Hoe kan ik met windows dvd maker volunteers projecten op 1 dvd branden?

Similar Questions

• Burning defective DVDs of a movie created in Windows Movie Maker 2.6

  I did my camera video clips in avi format. format, & then enters a movie with windows movie maker 2.6, the movie plays correctly on my computer, but when you run in windows dvd creation, it will not 'Preview', & then burn on a dvd, this dvd in a jumble corrupt & Bacon of colors, the sound is ok. I did have a problem in the past. Any ideas?

  Thank you volunteers J for you help. I tried everything to get the dvd creation to work, but eventually I used the freemaker to redo the conversion in avi, & then used the freemaker dvd burner which worked perfectly, gave beautifully clear widescreen images. LTA 28

  =======================================
  You are welcome and thank you for the comments.

• Not possible to burn a DVD on the Satellite A100-338 using Windows DVD Maker

  I have a Toshiba Satellite A100. I'm trying to burn a DVD using Microsoft Windows DVD Maker and a Sony DVD - RW. The laptop has a carpet * a DVD-RAM UJ-850 s ATA device.

  When I try to burn a DVD, a progress bar appears and is about 2% before the hanging.

  I also tried to format the DVD first, and which is progressing well before coming up with an error message saying that the drive could not be formatted.

  Anyone got any ideas? Am I missing something completely obvious?

  Hello

  the following things could probably help you with your problem:

  -> control if a new BIOS for your machine and a new FIRMWARE update for your DVD player are available. Update the BIOS and the player firnware
  -> use another applications burning like Nero, CDBurnerXP or other thing that is usually know work well with almost all DVD - RW readers out there
  -> use a DIFFERENT brands of DVD media because the carpet * a readers are really picky

  If all these steps fail, then it is possible that your drive is defective and must be replaced.

  See you soon

• M30X MultiDrive won't burn a DVD from Windows Movie Maker

  Hello

  My MultiDrive M30x will not burn the DVD from Windows Movie Maker and other applications.

  I also had problems with burning CDs (unbranded) of Windows XP, built in utility.

  The multidrive has problems with cheaper brand discs?

  Just to note,
  The laptop was to support guys three times until various issues.
  (1) the hard drive failed.
  (2) the multidrive has failed.
  (3) the motherboard replaced, due to power outages, it would not charge the battery, or recognize that the AC adapter is plugged.

  Note: The hard drive, not the fan made the most noise in mine!

  Thank you

  Hello

  As far as I know (i.e. pre-installed burning software Save now, drag-and - drop) disabled the option of Windows XP burning. In this case if you want to use the Movie Maker or Windows media player burning option, you need to activate this possibility.
  Please, go to the properties of the drivers (right click). Please select the recording tab. CD recording option on this drive must be marked.
  I use the software Nero burning and in my opinion he of one of the best burning programs. In addition, you should try different manufacturers CD/DVD because some CD and DVD is not compatible with some readers. Check the TDK CD and DVD. I never had no problem with these media.

  Best regards

• Windows Dvd maker has left the audio recording

  Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?

  Hello

  Windows DVD maker has all the features as other programs.  I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.

  I use Roxio 2012 Pro to my video, burn them to DVD.

• How can I get the clips in record full-time instead of the 25seconds (which seems to be set) when using windows DVD maker

  How can I get the clips in record full-time instead of 25 seconds (that they seem to be defined) using windows DVD maker

  Hi LorraineDawson,

  Here's a walkthough troubleshooting on this issue:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  hope this helps

  B Eddie

• Conversion of project movie maker Windows DVD player

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  Can a project created with windows movie maker (and shown through media player) be converted so that it plays in a normal DVD player? If so, how?

  ========================================
  Yes... and since you post in the XP forum... you
  must run XP with Movie Maker 2.1?

  OK, you need to save your project in .avi or .wmv
  film format. Then you need DVD Aurhoring software for
  create a video DVD. The software free DVD Flick can do...
  (How to record in .wmv or .avi... pasted below)

  DVD Flick
  http://sourceforge.NET/projects/dvdflick/

  (the file you need to download and install is:)
  "dvdflick_setup_1.3.0.7.exe")

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Here are some basic instructions:

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.
   
  Finally... Here's how to Save Movie Maker:

  To save in a .wmv movie file...
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a .avi movie file...
  (and other options)
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why a DVD recorded from Windows Movie Maker will not play on certain DVD players connected to your TV? How can you fix it so it will play?

  Why not a movie made Windows Movie Maker - do NOT play on some DVD players?  What can I do for the DVD player to allow the DVD to play?

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-DVD-Maker-videos-i-produce-wont-play-on-my/549c3c40-F02C-43b5-961f-6aa121197993

• How to make a dvd using windows movie maker

  How to create a dvd with movie maker. film downloaded from camara tried to create a dvd, but it won't let me it will only do CD that I can't read on my computer or dvd player

  The only version of XP WIndows Movie Maker who has
  a DVD option is WIndows XP Media Center Edition 2005.

