execution for FPGA parallel code problem

Similar Questions

• FPGA reference questions between the station development and execution? 63195 error code

  I will do my best to describe the problem, I was see.  Note, I tried a few other messages that kind of touch on my problems, but they never seem to have a definitive solution.

  Background-

  I have 3 screws:

  VI 1) opens / runs the bitfile FPGA reference and stores the reference to a global file so that I can call the reference of other screws I need to do this as opposed to the opening of a new reference because I use the FPGA for digital communications and it adds about 100 ms to to open a new reference whenever I need to read/write in the target FPGA to host (100 ms are long in the) digital world!).  Some people use Shift Registers.  I finally called my whole army FPGA screws of TestStand to run a test automated, so it was easier to break up of my functions for open/close/read/write.

  VI 2) called the global reference of the file for FPGA, then going to a read/write node to change the settings of the target, then passes the reference out of the node back to the global reference of the file read/writable

  VI 3) calls close reference FPGA and the function is passed the global reference of the file.

  Question-

  I understand not why this method works fine when I run either of TestStand with station options defined for the development (not running) mode or when I open VI which calls these 3 screws individually in sequential order but IS NOT working when I try to run these screws individually (Run VI 1 - open-> write Ref to the global reference of the file-> Run VI 2 - read global file reference-> playback control function / writing-> error-63195) or when I have run in the same sequence TestStand but together with station for execution options.  Maybe I need to change the TestStand sequence to load all the modules at startup?

  Why the reference becomes lost when global failover between development and execution and why labview cannot drop keep the reference stored?  Is there a work around?

  Finally found a solution.  I do not understand why it is necessary during the reading of the FPGA and not what writing (in fact I do not understand why it worked at all) but I ended up changing the properties of the step in my TestStand sequence for the step calling my DTL_READ.vi to be properties-> Run Options-> Unload Option-> "Unload after executing the step.  That seemed to do the trick to get my test TestStand sequence to work in runtime.

  I still don't understand why this was not required when you run the same sequence in the design environment and why it is not when I call my DTL_WRITE.vi.

  The DTL_READ.vi and the DTL_WRITE.vi pass the parameter labveiw global.vi 'Reference FPGA VI"of a node in read/write.  I don't know if the root of the problem is in my host TestStand and LabView FPGA VI...

  Thanks for all suggestions from you guys!  I'm happy I work but I am still confused by the solution.

• If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

  I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding
  
  Windows can't check for updates, error code 800FFFF.

  I tried some of the recommendations varied on this site, but so far without success.

  If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

  I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

  I checked for malware and repeatedly tried to system update readiness tool.

  Any thoughts?

  Some information on my system:

  OS: Vista Edition Home Premium
  Version: 6.0.6002 Service Pack 2 Build 6002
  Model: Inspiron 1525
  System type: X 86-based PC
  Processor: Intel Core 2 DUO CPU
  The version of the BIOS/date: Dell Inc. A16, 16/10/2008
  SMBIOS Version 2.4

  Hello Jason.

  I suggest you try the following:
   
  close and exit all the open documents or windows program you have open.
   
  Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
  [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
   
  Note => for best results, check the option to remove personal settings.
   
  NEXT
  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
   
  1B. make disappear/close the pop-up window "automated troubleshooting! -then...
   
  c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

  2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
  When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
   
  If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
  Those that are marked as "optional" decline.
   
  Have infinite patience so that it scans and it's work.
   
  When you are prompted to restart Windows, please do. Allow it to restart.

  If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

  Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• Problems installing drivers for printer EPSON L110. Error message "Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.»

  Original title: trouble installing the drivers for my printer.

  Hello

  I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.

  Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.

  I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.

  TKS

  Gerard

  Hi, Germain,.

  This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.

  http://www.Epson.co.in/epson_india/ink_tank_system_printers/product.page?product_name=Epson_L110&tab_index=4

  See the articles for more information.

  Install a printer

  Find and install printer drivers in Windows 7

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• appropriate using index for the execution of the parallel statement

  Hi all
  
  I created indexes for my table
  

  CREATE INDEX ZOO.rep184_med_arcdate ON ZOO.rep184_mediate(arcdate);

  That was before I started thinking about the execution of the parallel statement. As far as I've heard I need to change my correct use with parallel hint index. Could you please suggest the way forward?

  Marco wrote:
  Hi all

  I created indexes for my table

  CREATE INDEX ZOO.rep184_med_arcdate ON ZOO.rep184_mediate(arcdate);
  

  That was before I started thinking about the execution of the parallel statement. As far as I've heard I need to change my correct use with parallel hint index. Could you please suggest the way forward?

  When all else fails, read the Fine

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17118/sql_elements006.htm#autoId63

• How to implement point filters fixed for FPGA

  Hello!

  I am applying the bandpass filter Butterworth for FPGA.

  I managed to develop filters of fixed point that suits my needs, but I don't know how to implement on a table in a project after the FPGA code generation. I tried to understand it in the examples, but I was not very successful.

