disk ssd. Someone at - it a step by step explanation how to do the replacement?

    I don't know anything about computers

    Ah. I was poorly expressed.

    Go with SHIFT + X as he suggested.

  • Windows 7 Media Center will not download the new guide listings

    Hello

    I am really frustrated. WMC will not download the new guide listings and I tried all the patches that are supposed to be that I found in this forum. I also tried the system restore, which did not fix the problem. Obviously the problem is not affected by the restore program.

    I was able to determine that there is some kind of corruption of the WMC files that Windows 7 can not solve (according to the event log).

    I'm a bit exasperated at the tenacity of this problem. Y at - it a reliable fix or I need to reinstall Windows 7?

    Thank you

    Hello Long777,

    You have the update for Windows Media Center installed?

    Click on the article below:
    KB Article ID: 2284742 -October 2010 Cumulative Update for Windows Media Center in Windows 7

    You may be able to force a manual update. Do an update (weekly) to TV Guide through the menu system.

    If this does not help, you might want to ask your specific question to http://.www.thegreenbutton.com \forums

    I hope this helps.

    Thank you

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

    I just downloaded a version of EVALUATION of MapPoint 2013 demographic details resemble MapPoint 2007... the trial version not have the new data from the 2010 Census?

    Hello

    The question you have posted is related to Microsoft MapPoint and would be best suited to:

    Technical support of Microsoft MapPoint

    http://www.Microsoft.com/MapPoint/en-us/support.aspx

    Support for MapPoint, streets & trips and Highway

    http://support.Microsoft.com/ph/851

  • Epson sx438w does not recognize the new ink cartridge

    Epson sx438w does not recognize the new ink cartridge, when change original are

    Contact Epson.  This isn't a problem of Windows or Microsoft.  They should be able to help or offer troubleshooting instructions.

  • I do not have the new GUI Windows Update for Vista

    My friends computer which has Vista: Home Premium SP1 has the new graphical interface of Windows Update.  I have Vista: Home Premium SP2, how do I do not have the new GUI interface?

    -Mike

    :

    Hi Gamemaster406,

    Welcome to Microsoft Windows Vista Forums.

    Until we start trying to solve your problem, please provide additional information, so that we can better help you. Please, give us a brief description of your problem with the computer.

    O how long you have been faced with this problem?

    O that you make changes to the computer recently?

    O are not able to see the latest version of windows you updates?

    Ø you aren't able to see the windows graphical user interface update settings?

    Each computer is different and you could look at the history of the update between the two computers and see if you are missing the other windows updates.

    To learn more information access Windows Update the link below:

    http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    Hope this information is useful.

    Suresh G

    Support Microsoft Answers

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

    I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

    I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

  • I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer. How to replace this command?

    Silverlight.config.exe. appears again msg then causes a gel

    I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer.  How to replace this command?

    Hi JaphetMorales.

    (1) did you change on your computer before this problem?

    (2) what operating system is installed on your computer?

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    You can uninstall and reinstall Silverlight and then check.

    http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

    See also:

    http://support.Microsoft.com/kb/977116

  • C4385 does not recognize the new router

    Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

    When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

    I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

    Please, try the following:

    1. disconnect the USB cable from your printer

    2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

    3. restart your PC

    4. under the printers screen, enter the following print server properties screen:

    XP: File > print server properties

    Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

    Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

    On the Ports tab, be sure to remove any existing TCP/IP port.

    5. remove temporarily disable your firewall software

    6. start the installation and select reconfigure the network connection / add a device.

Maybe you are looking for