Hoe ik het find/replace window to reset?
Op een of andere handle is mijn find/replace window heel groot geworden (zie screenshot). ER komen geen pijltjes aan zijkant van het window body ik hem opnieuw kan cavity to add performance close InDesign opnieuw opstarten ook niet en niet. Iemand advice?
Echt, geloof me: wissen van het I voorkeuren works. Het lijkt erop dat I told niet dat goed there would...
Tags: InDesign
Similar Questions
-
Find/replace highlights the bad code
Hi, if you use find it normal and the search for specific text in my AS3 class file, it highlights the right position where he finds corresponding text, but when I use the search/replace completely it messes up, it highlights the text wrong in my code, but it displays the correct position in the Find/Replace window. Is there a way to fix this, or is this a known bug? See attached screenshot.
Hello
Thanks for sharing the file.
The problem is with the end of Line (EOL) character. The file uses a rating of CR at the end of his LIFE and has been used in Mac OS 9 and Mac OS 9 version. When a file is created using one of these versions of Mac OS and then the EOL character would be CR which is now obsolete and is not recognized by many modern text editors.
If the EOL is LF or CR | LF then search and replace will work as expected in Flash CC.
You can change the end of LIFE of the file to open and save the file in Wordpad that will change the EOL to CR | LF.
Hope this information helps you solve your problem.
Thank you!
Mohan
-
I don't remember my password for mail electronic windows and can not find a way to reset
Icannot remember the password for windows mail the remember me box became disabled and I can't find a way to reset
Hello
I suggest you go to the following Microsoft article and check if it helps.
Microsoft's strategy concerning lost or forgotten passwords: http://support.microsoft.com/kb/189126Hope the information is useful.
-
Please HELP replace Windows 8 with Windows 7?
Hi all. Replacing Windows 8/8.1 with Windows 7 on my father-in-law's cell phone.
I have no problem removing Windows 8 and Windows 7 installation. I have some comes to find the proper drivers.
News of the machine:
HP Pavilion G7 series (Intel based)
Model # C5E41UA #ABA
[Edited by Moderator] Serial No.
Thanks in advance!Hello:
You should be able to use all the W7 x 64 drivers and this model on your software.
Your model uses the Ralink wireless network card driver and the Intel HD graphics driver.
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
-
How to replace Windows 8 with Windows 7 on a Compaq CQ58
Hello!
Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:
1. it is posible to change 06:52 on my laptop CQ58?
2 and if so, can I have programs default HP on this subject?
3 and if so, how?
When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.
The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.
1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.
2 and if so, can I have programs default HP on this subject? NO.
3 and if so, how?
WARNING *.
HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.
After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.
If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.
In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".
I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.
From the top...
(1) turn on the computer and immediately start typing the key "ESC".
(2) when the MENU is displayed, press "F10".
3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.
4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"
5) press "F10" and click "YES" to "Exit Saving Changes".
(6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".
(7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.
(8) to turn on the computer and immediately start typing the key "ESC".
(9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.
(10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".
11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".
(12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...
(13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".
(14) follow all instructions and meet the need. Enter the Windows 7 key when asked.
(15) download and install the drivers from the support page for your computer.
After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Hoe komt het dat als ik p.c. opstart ik lack keer het bericht dat the system treat is hersteld van een ernstige hell.
Of handtekening van of hell is: code 1000008e JIU. BCP1 BCP2 0000005 BD210CDC BCP3:AB9D287C BCP4 00000000 SP:3 OS Ver: 5 - 1-2600-0256-1 productER zijn verder geen gevolgen van of laughing at van het herstelTeddy W.BoltzePlease select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
Kies uw taal vervolgkeuzelijst onderkant van aan ITU of pagina om your question you posten in Taal van uw keuze. Post on the forum without jij het is voor Frans. ALS I niet vinden baking taal, support van jullie voor boven additional international Geraardsbergen kan
http://answers.Microsoft.com/nl-NL/site/setlocale?URL=http%3A%2f%2Fanswers.Microsoft.com%2Fnl-NL%2Fwindowslive%2Fforum%3Ftab%3Dunanswered
-
Dear Sir/Madam,
Yesterday, I downloaded Microsoft Internet Explorer 8 web from Microsoft Download Center.
After downloading Microsoft Internet Explorer 8, I can't open any icons in the control panel.
On display is come information that Windows cannot find 'C\WINDOWS\system32\rundll.32.exe '.
Help, please. Thanks Gene.
Thanks Gene.
Dear:
: Running sfc/scannow will not replace the missing rundll32.exe file.
Why you post methods that do not work and will be just wasting time?
Hove you never even seen this problem before, tried to recreate it so that you can actually see, or have you never really fixed?
Why you learn not what sfc/scannow does and does not do?
Here is a simple test to you and all your colleagues in the technical support engineer:
Rename or delete just your c:\windows\system32\rundll32.exe file is "missing".
Rename rundll32.exe---> rundll32.xxx
If you started normally, before you can blink, the 'missing' rundll32.exe file quickly and quietly replace the copy in the dllcache folder. It is the Protection of Windows file in action and you will see something like this in the Event Viewer log system:
Event type: Information
Event source: Windows File Protection
Event category: no
Event ID: 64002
Description:
File replacement was attempted on the protected system file c:\windows\system32\rundll32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5512.I beg you to perform this simple test to know how the sfc/scannow:
Boot your system to Safe Mode or the recovery for the Windows File Protection Console does not run.
For this example, we will use the system critical file rundll32.exe.
Rename or delete your c:\windows\system32\rundll32.exe.exe file so the file is now "missing."
A critical file, is it true? It is on the list of the file 3498 knows the Protection of Windows and SFC files, but now he isn't.
If Windows File Protection is running, the "missing" file would be quickly and silently replaced (try to rename or delete it in normal mode and it will be quickly and quietly replaced).
Now, with your file rundll32.exe missing, start in Normal mode and try to use something like control panel to open something like Power Options and you'll see that familiar message:
Control Panel
Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '. Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search.Now you have recreated a common problem with the missing file and seen the error of our own eyes. A Microsoft Support Engineer will usually suggest running sfc/scannow for this kind of problem, but it will not work or help and you can prove it to yourself, and now you have reproduced the error.
You follow own advice and run sfc/scannow to the end.
The rundll32.exe is always had disappeared, right? Did run sfc/scannow replace the missing critical system file?
How can he be so sfc/scannow is supposed to replace the missing system files? This is because it is not this that sfc/scannow does.
Now you know sfc/scannow does not. He did not replace your missing system file (don't forget to put your rundll32.exe back so you will have a).
Now, go to c:\windows\system32\dllcache and delete or rename the file rundll32.exe from there - and it will be gone and not replaced automatically because the Windows File Protection does not seem after this record.
Run sfc/scannow in full again.
Replace the file rundll32.exe missing in the dllcache folder, since it handles missing files (not the system32 folder) IS the folder that sfc/scannow.
Now you know sfc/scannow does.
Do you need help to know too much about the corrupt system files?
Since most people do not have a genuine XP bootable installation CD, they will not be able to develop a copy of the file that is missing from the installation CD, they have not.
After some directions on how to replace the file when the user has no XP bootable installation CD authentic and that will be useful to all.
If you don't know how to say "I don't know how" and I'll help you.
You want to inform/warn the poster that SP3 is installed that running sfc/scannow will take a long time for the installation of SP3 CD?
If you do not have a CD with the same Service Pack as your installation (most people don't), the posters are in for a rough and frustrating time.
Of course this will help with the detachment of the Ministry of Education of the impossible to try things that don't work, but I thought I'd throw it out there for the 100th time.