  My time to finish what runs, any help would be really appreciated...

  Any suggestions?... some examples?

  Thanks in advance

  I've already done that and solved the problem.

  In any case thank you and have a nice day

  Ljubica

• need of support code for the challenge code

  need of support code for the challenge code

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Seems there is no way to contact Adobe for a support code, re: Illustrator

  Does anyone know how it is possible to contact Adobe for the support code in order to install Illustrator? Thank you.

  Joseph,

  Creative cloud support (all creative cloud customer service problems, chat open from 05:00 to 19: 00 PST/PDT weekdays)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  Serial number and activation support (non - CC, chat open between 05:00 and 19: 00 PST/PDT weekdays)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Adobe ID and registration support (non - CC, chat open between 05:00 and 19: 00 PST/PDT weekdays)

  http://helpx.Adobe.com/x-productkb/global/service-C1.html

• Download for the CF file problems

  Hello, I hope someone here will have an answer to this. I'm having a problem getting two images to upload to the server. The first image will always be mailed, but the other does not. The entry put in the database for the two paths of the image, but I can't understand why the second will not download. I enclose the code.
  
  
  Thanks in advance for any help.
  
  Weston

  For some reason, I never thought to check the permissions on the folders. For anyone having this problem later, double check your permissions of folder on the server. I did have no write permission set so once I changed those he loaded the file.

• Case: View the balance of the average customer for each area code.

  Hi again together. As a C++ / VB programmer, I used by using a control specified structures like for loops and while loops and use predefined variables to solve my problems. I have a little trouble to adapt to the SQL paradigm, which really does contain a few key words and in built functions.
  
  I had to have some exercises to do by my tutor at the University, and I have a big enough problem with this one. I to recover the balance of the average customer of a 'customer' entity, but I have to do for each area code, not as a whole. When I look at this problem, I immediately think of loops, conditional check, a variable of integer type to control the loop and possibly a table or a vector data type to store the results. SQL is rather simple, and its simplicity is actually causing me problems, ironically.
  
  Here is the "Customer" entity which I am to get directions:
  

  CREATE TABLE CUSTOMER 
  (
              CUS_CODE            NUMERIC(6) 
              CONSTRAINT CUSTOMER_PK PRIMARY KEY,
              CUS_LNAME       varchar(15) NOT NULL,
              CUS_FNAME       varchar(15) NOT NULL,
              CUS_INITIAL     CHAR(1),
              CUS_AREACODE      VARCHAR(3) DEFAULT '02' NOT NULL CHECK(CUS_AREACODE IN ('03','07','08')),
              CUS_PHONE       VARCHAR(8) NOT NULL, 
              CUS_BALANCE     NUMERIC(9,2) DEFAULT 0.00
  );

  I was able to order the customer balances by their area code and to calculate the balances of customers on average as a whole, but as I said I had difficulties to calculate an average of customer balances exactly their area code and do it for all the codes present.
  
  Any help / example code would be much appreciated.

  OK, so you will understand how to get the average on all clients in SQL, not true? Something like

  SELECT AVG(cus_balance) avg_balance
    FROM customer
  

  If you want to get the average balance by another column, you simply group this column, i.e.

  SELECT cus_areacode, AVG(cus_balance) avg_balance
    FROM customer
   GROUP BY cus_areacode
  

  This essentially tells Oracle to group all data by area code before you run the aggregate function AVG on the cus_balance for each of these groups.

  Justin

• verification for icloud Keychain code troubleshoot

  verification for icloud Keychain code is sent by SMS to the phone number. Help me I can not access this issue because I have a new mobile phone number. My apple account has already changed with my new cell phone number, but the icloud Keychain verification code is always sent to my old cell phone rather than my new number. Please tell me what to do step by step because I'm still a noob

  If you cannot access a device with iCloud active Keychain, you can complete Setup by resetting iCloud Keychain on the device:

  iOS:

  1. In iOS 8, tap Settings > iCloud > Keyring > advanced. In iOS 7, tap Settings > iCloud > keychain.
  2. Tap approve with Security Code.
  3. When asked to enter your iCloud Security Code, type Code forgotten.
  4. Press Reset iCloud keychain to replace your iCloud Keychain in the cloud with iCloud on your device keychain items.
  5. Press Reset to confirm. You will be asked to create a new cryptogram iCloud.

• find bios password for hp pavillion code # 68459741 dm4

  find bios password for hp pavillion code # 68459741 dm4

  Hello

  Try to enter: 77531387

  Kind regards

  DP - K

• How to get the date of deployment for the RT code?

  I'm using LabVIEW 8.5 and MAX 4.4.1f0 and cFP-2110. I want back the date of the deployment. Is it possible to recover the date of deployment for the RT code?

  Thank you

  Martine

  Hi John,.

  You must be able to FTP into your PSC 2110 from a Windows Explorer window and check the date of 'Change' of the startup.rtexe/or-rt/startup folder.

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav