History of Windows Update and point - GONE of restore system.

Similar Questions

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I use Windows Vista Home Premium 32 - bit SP2. Is there a way to delete records of only updates of failed or cancelled in the history of Windows Update?

  I use Windows Vista Home Premium 32 - bit SP2.

  Is there a way to delete the records of 'detail' of only updates of failure or cancelled in the history of Windows Update?

  I just installed hotfix for Windows (KB947821).

  It looks like a lot of my earlier 'failed' and 'Cancelled' updates are automatically updated and installed, and successfully, I might add.

  Some dates in some records do not seem much sense. I guess I'm looking for a way to select the records, I want to get rid of.

  Help?

  Hi Jeffrey,.

  It's not really a taken way in charge to remove only the cancelled or failed updates. These are taken from windows logs and displayed in the history. Steps that Jose post is a way to remove all files in history and will remove all updates as well as a failed/cancelled updates successfully.

• Have a Windows update and my screens are all screwed up now, Please HELP!

  I am running Vista Home Basic and day before yesterday when I rebooted my computer, a Windows update itself installed. He said he was installing 1 of 1 files. I knew the idea of what the update was for, but when I brought my system to the top of the screen and all open windows, including web screens are all strange and almost hourglass like? I tried to restore my system to three times, tried to adjust resolutions and even settings on my old monitor and nothing works. It also seems that all icons and things are a little bit bigger and I don't see anything on the left and the right of my screen. Can someone help me? The only thing that seems normal is the password screen that appears when I turn on my computer before I get to my home page? Any ideas?

  Hi PVneedshelp,

  Welcome!

  I suggest that you try to system restore to the point before you install the update by using the Windows vista installation disc.
  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:
  1 put the installation disc in the disc drive, and then start the computer.
  2. press a key when you are prompted.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  3. Select a language, a time , and monetaryand a method of keyboard or input and then click Next.
  4. click on repair your computer 
  5. in the dialog box System Recovery Options, click the operating system you want to repair, and then click Next
  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created when the program or the driver has been installed.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  If the previous step fails, then I suggest that you uninstall the display adapter driver that is present on the computer and then install the latest driver for graphic map of the manufacturer's Web site and check if it works very well.

  You must be logged on as administrator to perform these steps.
  How to uninstall a computer device driver.
  1. open the Manager of devices by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the device you want to Update, and then double-click the nameof the device .
  3. click on the tab driver , then click Uninstall and follow the instructions.
  Once the uninstall is complete, restart the computer and then install the driver to view CAD that you downloaded from the website of computer manufacturer.

  Also suggest to run Windows updates and make sure that you install the availability.

  1. open Windows Update by clicking the Start button, all programsand then click Windows Update.
  2. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.
  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser

• Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible?

  Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible? Regds, 'a journey of a thousand miles begins with a first step."

  Code 0x800A01AE error and 0 x 080070570

  Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands and press ENTER after each command:

  net stop wuauserv
  net stop bits
  output
  Rename the Catroot2 folder.

  Note do not follow this step if you are using Microsoft Windows 2000.

  To rename the Catroot2 folder, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands and press ENTER after each command:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output
  Important do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  Rename the folder "C:\Windows\SoftwareDistribution":
  Click Start, click Run, type %any, and then click OK.
  Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
  Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 wuweb.dll

  Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands and press ENTER after each command:
  net start bits
  net start wuauserv
  net start Eventlog
  output

  Luck!

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I can't register for Windows update and receive the error code 0 x 80070002 when I try.

  When I try to solve the problem by following the instructions, I'm unable to start or stop the automatic updates in the field of Services. When I click with the right button on automatic updates and then click Start, I get the following error message: error 2: the system cannot find the specified file.

  When I go to Windows Update and the attempt to revise my story to update, I get error 0 x 80070002 there as well.  Anyone have any ideas?  The other proposed problem was to remove the contents of the Datastore folder after you type %windir%\SoftwareDistribution in the run dialogue box, but I do not have a Datastore, just the two following folders folder: installation and WuRedir.

  Hello

  Rename the folder c:\Windows\SoftwareDistribution softwaredistribution.old

  Restart the computer and then try to update.

  Check the two links below

  http://support.Microsoft.com/kb/910336

  http://support.Microsoft.com/kb/922582

  If it does not work, try a SFC scan and then try to update, follow the article below to run a sfc scan

  http://support.Microsoft.com/kb/936212

  Peace be upon U

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  Download and install it manually. Click HERE download Service Pack 3. Save the file to your desktop. Double-click the file and follow the prompts to install. Make sure that you disable security software like antivirus scanners or spyware before you run the file sp3.

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• I tried with windows update and manually to download vista service pack 2, but these two don't

  I tried with windows update and manually download vistal SP2 but fails both: the process takes time and when download reaches 100% there is a message that says that the file is corrupted in the disk, I tried to check readers for bad mistakes, too, but the same problem persists.

  It may be a corrupted catalog file.  However, it can also be a corrupted system file.  In the latter case, the System File Checker may be able to fix it.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Alternatively, you can try to install clean or safe mode boot mode.  See

  http://support.Microsoft.com/kb/331796

  The procedure should work the same for Windows 7 and Vista.

  Enter the Mode safe mode by starting the cold computer and pressing the key function F8 repeatedly as soon as the manufacturer splash screen appears.

• Cannot install Windows updates and updates Antivirus on Windows Vista

  Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.

  OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.

  Hello

  ·        What happens when you try to update windows? You get the error message?

  ·        What are the updates you are trying to install (KB number)?

  ·        What security software you use?

  I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.

  Note: Activate security software once you've done the test.

  Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Step 1:

  It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.