his mini Duet of Dell does not work

I replaced a faulty hard drive, therefore completely reinstalled windows.

The sound plays for a fraction of a second and stops. If you keep hitting the mute button, you can make out the currently playing song. You want to go, as the pilot turned off just a click.

I downloaded and installed all the updates area of dell support. The inventory number is theNOTE from the ADMIN: maintain the label removed by privacy policy >, its an Atom 1.5.

I was on the realtek website and downloaded the drivers here for ac97 codec etc but installation blocks and guard repeatedly said windows cannot verify this driver you want to continue.

The only notification I receive in the bluetooth radio device manager - it of the latest driver but says its stopped because it reported problems.

I had read in another thread that uninstall conexant hd audio driver and restart reolved this. Didn't eork... Also the chipset drivers must be installed before the network and sound? I tried this and automatically disabled the windows driver installation. I'm Manager of indevice and uninstalled all devces sound and video and then restart and it points to the dell downloads folder, exactly the same problem.

Any help is welcome.

mlemin
I was on the realtek website and downloaded the drivers here for ac97 codec

Hello. AC97 codecs were on the computer how far in 2005 about motherboards. Then, after all motherboards have the HD audio codecs, so for all modern computers get the drivers HD audio, not AC97. The model Inspiron Mini Duo 1090 also Conexant Audio, not have Realtek.

The only operating system that supports Dell on the Inspiron Mini Duo 1090 is Windows 7 32 bit.

If you install the audio driver Conexant does not help, and then switch to the native Windows audio driver.

1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
2. develop the 'audio controllers, video & game' and right click on "Conexant High Definition Audio.
3 Select this option to "Update driver software".
4. click on "Browse my computer for driver software".
5. click on "Let Me pick from a list of drivers on my computer".
6. put the "Show compatible hardware" check box if not already checked.
7. in the list of devices, click on 'High Definition Audio"(native driver).
8. click on "next".
9. in the update driver warning box, click 'Yes' (the driver).
10 restart the portable computer if you are prompted. If not invited, so no need to restart.
[To return to the Conexant driver, do it again but reverse steps 2-7 names].

If you get the same problem with the native audio driver then it is probably a hardware failure. Open the computer and a cable loose speaker connection. If the re-allocation of places the connection does not help then replace the speakers. The Inspiron Mini Duo 1090 repair is available if you need it.

Tags: Dell Laptop

Similar Questions

  • Shift + del does not work in Windows 7 SP1

    My shift + del key does not work when I try to remove something permanently, but when I am pressing on delete only the key to his work. How to fix?

    Hi Billy,

    Normally, when you delete files that they are sent to the Recycle Bin and so always take disk space hard until you clear. Now, if you press shift + delete button does not work, then I suggest you follow the response of Syed N on this wire.

    Let us know if you need more assistance.

  • CTRL Alt Del does not work Windows 2015 10 rMBP

    Hi all

    I have a MacBook Pro for Windows 10 15 "Bootcamped retina.

    CTRL Alt Del does not, any more than the function keys (brightness, mute, etc.).

    I tried to manually reinstall the keyboard driver. It installs ok but does not solve the problem.

    On Reddit, a user suggested that another user with the same problem should do a Bootcamp driver repair.

    However, when I go in the Bootcamp Assistant I get only the possibility to restore the volume.

    My best guess is that the Bootcamp Driver repair fix it if I could access.

    Does not mention that this is the model of 2015.

  • Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

    Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

    Hello

    The setting should be as below, and not only the port number should be...

    PORT 7809

    Kind regards

    Veera

  • Mini SDHC 4 GB does not work.

    Hello

    I recently bought a Toshiba 4 GB Mini SDHC Card.
    I connected to a computer and tried to copy files on.

    Unfortunately, the computer said that a form any error had occurred. I tried to format the card, but the computer said that the format was incomplete.
    Now whenever I connect the SD card to the computer, the computer does not know what do with it and right click on the "removable storage" in Explorer causes my computer to hang.

    I tried on several different computers, but it seems to be the same problem. I tried with another SD card, with the player, and it works fine, so is certainly not for lack of drive.

    I downloaded the fix XP for SDHC.
    But the problem is still there; and I also tried several third party formatting modules, but every time I insert the SD card in question, all seem to be suspended as well.

    So if anyone knows what to do with the card, it would be much appreciated, thank you.

    Hello

    SDHC card is not the same as the SD card and not all readers of internal cards supports SDHC cards.
    Are you sure that your drive supports the size of 4 GB and SDHC cards?
    You should first check this.

    However, in my view, that the Explorer cannot handle the SDHC card because of the incomplete formatting process
    If the card has been incorrectly formatted, then it of not readable and unusable

  • vosto del does not work with the printer hp laserjet 1018

    Dell Vosto will not work with HP LaserJet 1018, work group, that don't know what that means.

    Unfortunately, this community is able to provide support in English only. The following URL will help ensure that you receive support appropriate for your location information. Select your region from the drop-down list, and then click the arrow button.
     