  You need DVD creation software to create a DVD-video...
  the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Windows Movie Maker, save my video on DVD

  Original title: Windows Movie Maker.

  I have Windows Movie Maker, I have XP Home + SP3, how do I save my video to DVD (I can use CD, why? * address email is removed from the privacy *)

  To burn a dvd, you need third-party software for dvd authoring, you should have something like nero or roxio installed with your dvd writer.
  Use this application to create a dvd-video disc.

• Make another copy of the DVD from a DVD created from Windows Movie Maker

  My laptop was stolen recently and, with it, a slideshow (with audio) I had created on Windows Movie maker.  I have a disc I created after the completion of the project.  He plays very well on an external DVD drive.  However, when I download it on my new laptop or try to copy it to another disk, it does not copy as a movie.  It seems that it changes the formats and any copy I made will not play on an external DVD drive.  Is there a copyright protection or something embedded on discs created from Movie maker.  Any advice on how to make a playable copy would be appreciated.

  No copy protection is used.

  How are you trying to copy it?

  You will need something like roxio or nero and their software disc in copy, or import the movie in movie maker and then recreate the dvd disc again from scratch in your creation to dvd.

• Is there a limit of 60 minutes, on images that Windows Movie Maker can record on a DVD?

  Windows Movie Maker says something like: "video may not match the disk.» Make sure you have only 60 minutes of video on storyboard table".  Is - this WMM all can handle?  It's a standard 4.7 GB DVD-R.

  Windows Movie Maker says something like: "video may not match the disk.» Make sure you have only 60 minutes of video on storyboard table".  Is - this WMM all can handle?  It's a standard 4.7 GB DVD-R.

  ========================================
  In general... a 4.7 GB DVD will take 1 hour of high-quality video.

  Some DVD Authoring software uses compression to increase
  the duration.

  The following freeware might be worth a try... on the
  screen where you add files in the left column, there is a bar...
  If it turns red, you've added too many files.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker, Media Center, DVD Creator, does not recognize that I have an engraver of DVD/CD operation to date.

  I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

  I have a Dell with Windows XP Media Edition desk top. I was always able to create movies using Windows Movie Maker and also by Media Edition and burn them to a DVD and a CD even. I can play any CD or DVD in the readers, however, I can't save or burn more. I get error 19 asking me to make sure I have a recorder. Whatever program I am in does not recognize that I have a DVD/CD burner. I have uninstalled and reinstalled software, scanned the players only to discover that they are up-to-date and are working properly. Except that they are not work properly. I have a TSST corp DVD +-RW TS - H553A I do most of my record with. I have been to Fix Windows and he's always broke. Any ideas?

  =================================
  It is possible that you have a hardware problem with
  your burner but... the following article might
  be worth a visit:

  (314060) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• Windows DVD Maker will not accept video files

  Hello

  I used Windows dvd Maker in the past to convert and burn avi files to a dvd that can be played in my dvd player.  Today when I inserted a video avi in DVD Maker I get the following message:

  "0 files have been added.  1 file could not be added.  The C:\User\Public\Video\Alien.avi file is invalid or damaged

  I tried to import 10 + videos Dvd Maker and got the same message for them all.

  My OS is Vista

  Thank you.

  Hello

  I used Windows dvd Maker in the past to convert and burn avi files to a dvd that can be played in my dvd player.  Today when I inserted a video avi in DVD Maker I get the following message:

  "0 files have been added.  1 file could not be added.  The C:\User\Public\Video\Alien.avi file is invalid or damaged

  I tried to import 10 + videos Dvd Maker and got the same message for them all.

  My OS is Vista

  Thank you.

  If you don't mind a liitle experience...

  Choose one of your avi files, use a video converter, change it to WMV format.
  Add the WMV to dvd creation. He accept?

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Movie Maker DVD will not play in my DVD of Emerson drive

  Burned DVD won't play in my dvd player. I worked on it for three days. I burned a movie on a dvd + rw disc. The film will play on my computer but won't play in my dvd player. I get "Disk error" on the screen and the disc may not have playback function. What is the function of reading and how I can change my download? I lived all the concepts of self-help, but none of them fit to my problem. I have Windows Vista Premium and have tried using Windows DVD Maker. I called the manufacturer of my drive and they said I need to finalize the disc. How can I do to do this with Windows DVD MAKER?  I read articles about video editing, but when I went through the steps that I wasn't even offered the possibility to publish the video. My brother uses the same discs when burning movies and I have no problem playing his films. What I am doing wrong?

  Hi BrookeMcCulley,

  Welcome to the Microsoft Answers community.

  On some of the DVD player, you will not be able to play DVD + RW discs.  You will need to use DVD + r (read DVD) drive and check if it works.

  You can also try to use another brand of DVD disc and check.
  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/close-or-finalize-a-CD-or-DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support