HP Pavilion 15-ak120nb: HP does not accept the new ssd m.2 500 GB samsung 850 evo - M.2 500 GB ssd
HelloW,
I have a note book HP Pavilion 15-ak120nb QWERTY with a boot SSD disk original: Samsung MZNLF 128 HC HP - 000 H 1 of type m2. and it's more complete al. I bought an also a samsung Samsung 850 m2 of EVO - 500 GB SSD type. Once it has been installed the laptop did not recognize the new boot disk? It is not vissible in the BIOS. How can I solved this problem please? I post a picture of my new 500 GB of disk ssd. Someone at - it a step by step explanation how to do the replacement?
Ah. I was poorly expressed.
Go with SHIFT + X as he suggested.
Tags: Notebooks
Similar Questions
-
OfficeJet Pro 8500 does not accept the new cartridge
My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,
No problem, I understand.
I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options
http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838
With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.
More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.
Best.
-
Good afternoon. I bought a creative cloud subscription (one year) with a virtual prepaid credit card. I remembered renew two days later, but Adobe does not accept the new card. I don't know what I'm doing. Help me please
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
I deleted my iPhone by mistake. I want to restore it but it does not accept any ID code I give. help please
-
iPad does not accept the new password for the new internet provider
Installed new Internet link service - century. IPad will not accept the password written on the modem. How can I connect to wi - fi with this situation?
Can you connect to the Wi - Fi connection with another? The problem may be with the password. Read this article: If you need help with your Wi-Fi - Support Apple password
-
Satellite M50-A-110 does not recognize the new SSD?
Hello
I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.
They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.
Someone knows how to solve this mess?
Toshiba has a BIOS beta I could try?
Any other ideas would be welcome.As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.
Hello
I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.
I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.
I would recommend to check the SSD for the firmware update!
-
Printer does not accept the new ink cartridges Hp cartridge is missing or damaged.
Cannot print anything in black ink. Tried everything. really need help with this one
Resolved solution printer worked after being off all night
-
IPhone does not accept the code to check for text messages
II phone does not accept the code verification for the transfer of messages text imac
Maybe these articles will help:
Get a verification code and connect with authentication to two factors - Apple Support
If you don't receive your check or reset email - Apple Support
If this is not the case, can you explain a little more detail what exactly is your problem? Or see the 'Contact us' at the bottom of the second article.
-
Re: Failed on nine L510 Vista admin password - does not accept the admin pass
Hi all
Completely baffled by this one so would appreciate any advice.
I just bought a new Satellite L510 with vista hard disk installation.
I went through the installation process long and eventually got to the point where I could configure my admin account and the name of my computer.
I chose the name of my admin account and typed in the password and confirm the password and named my computer.
Now when I get to the initial Vista logon screen, it does not accept the password I am entered (and confirmed).
This can be a problem with caps lock, as the password was all numbers.
(the password was all numbers and five numbers)
It, however, gives the correct indication for the password that I entered. It does not accept the password.
I would be happy even just redo the installation process, but I have no idea how to do this, because I can't even a quick command-line anywhere.
Help, please!
It's strange. You can log on using a different user name?
In any case to run recovery, you either:
* Press and hold zero during the power upward
* Press F8 before Windows starts to enter the Windows Start Menu, then run recovery of the option "repair your computer". http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm -
Money Plus Deluxe does not accept the product key
I bought a new computer - I have Money Plus Deluxe on my old computer. I installed the software on my new computer, but it does not accept the product key. How to operate?
Moved from the community involvement Center
Original title: Money Plus Deluxe
Hello
Ask in the silver Forum
https://social.Microsoft.com/forums/en-us/home?Forum=money
Don
-
update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update
Hey lasdj,
Thanks for posting in the Microsoft answers site!
If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.
To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.
Therefore, remove the compression of the DATA directory and run together to the top again.
Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.
See the links below for more details:
Windows Update error 6d9e
http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9EInstall SQL Server 2005 and 2008 failures (compressed DATA directory)
http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspxI hope this helps!
Gokul T - Microsoft Support -
My computer does not accept the print command.
My computer does not accept the print command. He always questions me to save a file, I don't want to save a file. How can I change this?
Sherimcfalls,
1. what operating system is installed on the computer?
2. the problem occurs with any particular application?Method 1
I suggest you try the steps from the following link:Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsMethod 2
Try to set the default printer.Change your default printer
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer -
Flight Simulator FS9.cfg file does not accept the changes
I am running Msft FltSim2004 under Windows 7 Professional. I had to make additions to the FS9.cfg file (it takes changes in txt in Notepad). It is a hidden file located in C:\Users\{my name} \AppData\Roaming\Microsoft\FS9. After that I have to make the changes and close the file, and restart FltSim, I still get the error that the change was supposed to eliminate FltSim. When I check FS9.cfg, the change I've made is no longer there.
I changed all the c:\ folder permissions down to FS9, as well as the permissions in the FS9.cfg file. But it still does not accept the changes. Everything else works fine under Win7. Any suggestions? Thanks in advance for your help.
Art
Art,
Try to copy the file to your desktop (or another folder), and then delete one located in the FS9 folder. Make the changes to the copied file and simply save it to the new location. Reopen the case to check the changes remained, and then copy it in the FS9 folder and test. Let us know the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error in partition Acer Iconia B1 does not accept the update.
My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops
ERROR:-invalid partition setting
17: 238e8000:888e8000 of fat
Instalation aborted.The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
Can you help me?A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.
Iconia B1 - A71, install the USB 2.0 driver - video tutorial
Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial
Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial
-
Windows XP Pro SP2 re - install does not accept the product key.
I'm trying to re - use the product key on the sticker from the bottom of the laptop. This is the same computer that was working fine until I decided to reinstall, but I use a different installation media because the laptop (a refurb) never came with the media. Can I call MS and get it re-authorized? I have XP Pro SP2 and XP Pro SP3 Reacondicionador media.
You try to install Windows XP with OEM product key you have on your COA sticker. So be sure that you have a generic Windows XP OEM CD, because VLK or Retail CD does not accept the OEM product key.
Maybe you are looking for
-
Satellite A350 - Wireless does not work
Hi, I have a Satellite A350 under Vista 64 I have a problem with my wireless light and functional (next to the power switch) doesn't turn only not on, even if the switch is on. I had this happen repeatedly and it easily fixed with FN + F8. Though, no
-
HP mini 110 computer - request password
HP mini 110 running winXP suddenly asking for current password giving Fatal Error CNU92636M9 Why he did this and what is the password to enter the system. Thank you.
-
I have a computer running windows vista that Ive had on the line running on the line with professional Xp but it seems that I can't find a compatible driver for the audio device. Ant suggestions? The Pc has a legacy, it's a Compaq laptop
-
I have a desktop monitor and an Alienware Alpha I bought recently, which of course is not a speaker. I use a HDMI cable to get the video of the Alpha on the screen, but when I plug the HDMI on my monitor I can not any audio to the fate of the compute
-
Help to change the code on the Admin, when you don't have the code.
MY WIFE LEFT FOR ANOTHER MAN, OUR ONLY PC THAT I BOUGHT AND HAVE STILL IT WAS PUT AS AN ADMINISTRATOR AND IT DON'T ME NOT GIVE THE CODE, I CAN'T USE IT FOR MORE THAN THE BASIC FUNCTIONS. CHILDREN AND I WOULD LIKE TO USE WISELY IS THERE WAY ROUND THIS