    Have a great day and thank you for your visit.

  • Satellite C650-17Z - keys FN and Ctrl-Alt-Del does not work

    I recently bought a Satellite C650-17Z and the function key and the Ctrl-Alt-Del key combination ceased to operate. Is there a solution to this all - I got older laptops from Toshiba is a driver issue, but I can't find the drivers for specific keyboard on the Toshiba site.

    Could someone enlighten me, please?

    Hello

    Regards the FN keys will find it many other topics in the forum.
    Did you find them? Is there a solution for you?

    In any case, you must reinstall the package of added value and utility to Support Flash Cards because both controls the FN keys. You can download all the tools on the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    But for the Al-Ctrl-Del combination, there is no special driver but maybe it can be solved with these tools...

  • Windows Vista Home Premium does not start when I turn on the computer. Ctrl alt del does not work

    Windows Vista premium edition hung up in judgment and now I can't get windows to boot at all.  I just get a blue screen that says Windows Vista.  What should do?

    Hello

    You are able to access the menu start pressing F8 as soon as the initial POST ends and before Windows starts to load? If so, try the last known good configuration. Otherwise, follow the steps here to load the recovery environment: http://support.microsoft.com/kb/927525 and then run rstrui.exe to load the system restore. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • Fingerprint reader does not work after the laptop awakens from his sleep.

    Pavilion DV6-6c15nr

    Windows 7 Home Premium

    Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

    Hello

    Uninstall the software and current driver for the fingerprint reader.

    Resources:
    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here.

    Download and install the latest version of the software from here.

  • Satellite 1900-803: Hi-Speed USB 2.0 card does not work

    I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

    the map shows that it runs on any 32-bit location.

    I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

    Help, please.

    I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

    Post edited by: wes0702

    Hello

    Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

    Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
    If the card supports 32-bit so you should use the 16-bit option.

    I think you should play a little with this option and possibly that the card will work.

  • T410 CTRL key does not work after update BIOS to 1.45 (German keyboard)

    Dear community,

    I updated the BIOS of my TP T410 (2522), German keyboard, to 1.45. After the update, both CTRL keys don't work anymore. Ditto for the AltGr key. When I switch to CTRL FN in the FN key BIOS - as supposed - works like the CTRL key. But when I turn off again the FN returns to his good funtion and CTRL does not work.

    When I connect an external keyboard via USB it works perfectly.

    Any suggestions how get the CTRL key works again?

    Best regards, Simon

    Hello

    turns out be a hardware fault. Swapped keyboard and it works again.

  • Ctrl-alt-del does not not to connect even in windows xp safe mode

    I use a laptop Toshiba with windows xp, when I turn on the computer and the logon window lights to use fingerprint recognition or press ctrl-alt-del to log on, we have not configured footprint so always supported the ctrl-alt-delete and then password screen lights up.  Now I can't before the logon window by pressing ctrl-alt-delete.  It doesn't do anything.  I tried in safe mode, but also need to log in safe mode and ctrl-alt-del does not work in SafeMode either.  Have tried pressing Ctrl-alt-delete twice and much more, still nothing.  Have you tried ctrl-shift-esc Ctrl-alt-del before and no luck.  Thank you!

    Hello

    I suggest you to start the computer by using the last known good configuration feature and check if it helps:

    http://support.Microsoft.com/kb/307852

    It will be useful.

  • Cannot add co-owner for my project? The button does not work.

    Hello

    It seems that something is wrong with the button "+ co-coproprietaire/credit", when I press nothing happens. Also I asked a friend to check his profile and he too does not work.

    Thank you.

    Hello - please write to our official support to help.behance.net - I think that it is a known, but it is to be resolved as soon as POSSIBLE.

  • Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

    I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

    Could you please include screenshots of the so-called issue?

  • A 'Powered USB Port' does not work on Mac Mini

    I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

    This specific USB 3 hub? Not all work with the Mini

    Hub USB 3.0, attached to a Mac Mini does not work

    Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

Maybe you are looking for

  • AppleScript file trigger

    Hi, I am creating an automation of service where a file is transmitted in an applescript script. However, I am fighting to get applescript to pronounce on the file. I think that I've defined a variable evil or something. I think I need to change the

  • How to measure my each operating time blocks

    Hi, guys I will measure my each main blocks, duration, are totally five large blocks in my final VI, the last four of them were in a while loop Thank you

  • buffer problem

    Hello, I am REALLY new to labview and probably a beginner programming all together. I have a problem that is probably already answered, but I don't know yet what to look for. My problem: I'm getting data from an instrument once per second, and I read

  • execution for FPGA parallel code problem

    Hello I have a problem with the execution of the code in parallel on the FPGA to a cRIO-9073.Running the code takes more time than expected.The problem is described in the attached PDF file. Kind regards Beurms Jasper

  • Windows XP license & reformat

    My computer got a virus attack, after execution of 'unhide.exe', many issues are still "empty".  for example the folder empty system - so 'disk cleanup' & 'Defrag' tools are not available.  And do not know what other services of Win XP is no longer a