-
Windows start up RUNDLL error: could not find C:\WINDOWS\fsrsap.dll
original title: Error MessageI keep geetting RUNDLL error: cannot find C:\WINDOWS\fsrsap.dll at startup. How to replace these files?
It is always sensible in this situation to achieve a malware check
Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
Download and run SuperAntiSpyware (Free Edition)
-
I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk
I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk
Hello
- When you receive this error message?
- What were the changes made before the issue started?
Try the SFC scan on the computer.
SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.
Original title: windows cannot find c:\windows\system32\control.exe
Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE
Hello
1. What is the brand and model of the computer?
2. What is the security software installed on the computer?
3. have you made changes on the computer recently?
Method 1.
Start the computer in safe mode and check.
Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode
If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.
Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 2.
I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833
Method 3.
You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
I hope this helps.
-
Windows cannot find C:\WINDOWS\system32\rundll32.exe error message
original title: I still need help... help please! Windows cannot find C:\WINDOWS\system32\rundll32.exeHello, I have windows vista and when I try to open certain programs, like Adobe or change the time in the control panel............... etc... the computer says... error loading Rundll specified module could not be found or Windows cannot find C:\WINDOWS\system32\rundll32.exe. I looked at the website of the doug knoxs, but all the EXE patches are for XP and it would not have worked... im a little stuck... What can I do?
I tried running a scan in command line but it does not help... affecting its programs to update like spotify and adobe and I can not change the settings of the clock...
any ideas...
Thank you
OllieHello
Rundll32 errors can be caused by malware.
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
Windows cannot find C:\WINDOWS\system32\dfrgui.exe
When I try to defrag I get the message that cannot find C:\WINDOWS\system32\dfrgui.exe
I am also unable to back up data on external hard drive
Hello
It is the result of malware, then do a very thorough check and when the system is
clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Trying to find the windows base office
Started having problems in February, spoke with many support technicians. Last suggestion was to restore the laptop. This did not work, eventually send off to be repaired. Pieces of equipment replaced, repaired or diagnosed have summer-Fan Assembly, hard drive, radiator Assembly, wireless network card. The operating system that is restored with OS disk. Now that he's back at home, I can't find the windows base Office. I'm running in circles. Help, please.
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
And for the Office of the questions:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
See you soon.
Mick Murphy - Microsoft partner
-
Where can I find my Windows product key?
I have my windows installation genuine disc, but can't find my product key
I had to reload windows and she asked my product key. I find CN can't - it is anyway they can return m key?
Where to find your product key
You can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.
If you purchased from the Microsoft Store:
Buy a product key of Microsoft Store:
Microsoft Store: http://store.microsoft.com/home.aspxLost or misplaced product key (certificate of authenticity)
http://support.Microsoft.com/kb/824433
How to get a replacement product key?
To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:
http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS
For more information on this topic, visit http://support.microsoft.com/kb/811224
-
Registration for the web function has stopped working in my copy of photoshop elements 12. I get this message "the operation could not be completed. The system cannot find the path specified"reset preferences was not fixed.
My os is windows 7. elements of 12 worked fine for several months and then save for web stopped working
Maybe you are looking for
-
Problems of configuration to use my own email on a MAC
I'm on my work computer. I'm trying to implement using Thunderbird. He will not grant me access to use my own email address (says wrong password), but I'm just now the creation for the first time. I tried the system administrator password and that no
-
After fighting the photos 'upgrade' included with El Capitan, I managed to return to iPhoto 9.0.9 before has been damaged. Subsequently located iPhoto 9.6.1 and plan to use it. Now more cautious than ever with the software Apple "upgrades", I would
-
With the help of the command on paper by emission of GPIB Tektronix TDS540
-
Im getting a 80004005 error message when Im trying to download my photos from my iphone to my computer, please help fix me
-
I think that the toolbar is too long, is there a way to shorten? It is as long as my computer screen and it bothers me because it's a little too big, don't you think? I use Windows vista btw. Vista with an 'i' not a 'y '.